内に含ま
その他のドキュメント
サポート リソース
|  PDF 文書ファイルをダウンロードする (1203 KB)
| | | |
| Numbers and Symbols |
|
| 24-bit FC addressing devices (  ) |
| | | |
| A |
|
| ANSI standard Multipath Management API ( ) |
|
| Ap_Id ( ) |
|
| automatic failback, configuration ( ) |
| | | |
| C |
|
| cfgadm ( ) |
| | -c ( ) |
| | -l ( ) ( ) |
|
| cfgadm -al -o show_SCSI_LUN ( ) ( ) |
|
| cfgadm -c unconfigure ( ) |
|
| cfgadm(1M) ( ) |
|
| cfgadm configure ( ) |
|
| cfgadm_fp(1M) ( ) |
|
| configuration |
| | device ( ) |
| | dump ( ) |
| | fabric devices ( ) |
| | FCoE ( ) |
| | Fibre Channel overview ( ) |
| | manual ( ) |
| | multipathing ( ) |
| | SAS devices ( ) |
| | tasks ( ) |
|
| configure |
| | automatic failback ( ) |
| | fabric-connected devices ( ) |
| | multipathing feature ( ) ( ) |
| | NPIV ports ( ) |
| | SAN devices ( ) |
| | SAS devices ( ) |
| | third-party devices ( ) ( ) |
| | virtual Fibre Channel ports ( ) |
|
| considerations |
| | device name changes ( ) |
| | device specific ( ) |
| | fabric boot devices ( ) |
| | IPFC ( ) |
| | multipathing ( ) |
| | multipathing, enabling and disabling ( ) |
| | per-port configuration ( ) |
| | SAN devices ( ) |
| | SAS devices ( ) |
| | stmsboot command ( ) |
| | StorageTek Traffic Manager ( ) |
| | third-party device configuration ( ) |
| | | |
| D |
|
| device |
| | asymmetrical ( ) |
| | configuration ( ) |
| | storage ( ) |
|
| device management ( ) |
|
| devices, tape ( ) |
|
| disabling, multipathing ( ) |
|
| discovery |
| | dynamic ( ) |
| | SAS devices ( ) |
| | | |
| E |
|
| enabling, multipathing ( ) |
| | | |
| F |
|
| fabric-connected host ports ( ) ( ) |
|
| fabric device configuration ( ) |
|
| fc-fabric ( ) |
|
| FCAL ( ) |
|
| FCoE |
| | configuring ports ( ) |
| | creating ports ( ) |
| | deleting ports ( ) |
| | limitations ( ) |
| | reporting status on ports ( ) |
|
| Fibre Channel |
| | arbitrated loop ( ) |
| | booting Solaris 10 x86/x64 ( ) |
| | configuration overview ( ) |
| | configuring IPFC SAN devices ( ) |
| | determining adapter port instances ( ) |
| | enabling and disabling multipathing ( ) |
| | HBA ( ) |
| | IPFC considerations ( ) |
| | listing LUN level information ( ) |
| | multipathing configuration ( ) |
| | supported HBA interfaces ( ) |
|
| Fibre Channel ports, configuring ( ) |
| | | |
| I |
|
| initiator ports, displaying properties ( ) |
|
| Internet Protocol over Fibre Channel, See IPFC |
|
| IPFC, considerations ( ) |
| | | |
| L |
|
| limitations, FCoE ( ) |
|
| logical units, listing ( ) |
|
| LUN |
| | masking ( ) |
| | recognition ( ) |
| | SCSI devices ( ) |
|
| luxadm(1M) ( ) |
| | | |
| M |
|
| modinfo ( ) |
|
| mpathadm commands ( ) |
| | automatic failback, configuring ( ) |
| | configure automatic failback ( ) |
| | disable a path ( ) |
| | enable a path ( ) |
| | initiator ports |
| | | discovered ( ) |
| | | properties ( ) |
| | logical unit with a particular name ( ) |
| | logical units |
| | | associated with target port ( ) |
| | | discovered ( ) |
| | | fail over ( ) |
| | | properties and associated path ( ) |
|
| mpt driver ( ) |
|
| Multipath Management API plug-in |
| | library ( ) |
| | properties ( ) |
|
| multipathing |
| | boot considerations ( ) |
| | configuring automatic failback ( ) |
| | configuring device nodes ( ) |
| | configuring third-party storage devices ( ) |
| | disabled, device node configuration ( ) |
| | disabled, multiple device configuration ( ) |
| | enabling and disabling ( ) |
| | enabling and disabling on a per-port basis ( ) |
| | fabric device node configuration ( ) |
| | features ( ) |
| | manual configuration ( ) |
| | mpathadm command ( ) |
| | SAS boot device configuration ( ) |
| | SAS considerations ( ) |
| | support ( ) |
| | troubleshooting ( ) |
| | | |
| N |
|
| NPIV ports, configuring ( ) |
| | | |
| P |
|
| per-port configuration |
| | considerations ( ) |
| | enabling and disabling multipathing ( ) |
|
| persistent binding of tape devices ( ) |
|
| physical device ( ) |
|
| Promiscuous mode ( ) |
| | | |
| R |
|
| REPORT LUNS command ( ) |
| | | |
| S |
|
| SAS devices |
| | configuration ( ) |
| | dynamic discovery ( ) |
| | multipathing considerations ( ) |
|
| sd driver ( ) |
|
| Serial Attached SCSI, See SAS |
|
| show_SCSI_LUN ( ) ( ) |
|
| snoop(1M) ( ) |
|
| Solaris 10 x86/x64 FC OS booting procedure ( ) |
|
| ssd driver ( ) |
|
| st driver ( ) |
|
| stmsboot command ( ) |
| | boot considerations ( ) |
| | considerations ( ) |
| | determining device paths ( ) |
| | enabling and disabling multipathing ( ) |
| | SAN device considerations ( ) |
| | system crashes ( ) |
|
| storage device ( ) |
| | | |
| T |
|
| T10 standard ( ) |
|
| T11 standard ( ) |
|
| tape device persistent binding ( ) |
|
| To Detect Fabric Devices Visible on a Host ( ) |
|
| troubleshooting, multipathing ( ) |
|
