Chapter 1 Product Overview

This chapter provides an overview of the Sun StorageTek Traffic Manager software, and covers the following topics:

About Sun StorageTek Traffic Manager

The Sun StorageTek Traffic Manager software enables multipathing connections for Sun Solaris Express Developer's Edition OS hosts. Multipathing provides higher availability for storage devices through the use of multiple access paths. Fibre Channel (FC), Serial Attached SCSI (SAS), and Internet Small Computer Storage Interface (iSCSI) protocols are supported.

The Sun StorageTek Traffic Manager software resides on the host and identifies the storage devices on your SAN or SAS Domain. The software enables you to attach Fibre Channel storage in either loop, fabric, or point-to-point mode. The software provides a common interface for managing both Fibre Channel and SAS storage.

For information on how to configure targets and initiators in preparation for multipathing, see the following:

COMSTAR Administration Guide, to configure a COMSTAR Fibre Channel target: http://opensolaris.org/os/project/comstar/Documentation/AdminGuide
Chapter 14 of the Solaris 10 System Administration: Devices and File Systems Guide, to configure Solaris iSCSI targets and initiators

What's New?

Support for NPIV is included in the Solaris Express Community Edition (SXCE) Build 92, and all subsequent builds.

NPIV is a Fibre Channel facility that enables one Fibre Channel adapter to have many N Port IDs. Each N Port has a unique identity (port WWN and node WWN) on the SAN and can be used for zoning and LUN masking. Soft zoning, which you can use to group ports together by port WWN, is the preferred method of zoning. For more information, see Chapter 6, Configuring Virtual Fibre Channel Ports.
Support for Fibre Channel over Ethernet (FCoE) is included in the SXCE Build 122, and all subsequent builds.

Fibre Channel over Ethernet (FCoE) is a proposed standard that is being developed by INCITS T11. The FCoE protocol specification maps Fibre Channel natively over Ethernet and is independent of the Ethernet forwarding scheme. The protocol provides I/O consolidation by preserving all Fibre Channel constructs, maintaining the same latency, security, and traffic management attributes of FC, while preserving investments in FC tools, training, and SANs. For more information, see Chapter 7, Configuring FCoE Ports.

Software Features

The Sun StorageTek Traffic Manager software enables multipathing connections for the Sun Solaris Express Developer's Edition OS hosts, with the following software features:

Fibre Channel Software Features

The Sun StorageTek Traffic Manager software provides the following key features:

Dynamic Storage Discovery – The software automatically recognizes devices and any modifications made to device configurations. This feature makes devices available to the system without requiring you to reboot or manually change information in configuration files.
Persistent Device Naming – Devices that are configured within the software maintain their device naming through reboots or reconfiguration. The only exception to this policy are tape devices found in /dev/rmt that will not change unless they are removed, and then regenerated at a later date.
Fibre Channel Arbitrated Loop (FCAL) Support – OpenBoot^TM PROM (OBP) commands that are used on servers can access FCAL attached storage for scanning the FC loop.
Fabric Booting – The Solaris OS supports booting from fabric devices as well as non-fabric Fibre Channel devices. Fabric topologies with Fibre Channel switches provide higher speed, more connections, and port isolation.
FC-HBA Library – What was previously known as the Storage Networking Industry Association Fibre Channel host bus adapter (SNIA FC-HBA) library is now known as the FC-HBA library. The FC-HBA library application programming interface (API) enables management of FC HBAs and provides a standards-based interface for other applications (such as Sun StorEdge^TM Enterprise Storage Manager) that can be used to gather information about FC HBAs.

Man pages for common FC-HBA APIs are included in the Solaris Express Developer's Edition OS in libhbaapi(3LIB). For additional information about FC specifications, refer to http://www.t11.org.
Fibre Channel Virtualization – N Port ID Virtualization (NPIV) is an extension to the Fibre Channel standard, which enables one Fibre Channel port to simulate many ports on the SAN. This is useful for virtualization environments such as xVM.
Fibre Channel over Ethernet (FCoE) – A new T11 standard to transport encapsulated Fibre Channel frames over Enhanced Ethernet is now available. Solaris FCoE is a software implementation that is designed to work with normal Ethernet controllers.

SAS Software Features

Dynamic Storage Discovery – The Solaris OS Storage Multipathing software automatically recognizes devices and any modifications made to device configurations. This makes devices available to the system without requiring you to reboot or manually change information in configuration files.
Persistent Device Naming – Dynamic Storage Discovery Devices that are configured within the Solaris OS Storage Multipathing software maintain their device naming through reboots or reconfiguration.

Multipathing Software Features

The Solaris Express Developer's Edition OS contains the Sun StorageTek Traffic Manager software. The software is enabled by default for x86-based platforms and optional for SPARC-based platforms. The software contains the following features:

Path management – The Sun StorageTek Traffic Manager software dynamically manages the paths to any storage devices it supports. The addition or removal of paths to a device is done automatically when a path is brought online or removed from a service. This feature enables hosts configured with the software to begin with a single path to a device and add more host controllers, increasing bandwidth and RAS, without changing device names or modifying applications. Sun storage does not require configuration files to manage or databases to keep current. For storage other than Sun, contact your storage vendor for methods to enable support and to ensure it is qualified with the Sun StorageTek Traffic Manager software.
Single Device Instances – Unlike other multipathing solutions, the Sun StorageTek Traffic Manager software is fully integrated with the Solaris Express Developer's Edition OS. The software displays multipath devices as single device instances instead of as one device, or device link, per path. This feature reduces the cost of managing complex storage architectures utilities such as format(1M) or Sun Solaris OS Volume Manager, to “see” one representation of a storage device instead of a separate device for each path.
Failover support – Implementing higher levels of RAS requires redundant host connectivity to storage devices. The Sun StorageTek Traffic Manager software manages the failure of storage paths while maintaining host I/O connectivity through available secondary paths.
Symmetrical/Asymmetrical device support– The Sun StorageTek Traffic Manager software supports the following disk storage devices:
- All Sun disk storage, both symmetric and asymmetric
- All T10/T11 standards-compliant non-Sun symmetrical disk devices
- Many non-Sun asymmetrical disk arrays
  
  Note –
  T10 ALUA support has been added for asymmetrical devices that support this T10 standard. Contact your storage vendor to see whether your device is supported.
I/O load balancing – In addition to providing simple failover support, the Sun StorageTek Traffic Manager software can use any active paths to a storage device to send and receive I/O. With I/O routed through multiple host connections, bandwidth can be increased by the addition of host controllers. The software uses a round-robin load-balancing algorithm by which individual I/O requests are routed to active host controllers in a series one after the other.
Queue depth – SCSI storage arrays present storage to a host in the form of a logical unit number (LUN). LUNs have a finite set of resources available, such as the amount of data that can be stored, as well as the number of active commands that a device or LUN can process at one time. The number of active commands that can be issued before a device blocks further I/O is known as queue depth. When the Sun StorageTek Traffic Manager software is enabled, a single queue is created for each LUN regardless of the number of distinct or separate paths it may have to the host. This feature enables the disk driver to maintain and balance one queue to the LUN, effectively managing queue depth. No other multipathing software available for the Solaris Express Developer's Edition OS has this ability.
stmsboot command – The Solaris Express Developer's Edition OS includes the stmsboot(1M) command, which allows you to enable or disable the Solaris OS Multipathing software on your boot device after the OS installation has been completed. This command is available for both SPARC and x86/x64 systems, and provides support for SAS multipathing with the Solaris Express Developer's Edition OS.

SAS multipathing is not enabled by default in the Solaris Express Developer's Edition OS for either SPARC or x86/x64 hosts, so use of the stmsboot command is required as a post-installation step if you wish to enable Multipathing.

SPARC hosts do not enable multipathing for Fibre Channel devices by default, so use of the stmsboot command is required as a post-installation step.

X86/x64 hosts do enable multipathing of Fibre Channel devices by default, so the use of the stmsboot command is not mandatory as a post-installation step.
Dynamic reconfiguration – The Sun StorageTek Traffic Manager software supports the Solaris Express Developer's Edition OS dynamic reconfiguration (DR).

Supported Standards

The Sun StorageTek Traffic Manager software is based on open standards for communicating with devices and device management, ensuring interoperability with other standards-based devices and software. The following standards are supported by the Sun StorageTek Traffic Manager software:

ANSI Standard: Information Technology – SNIA Multipath Management API Specification (ANSI INCITS 412-2006)
T10 standards, including SCSI-3, SAM, FCP, SPC, and SBC
T11.3 FC standards, including FC-PH, FC-AL, FC-LS, and FC-GS
T11.5 storage management standards, including FC-HBA
IETF standards, including RFC 2625
Serial Attached SCSI-2 (SAS2)