Chapter 4 Configuration Worksheets
This chapter contains the worksheets for gathering configuration information
that is required during a Configure Now installation. These worksheets are
companion tools for working with the configuration information in Chapter 3, Configuration Information. Worksheets
are included only for the product components that can be configured by the Sun JavaTM Enterprise System (Java ES)
installer.
This chapter contains the following sections:
Common Settings Configuration Information
For detailed explanations of the fields in this worksheet, refer to
the tables under Common Server Settings
Table 4–1 Common
Server Settings Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host Name
CMN_HOST_NAME
|
Your data: _____________________________________________________
The default value is the local host name. For example, mycomputer.
|
|
DNS Domain Name
CMN_DOMAIN_NAME
|
Your data: _____________________________________________________
The default value is domain name for the local host. For example, .example.com.
|
|
Host IP Address
CMN_IPADDRESS
|
Your data: _____________________________________________________
The default value is the IP address for the local host.
|
|
Administrator User ID
CMN_ADMIN_USER
|
Your data: _____________________________________________________
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Administrator Password
CMN_ADMIN_PASSWORD
|
Your data: _____________________________________________________
Note: If you chose to use a single administrator account, this field
is not present.
|
|
System User
CMN_SYSTEM_USER
|
Your data: _____________________________________________________
The default value is root.
|
|
System Group
CMN_SYSTEM_GROUP
|
Your data: _____________________________________________________
The default value is root.
|
Access Manager Configuration Information
This section contains worksheets for the following topics:
Access Manager Administration
For detailed explanations of the fields in this worksheet, refer to
the tables under Access Manager Administration Information.
Table 4–2 Access Manager Administration
Information Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Install type
AM_REALM
|
Your data: _____________________________________________________
Legacy mode used by default.
|
|
Administrator User ID
IS_ADMIN_USER_ID
|
Your data: amadmin
Cannot be changed.
|
|
Administrator Password
IS_ADMINPASSWD
|
Your data: _____________________________________________________
(must be at least eight characters)
|
|
LDAP User ID
IS_LDAP_USER
|
Your data: amldapuser
Cannot be changed.
|
|
LDAP Password
IS_LDAPUSERPASSWD
|
Your data: ______________________________________________________
Restriction: Must be different from Administrator Password.
|
|
Password Encryption Key
AM_ENC_PWD
|
Your data: ______________________________________________________
The password encryption key be 12 characters or longer for a new install,
or it can be blank. For an upgrade, the password can be shorter. Required
for a remote portal installation.
|
Web Container
The installer needs the following information if you are installing Access Manager Administration
Console. There are two worksheets for Access Manager, one for each of the
web containers in which you can deploy Access Manager:
Access Manager With Application Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Access Manager With Application Server.
Table 4–3 Access Manager With
Application Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Installation Directory
|
Your data: ________________________________________________________
The default value is:
Solaris OS: /opt/SUNWappserver/appserver
Linux: /opt/sun/appserver
|
|
Secure Administrator Server Port
IS_IAS81_ADMINPORT
|
Your data: ________________________________________________________
The default value is 4849.
|
|
Access Manager runtime instance
|
The default value is server
|
|
Instance Directory
/var/opt/SUNWappserver/domains/domain1
|
|
|
Access Manager Instance Port
|
Your data: ________________________________________________________
The default value is 8080
|
|
Document Root
|
Your data: ________________________________________________________
The default value is:
/var/opt/SUNWappserver/domains/domain1/docroot
|
|
Secure Server Instance Port
|
|
|
Administrator User ID
IS_IAS81_ADMIN
|
Your data: ________________________________________________________
The default value is the administrator user ID you provided under Common
Server Settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Administrator Password
IS_IAS81_ADMINPASSWD
|
Your data: ________________________________________________________
The default value is the Administrator User password you provided under
Common Server settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
Access Manager With Web Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Access Manager With Web Server.
Table 4–4 Access Manager With
Web Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host Name
IS_WS_HOST_NAME
|
Your data: ________________________________________________________
The default value is the fully qualified domain name for the current
host.
|
|
Administrator User ID
IS_WS_ADMIN_ID
|
Your data: ________________________________________________________
The default value is the administrator user ID you provided under Common Settings.
|
|
Administrator Password
IS_WS_ADMIN_PASSWORD
|
Your data: ________________________________________________________
The default value is the administrator user ID you provided under Common Settings.
|
|
Document Root Directory
IS_WS_DOC_DIR
|
Your data: ________________________________________________________
The default value is:
Solaris OS: /var/opt/SUNWwbsvr7/https:-hostname.domain/docs
Linux : /var/opt/sun/webserver7/https:-hostname.domain/docs
|
|
Web Server Port
IS_WS_INSTANCE_PORT
|
Your data: ________________________________________________________
The default value is 80.
|
|
Web Server Instance Directory
IS_WS_INSTANCE_DIR
|
Your data: ________________________________________________________
The path must have the following syntax:
WebServer-base/https-webserver-instancename
If you are installing Web Server in this session, the default value
for WebServer-base is the Web Server installation
directory:
Solaris OS: /var/opt/SUNWwbsvr7
Linux : /var/opt/sun/webserver7
|
|
Web Server Protocol
IS_WS_PROTOCOL
|
Your data: ________________________________________________________
The default value is HTTP.
|
Access Manager Services
You can install Access Manager in various ways:
Specifying Information for Access Manager Console
Table 4–5 Access
Manager Services Information for Access Manager Console Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host Name
IS_SERVER_HOST
|
Your data: ________________________________________________________
|
|
Services Deployment URI
SERVER_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is amserver.
Note: Do not enter a leading slash.
|
|
Common Domain Deployment URI
CDS_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is amcommon.
Note: Do not enter a leading slash.
|
|
Cookie Domain
COOKIE_DOMAIN_LIST
|
Your data: ________________________________________________________
For example: .example.com
Note: Leading period (.) is required.
|
|
Password Deployment URI
PASSWORD_SERVICE_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is ampassword. Do not enter a leading
slash.
|
|
Console Protocol
CONSOLE_PROTOCOL
|
Your data: ________________________________________________________
The default value is HTTP
|
Specifying Information for Access Manager Console
Table 4–6 Access Manager Directory
Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Administration Console
USE_DSAME_SERVICES_WEB_CONTAINER
CONSOLE_REMOTE
|
Your data: ________________________________________________________
The default value is true (deploy new console).
|
|
Console Deployment URI
CONSOLE_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is amconsole.
|
|
Console Host Name
CONSOLE_HOST
|
Your data: ________________________________________________________
The default value is based on the fully qualified domain name for this
host. For example, mycomputer.example.com.
|
|
Console Port
CONSOLE_PORT
|
Your data: ________________________________________________________
The default value is 8080.
|
Access Manager Installing Console (Core Already
Installed)
For detailed explanations of the fields in this worksheet, refer to
the tables under Installing Access Manager Console (Core Already Installed).
Table 4–7 Access Manager Installing
Console (Core Already Installed) Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Console Deployment URI
CONSOLE_DEPLOY_URI
|
Your data: ________________________________________________________
Only relevant for Legacy mode (6.x). The default value is: amconsole.
Note: Do not enter a leading slash.
|
|
Password Services Deployment URI
PASSWORD_SERVICE_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is: ampassword.
Note: Do not enter a leading slash.
|
Installing Access Manager Console (Core Not Already
Installed)
For detailed explanations of the fields in this worksheet, refer to
the tables under Installing Access Manager Console (Core Not Already Installed).
Table 4–8 Installing
Console (Core Not Already Installed) Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Console Deployment URI
CONSOLE_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is amconsole.
|
|
Password Services Deployment URI
PASSWORD_SERVICE_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is ampassword, no leading slash.
|
Installing Federation Management (Core Already Installed)
For detailed explanations of the fields in this worksheet, refer to
the tables under Installing Federation Management (Core Already Installed).
Table 4–9 Installing
Federation Management (Core Already Installed) Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Common Domain Deployment URI
CDS_DEPLOY_URI
|
Your data: ________________________________________________________
The default value is amcommon, no leading slash.
|
Access Manager Directory Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Access Manager Directory Server Information.
Table 4–10 Access Manager Directory
Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Directory Server Host
IS_DS_HOSTNAME
|
Your data: ________________________________________________________
The default value is the fully qualified domain name of the local host.
|
|
Directory Server Port
IS_DS_PORT
|
Your data: ________________________________________________________
The default value is 389.
|
|
Access Manager Directory Root Suffix
IS_ROOT_SUFFIX
|
Your data: ________________________________________________________
The default value is based on the fully qualified domain name for this
host, minus the host name. For example, if this host is siroe.subdomain.example.com , the value is dc=subdomain,dc=example,dc=com.
|
|
Directory Manager DN
IS_DIRMGRDN
|
Your data: ________________________________________________________
The default value is cn=Directory Manager.
|
|
Directory Manager Password
IS_DIRMGRPASSWD
|
Your data: ________________________________________________________
|
Access Manager Provisioned Directory
Existing Provisioned Directory Found
Please refer the following table for the explanation.
Table 4–11 Existing
Provisioned Directory Found
|
Label and State File Parameter
|
Data
|
|
Is Directory Server provisioned with user data?
IS_LOAD_DIT
|
Your data: ________________________________________________________
The default value is No.
|
|
Organization Marker Object Class
IS_ORG_OBJECT_CLASS
|
Your data: ________________________________________________________
The default value is SunISManagedOrganization.
|
|
Organization Naming Attribute
IS_ORG_NAMING_ATTR
|
Your data: ________________________________________________________
The default value is o.
|
|
User Marker Object Class
IS_USER_OBJECT_CLASS
|
Your data: ________________________________________________________
The default value is inetorgperson.
|
|
User Naming Attribute
IS_USER_NAMING_ATTR
|
Your data: ________________________________________________________
The default value is uid.
|
No Existing Provisioned Directory Found
No information is required.
Access Manager SDK Configuration Information
This section contains the following topics:
Access Manager SDK Administration
For detailed explanations of the fields in this worksheet, refer to
the tablesAccess Manager SDK Administration Information.
Table 4–12 Access Manager SDK
Administration Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Administrator User ID
IS_ADMIN_USER_ID
|
Your data: _____________________________________________________
The default name, amadmin, cannot be changed.
|
|
Administrator Password
IS_ADMINPASSWD
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
|
|
LDAP User ID
IS_LDAP_USER
|
Your data: _____________________________________________________
The default user name, amldapuser, cannot be changed.
|
|
LDAP Password
IS_LDAPUSERPASSWD
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
|
|
Password Encryption Key
AM_ENC_PWD
|
Your data: _____________________________________________________
The password encryption key be 12 characters or longer for a new install,
or it can be blank. For an upgrade, the password can be shorter. Required
for a remote portal installation.
|
Access Manager SDK Directory Server
For detailed explanations of the fields in this worksheet, refer to
the tablesAccess Manager SDK Directory Server Information.
Table 4–13 Access Manager SDK
Directory Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Directory Server Host
IS_DS_HOSTNAME
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
|
|
Directory Server Port
IS_DS_PORT
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
|
|
Access Manager Directory Root Suffix
IS_ROOT_SUFFIX
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
The default value is based on the fully qualified domain name for this
host, minus the host name. For example, if this host is siroe.subdomain.example.com , the value is dc=subdomain,dc=example,dc=com.
Use this default value as an example of format only.
|
|
Directory Manager DN
IS_DIRMGRDN
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
The default value is cn=Directory Manager.
|
|
Directory Manager Password
IS_DIRMGRPASSWD
|
Your data: _____________________________________________________
Set this value to the same value used by Access Manager on the remote
host.
|
Access Manager SDK Provisioned Directory
For detailed explanations of the fields in this worksheet, refer to
the tablesAccess Manager SDK Provisioned Directory Information.
Table 4–14 Access Manager SDK
Provisioned Directory Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
User Naming Attribute
IS_USER_NAMING_ATTR
|
Your data: ________________________________________________________
The default value is uid.
|
Existing Provisioned Directory Found
If the installer finds an existing provisioned directory, you provide
the following information.
For detailed explanations of the fields in this worksheet, refer to
the tables Existing Provisioned Directory Found.
Table 4–15 Existing Provisioned
Directory Information for Access Manager SDK
|
Label and State File Parameter
|
Data
|
|
User Naming Attribute
IS_USER_NAMING_ATTR
|
Your data: _____________________________________________________
The default value is uid.
|
No Existing Provisioned Directory Found
For detailed explanations of the fields in this worksheet, refer to
the tables No Existing Provisioned Directory Found.
Table 4–16 No
Existing Provisioned Directory Information for Access Manager SDK
|
Label and State File Parameter
|
Data
|
|
Is Directory Server provisioned with user data?
IS_LOAD_DIT
|
Your data: _____________________________________________________
The default value is No.
|
|
Organization Marker Object Class
IS_ORG_OBJECT_CLASS
|
Your data: _____________________________________________________
The default value is SunISManagedOrganization.
|
|
Organization Naming Attribute
IS_ORG_NAMING_ATTR
|
Your data: _____________________________________________________
The default value is o.
|
|
User Marker Object Class
IS_USER_OBJECT_CLASS
|
Your data: _____________________________________________________
The default value is inetorgperson.
|
|
User Naming Attribute
IS_USER_NAMING_ATTR
|
Your data: _____________________________________________________
The default value is uid.
|
Access Manager SDK Web Container
For detailed explanations of the fields in this worksheet, refer to
the tablesAccess Manager SDK Web Container Information.
Table 4–17 Access Manager SDK
Web Container Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host
IS_WS_HOST_NAME
|
Your data: _____________________________________________________
There is no default value.
|
|
Services Deployment URI
SERVER_DEPLOY_URI
|
Your data: _____________________________________________________
The default value is amserver. Do not enter a leading
slash.
|
|
Cookie Domain
COOKIE_DOMAIN_LIST
|
Your data: _____________________________________________________
The default value is the current domain, prefixed by a dot (.),
such as .example.com.
|
|
Web Container Hostname
IS_SERVER_HOST
|
Your data: _____________________________________________________
|
|
Web Container Port
IS_SERVER_PORT
|
Your data: _____________________________________________________
|
|
Web Container Protocol
IS_SERVER_PROTOCOL
|
Your data: _____________________________________________________
|
|
Services Port
IS_WS_INSTANCE_PORT
IS_IAS81INSTANCE_PORT
|
Your data: _____________________________________________________
Use the port number specified when Access Manager core services were
installed. Web Server is default 80, (Application Server is 8080.
|
Application Server Configuration Information
This section contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to
the tables under Access Manager Configuration Information.
Application Server Administration
For detailed explanations of the fields in this worksheet, refer to
the tables under Application Server Administration Information.
Table 4–18 Application
Server Administration Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Admin User Name
AS_ADMIN_USER_NAME
|
Your data: _____________________________________________________
The default value is the Administrator User ID you provided under Common
Server Settings. Refer to Common Settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Password
AS_PASSWORD
|
Your data: _____________________________________________________
The default value is the Administrator Password you provided under Common
Server Settings. Minimum of 8 characters. Refer to Common Settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Admin Port
AS_ADMIN_PORT
|
Your data: _____________________________________________________
The default value is 4849.
|
|
JMX Port
AS_JMX_PORT
|
Your data: _____________________________________________________
The default value is 8686.
|
|
HTTP Server Port
AS_HTTP_PORT
|
Your data: _____________________________________________________
The default value is 8080. If the installer detects
that the default port is used, an alternative value is suggested.
|
|
HTTPS Port
AS_HTTPS_PORT
|
Your data: _____________________________________________________
The default value is 8181.
|
|
Master Password
AS_MASTER_PASSWORD
|
Your data: _____________________________________________________
The default value is the Administrator Password you provided under Common
Server Settings. Minimum of 8 characters.
|
Application Server Node Agent
For detailed explanations of the fields in this worksheet, refer to
the tables under Application Server Node Agent Information.
Table 4–19 Application
Server Node Agent Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Admin Host Name
ASNA_ADMIN_HOST_NAME
|
Your data: _____________________________________________________
The default value is the name of local host, including domain.
|
|
Admin User Name
ASNA_ADMIN_USER_NAME
|
Your data: _____________________________________________________
The default value is the Administrator User ID you provided under Common
Server Settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Password
ASNA_PASSWORD
|
Your data: _____________________________________________________
Password for the Application Server admin user.
There is no default value.
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Master Password
ASNA_MASTER_PASSWORD
|
Your data: _____________________________________________________
Default value is the admin password you provided under Common Server
Settings.
|
|
Admin Port
ASNA_ADMIN_PORT
|
Your data: _____________________________________________________
The default value is 4849.
|
|
Node Agent Name
ASNA_NODE_AGENT_NAME
|
Your data: _____________________________________________________
Name of the local node.
The default value is the local host name.
|
Application Server Load Balancing Plugin
For detailed explanations of the fields in this worksheet, refer to
the tables under Application Server Load Balancing Plugin Information.
Table 4–20 Application
Server Load Balancing Plugin Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Web server that the load balancing plugin will use
AS_WEB_SERVER_PLUGIN_TYPE
|
Your data: _____________________________________________________
The default value is Sun Java System Web Server.
|
|
Web server installation directory
AS_WEB_SERVER_LOCATION
|
Your data: _____________________________________________________
The default value is:
Solaris OS: /opt/SUNWwbsvr7
Linux : /opt/sun/webserver7
|
|
Web Server instance directory
CMN_WS_INSTANCE_DIR
|
Your data: _____________________________________________________
The default value is:
Solaris OS: /var/opt/SUNWwbsvr7
Linux: /var/opt/sun/webserver7
|
Directory Server Configuration Information
This sections contains worksheets for the following topics:
Directory Server Instance Creation Choice
For detailed explanations of the fields in this worksheet, refer to
the tables under Directory Server Instance Creation Choice Information.
Table 4–21 Directory
Server Instance Creation Choice Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Choose to create a directory instance
CREATE_INSTANCE
|
Your data: _____________________________________________________
The default value is Yes.
If you accept the default, you will be asked to provide the information
required to create an instance.
|
Directory Server Instance Creation
For detailed explanations of the fields in this worksheet, refer to
the tables under Directory Server Instance Creation Information.
Table 4–22 Directory
Server Instance Creation Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Instance Directory
DSEE_INSTANCE_DIRECTORY
|
Your data: _______________________________________________________________
The default value is:
Solaris OS: /var/opt/SUNWdsee/dsinst1
Linux : /var/opt/sun/dsinst1
|
|
Directory Instance Port
DSEE_INSTANCE_PORT
|
Your data: _______________________________________________________________
The default value is 389.
|
|
Directory Instance SSL Port
DSEE_INSTANCE_SSL_PORT
|
Your data: _______________________________________________________________
The default value is 636.
|
|
Directory Manager DN
DSEE_DN_MANAGER
|
Your data: _______________________________________________________________
The default value is cn=Directory Manager.
|
|
System User
DSEE_INSTANCE_USER
|
Your data: _______________________________________________________________
The default value is root.
|
|
System Group
DSEE_INSTANCE_GROUP
|
Your data: _______________________________________________________________
The default value is root.
|
|
Directory Manager Password
DSEE_INSTANCE_PASSWORD
|
Your data: _______________________________________________________________
The default value is the Administrator Password you provided under Common
Server Settings. Minimum of 8 characters. Refer to Common Settings.
|
|
Suffix
DSEE_SUFFIX
|
Your data: _______________________________________________________________
The default value is formed by the segments of the fully qualified domain
name for the current host. For example, if you install on siroe.sub1.example.com, the default value is dc=sub1,dc=example,dc=com.
|
HADB Configuration Information
For detailed explanations of the fields in this worksheet, refer to
the tables under HADB Configuration Information.
Table 4–23 HADB
Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
HADB Management Port
HADB_DEFAULT_ADMINPORT
|
Your data: _______________________________________________________________
For example: 1862
|
|
HADB Resource Directory
HADB_DEFAULT_RESDIR
|
Your data: _______________________________________________________________
For example: /var/opt
|
|
HADB Administrator Group
HADB_DEFAULT_GROUP
|
Your data: _______________________________________________________________
The default value is other.
|
|
HADB Automatic Startup
HADB_AUTO_START
|
Your data: _______________________________________________________________
The default value is Yes.
|
|
HADB Group Management
HADB_ALLOW_GROUPMANAGE
|
Your data: _______________________________________________________________
The default value is No.
|
Portal Server Configuration Information
This section contains worksheets for the following topics:
Portal Server Web Container Choice
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Web Container Choice.
Table 4–24 Portal
Server Web Container Choice Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Web container choice for Portal Server
PS_DEPLOY_TYPE
|
Your data: _______________________________________________________________
The default value is Web Server.
|
Portal Server on Java ES Application Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Java ES Application Server as Web Container.
Table 4–25 Portal
Server on Java ES Application Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Installation Directory
PS_DEPLOY_DIR
|
Your data: _______________________________________________________________
The default value is:
Solaris OS: /opt/SUNWappserver/appserver
Linux : /opt/sun/appserver
|
|
Domain Name
PS_DEPLOY_DOMAIN
|
Your data: _______________________________________________________________
The default value is domain1.
|
|
Server Instance Directory
PS_DEPLOY_INSTANCE_DIR
|
Your data: _______________________________________________________________
The default value is:
Solaris OS: /var/opt/SUNWappserver/domains/domain1
Linux : /var/opt/sun/appserver/domains/domain1
|
|
Server Instance Port
PS_DEPLOY_PORT
|
Your data: _______________________________________________________________
The default value is 8080.
|
|
Document Root Directory
PS_DEPLOY_DOCROOT
|
Your data: _______________________________________________________________
Solaris OS: /var/opt/SUNWappserver/domains/domain1/docroot
Linux : /var/opt/sun/appserver/domains/domain1/docroot
|
|
Administration Port
PS_DEPLOY_ADMIN_PORT
|
Your data: _______________________________________________________________
The default value is 4849.
|
|
Administrator User ID
PS_DEPLOY_ADMIN
|
Your data: _______________________________________________________________
The default value is admin.
|
|
Administrator Password
PS_DEPLOY_ADMIN_PASSWORD
|
Your data: _______________________________________________________________
The default value is from Common Server Settings.
|
|
Secure Server Instance Protocol
PS_DEPLOY_PROTOCOL
|
Your data: _______________________________________________________________
The default value is http.
|
|
Secure Administration Server Protocol
PS_DEPLOY_ADMIN_PROTOCOL
|
Your data: _______________________________________________________________
The default value is http.
|
Portal Server on Java ES Web Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Java ES Web Server as Web Container.
Table 4–26 Portal
Server on Java ES Web Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Installation Directory
PS_DEPLOY_DIR
|
Your data: _______________________________________________________________
The default value is:
Solaris OS: /opt
Linux : /opt
|
|
Instance Directory
PS_INSTANCE_DIR
|
Your data: _______________________________________________________________
The default value is:
Solaris OS: /var/opt/SUNWwbsvr7/https-hostname.domainame
Linux : /var/opt/sun/webserver7/https-hostname.domainame
|
|
Server Instance Port
PS_DEPLOY_PORT
|
Your data: _______________________________________________________________
The default value is 80.
|
|
Administration Host
PS_DEPLOY_ADMIN_HOST
|
Your data: _______________________________________________________________
Fully qualified domain name. For example, mycomputer.example.com.
|
|
Administration Port
PS_DEPLOY_ADMIN_PORT
|
Your data: _______________________________________________________________
The default value is 8989
|
|
Secure Server Admin Protocol
PS_DEPLOY_ADMIN_PROTOCOL
|
Your data: _______________________________________________________________
The default value is selected (https).
|
Portal Server on BEA WebLogic Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server BEA WebLogic as Web Container.
Table 4–27 Portal
Server on BEA WebLogic Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Installation Directory
PS_DEPLOY_PRODUCT_DIR
|
Your data: _______________________________________________________________
The default value is /usr/local/bea/weblogic81.
|
|
Instance Directory
PS_DEPLOY_INSTANCE_DIR
|
Your data: _______________________________________________________________
The default value is /usr/local/bea/user_projects/domains.
|
|
JDK Home Directory
PS_DEPLOY_JDK_DIR
|
Your data: _______________________________________________________________
The default value is /usr/local/bea/jdk142_05.
|
|
Server / Cluster Port
PS_DEPLOY_PORT
|
Your data: _______________________________________________________________
The default value is 7001.
|
|
Server / Cluster Protocol
PS_DEPLOY_PROTOCOL
|
Your data: _______________________________________________________________
The default value is http.
|
|
Administrator User ID
PS_DEPLOY_ADMIN
|
Your data: _______________________________________________________________
The default value is weblogic.
|
|
Administrator Password
PS_DEPLOY_ADMIN_PASSWORD
|
Your data: _______________________________________________________________
|
|
Administrator Host
PS_DEPLOY_ADMIN_HOST
|
Your data: _______________________________________________________________
Fully qualified domain name. For example, mycomputer.example.com.
|
|
Administrator Port
PS_DEPLOY_ADMIN_PORT
|
Your data: _______________________________________________________________
The default value is 7001.
|
|
Administrator Protocol
PS_DEPLOY_ADMIN_PROTOCOL
|
Your data: _______________________________________________________________
The default value is http.
|
|
Managed Server
PS_DEPLOY_NOW
|
Your data: _______________________________________________________________
The default value is n.
|
Portal Server on IBM WebSphere Application Server
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server IBM WebSphere as Web Container.
Table 4–28 Portal
Server on IBM WebSphere Application Server Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Installation Directory
PS_DEPLOY_DIR
|
Your data: _______________________________________________________________
The default value is:/opt/IBM/WebSphere/Express51/AppServer.
|
|
Cell Name
PS_DEPLOY_CELL
|
Your data: _______________________________________________________________
The default value is DefaultNode.
|
|
Node Name
PS_DEPLOY_NODE
|
Your data: _______________________________________________________________
The default value is DefaultNode.
|
|
Server Instance
PS_DEPLOY_INSTANCE
|
Your data: _______________________________________________________________
The default value is server1.
|
|
Server Instance Port
PS_DEPLOY_PORT
|
Your data: _______________________________________________________________
The default value is 9080.
|
|
Server Instance Protocol
PS_DEPLOY_PROTOCOL
|
Your data: _______________________________________________________________
The default value is http.
|
|
Document Root Directory
PS_DEPLOY_DOCROOT
|
Your data: _______________________________________________________________
The default value is /opt/IBM/WebSphere/Express51/AppServer/installedApps\
DefaultNode/DefaultApplication.ear.
|
|
JDK Home Directory
PS_DEPLOY_JDK_DIR
|
Your data: _______________________________________________________________
The default value is /opt/IBM/WebsSphere/Express51/Appserver/java.
|
|
Administrator User ID
PS_DEPLOY_ADMIN
|
Your data: _______________________________________________________________
The default value is weblogic.
|
|
Administrator Password
PS_DEPLOY_ADMIN_PASSWORD
|
Password of the WebSphere administrator (system user).
|
|
Administrator Host
PS_DEPLOY_ADMIN_HOST
|
Administrator server host name. Fully qualified domain name. For example, mycomputer.example.com.
|
|
Administrator Port
PS_DEPLOY_ADMIN_PORT
|
The default value is 7090.
|
|
Administrator Protocol
PS_DEPLOY_ADMIN_PROTOCOL
|
Specify whether the Administrator Port is a secure port. A secure port
uses the HTTPS protocol. A non-secure port uses HTTP.
The default value is http.
|
Portal Server on Web Container
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Web Container Deployment Information.
Table 4–29 Portal
Server on Web Container Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Portal Access
PS_PORTALACCESS_URL
|
Your data: _______________________________________________________________
|
|
Portal ID
PS_PORTAL_ID
|
Your data: _______________________________________________________________
The default value is portal1.
|
|
Search ID
PS_SEARCH_ID
|
Your data: _______________________________________________________________
The default value is search1.
|
|
Deployment URI
PS_DEPLOY_URI
|
Your data: _______________________________________________________________
The default value is /portal.
|
|
Portal Instance ID
PS_INSTANCE_ID
|
Your data: _______________________________________________________________
|
|
Enable Secure Remote Access
SRA_SWITCH_CORE
|
Your data: _______________________________________________________________
The default value is Disabled.
|
|
Developer Sample
PS_DEVELOPER_PORTAL
|
Your data: _______________________________________________________________
The default value is selected.
|
|
Enterprise Sample
PS_ENTERPRISE_PORTAL
|
Your data: _______________________________________________________________
The default value is selected.
|
|
Community Sample
PS_COMMUNITY_PORTAL
|
Your data: _______________________________________________________________
The default value is selected.
|
Portal Server Secure Remote Access Configuration
Information
This section contains worksheets for the following topics:
Portal Server Secure Remote Access Gateway Access
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Secure Remote Access Gateway Access.
Table 4–30 Portal
Server Secure Remote Access Gateway Access Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host Name
SRA_SERVER_HOST
|
Your data: _______________________________________________________________
The default value is the name of the local host.
|
|
Subdomain
SRA_SERVER_DOMAIN
|
Your data: _______________________________________________________________
The default value is the domain name of the host.
|
|
Domain
SRA_GATEWAY_DOMAIN
|
Your data: _______________________________________________________________
The default value is the default domain of the host.
|
|
Access Port
SRA_GATEWAY_PORT
|
Your data: _______________________________________________________________
The default value is 443.
|
|
Gateway Profile Name
SRA_GATEWAY_PROFILE
|
Your data: _______________________________________________________________
The default value is default.
|
|
Log User Password
SRA_LOG_USER_PASSWORD
|
Your data: _______________________________________________________________
|
Portal Server Secure Remote Access Gateway Configuration
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Secure Remote Access Gateway Configuration.
Table 4–31 Portal
Server Secure Remote Access Gateway Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Protocol
SRA_GW_PROTOCOL
|
Your data: _______________________________________________________________
The default value is https.
|
|
Host Name
SRA_GW_HOSTNAME
|
Your data: _______________________________________________________________
The default value is the name of the local host.
|
|
Subdomain
SRA_GW_SUBDOMAIN
|
Your data: _______________________________________________________________
There is no default value.
|
|
Domain
SRA_GW_DOMAIN
|
Your data: _______________________________________________________________
The default value is the domain of the local host.
|
|
Host IP Address
SRA_GW_IPADDRESS
|
Your data: _______________________________________________________________
The default value is IP address of the local host.
|
|
Access Port
SRA_GW_PORT
|
Your data: _______________________________________________________________
The default value is 443.
|
|
Gateway Profile Name
SRA_GW_PROFILE
|
Your data: _______________________________________________________________
The default value is default.
|
Portal Server Secure Remote Access Netlet Proxy
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Secure Remote Access Netlet Proxy Configuration.
Table 4–32 Portal Server Secure
Remote Access Netlet Proxy Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host Name
SRA_NLP_HOSTNAME
|
Your data: _____________________________________________________
The default value is the name of the local host.
|
|
Subdomain
SRA_NLP_SUBDOMAIN
|
Your data: _____________________________________________________
There is no default value.
|
|
Domain
SRA_NLP_DOMAIN
|
Your data: _____________________________________________________
The default value is the domain of the local host.
|
|
Host IP Address
SRA_NLP_IPADDRESS
|
Your data: _____________________________________________________
The default value is the IP address of the local host.
|
|
Access Port
SRA_NLP_PORT
|
Your data: _____________________________________________________
The default value is 10555.
|
|
Gateway Profile Name
SRA_NLP_GATEWAY_PROFILE
|
Your data: _____________________________________________________
The default value is default.
|
Portal Server Secure Remote Access Rewriter Proxy
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Secure Remote Access Rewriter Proxy Configuration.
Table 4–33 Portal
Server Secure Remote Access Rewriter Proxy Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Host Name
SRA_RWP_HOSTNAME
|
Your data: _______________________________________________________________
The default value is the name of the local host.
|
|
Subdomain
SRA_RWP_SUBDOMAIN
|
Your data: _______________________________________________________________
There is no default value.
|
|
Domain
SRA_RWP_DOMAIN
|
Your data: _______________________________________________________________
The default value is the domain name of the local host.
|
|
Host IP Address
SRA_RWP_IPADDRESS
|
Your data: _______________________________________________________________
The default value is the IP address of the local host.
|
|
Access Port
SRA_RWP_PORT
|
Your data: _______________________________________________________________
The default value is 10443.
|
|
Gateway Profile Name
SRA_RWP_GATEWAY_PROFILE
|
Your data: _______________________________________________________________
The default value is default.
|
Portal Server Secure Remote Access Certificate
For detailed explanations of the fields in this worksheet, refer to
the tables under Portal Server Secure Remote Access Certificate Information.
Table 4–34 Portal
Server Secure Remote Access Certificate Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Organization
SRA_CERT_ORGANIZATION
|
Your data: _______________________________________________________________
|
|
Division
SRA_CERT_DIVISION
|
Your data: _______________________________________________________________
|
|
City/Locality
SRA_CERT_CITY
|
Your data: _______________________________________________________________
|
|
State/Province
SRA_CERT_STATE
|
Your data: _______________________________________________________________
|
|
Country Code
SRA_CERT_COUNTRY
|
Your data: _______________________________________________________________
Two-letter country code.
|
|
Certificate Database Password
SRA_CERT_PASSWORD
|
Your data: _______________________________________________________________
Password (and confirmation) that applies only to self-signed certificates.
|
Web Proxy Server Configuration Information
For detailed explanations of the fields in this worksheet, refer to
the tables under Web Proxy Server Configuration Information.
Table 4–35 Web
Proxy Server Administration Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Administrator User ID
WPS_ADMIN_USER
|
Your data: _______________________________________________________________
For example: admin (default from Common Server Settings)
|
|
Administrator Password
WPS_ADMIN_PASSWORD
|
Your data: _______________________________________________________________
Default from Common Server Settings.
|
|
Proxy Server Domain Name
WPS_PROXY_DOMAIN
|
Your data: _______________________________________________________________
|
|
Administration Port
WPS_ADMIN_PORT
|
Your data: _______________________________________________________________
The default value is: 8888.
|
|
Administration Server Runtime User ID
WPS_ADMIN_RUNTIME_USER
|
Your data: _______________________________________________________________
The default value is: root.
|
|
Instance Runtime UNIX User ID
WPS_INSTANCE_RUNTIME_USER
|
Your data: _______________________________________________________________
The default value is: nobody
|
|
Proxy Instance Port
WPS_INSTANCE_PORT
|
Your data: _______________________________________________________________
The default value is: 8080.
|
|
Instance Auto Start Value
WPS_INSTANCE_AUTO_START
|
Your data: _______________________________________________________________
The default value is N.
|
Web Server Configuration Information
This section contains worksheets for the following topics:
Web Server Configuration Type
For detailed explanations of the fields in this worksheet, refer to
the tables under, Web Server Choice of Configuration Type .
Table 4–36 Web
Server Configuration Type Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Configure Admin Instance as Server
WS_ADMIN_IS_SERVER_MODE
|
Your data: _______________________________________________________________
The default value is selected.
|
|
Configure Admin Instance as Node
WS_ADMIN_IS_NODE_MODE
|
Your data: _______________________________________________________________
The default value is unselected.
|
|
Automatically start server when system starts
WS_START_ON_BOOT
|
Your data: _______________________________________________________________
The default value is F.
|
Web Server Administration Server Settings
For detailed explanations of the fields in this worksheet, refer to
the tables under Web Server Administration Server Settings.
Table 4–37 Web
Server Administration Server Settings Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Server Host
WS_ADMIN_HOST
|
Your data: _______________________________________________________________
The value has the format hostname.domainname.
|
|
SSL Port
WS_ADMIN_SSL_PORT
|
Your data: _______________________________________________________________
The default value is 8989.
|
|
HTTP Port
WS_ADMIN_HTTP_PORT
|
Your data: _______________________________________________________________
The default value is 8800.
|
|
Runtime User ID
WS_ADMIN_SERVER_USER
|
Your data: _______________________________________________________________
The default value is root or the value you provided under Common Server
Settings.
|
|
Administrator User ID
WS_ADMIN_LOGIN_USER
|
Your data: _______________________________________________________________
The default value is admin or the value you provided under Common Server
Settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
|
Administrator Password
WS_ADMIN_LOGIN_PASSWORD
|
Your data: _______________________________________________________________
The default value is the value you provided under Common Server Settings.
Note: If you chose to use a single administrator account, this field
is not present.
|
Web Server Administration Node Settings
For detailed explanations of the fields in this worksheet, refer to
the tables under Web Server Administration Node Settings.
Table 4–38 Web
Server Administration Node Settings Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Node Host
WS_NODE_HOST
|
Your data: _______________________________________________________________
Fully qualified name of host. For example, mycomputer.example.com.
|
|
SSL Port
WS_NODE_SSL_PORT
|
Your data: _______________________________________________________________
The default value is 8989.
|
|
Runtime User ID
WS_INSTANCE_USER
|
Your data: _______________________________________________________________
The default value is root.
|
|
Register Node with Remote Administration Server
WS_REGISTER_NODE
|
Your data: _______________________________________________________________
The default value is selected.
|
|
Remote Server Host
WS_ADMIN_HOST
|
Your data: _______________________________________________________________
Fully qualified domain name of the remote host on which the Administration
Server is installed.
|
|
Remote Server SSL Port
WS_ADMIN_SSL_PORT
|
Your data: _______________________________________________________________
The default value is 8989.
|
|
Remote Server User Name
WS_ADMIN_LOGIN_USER
|
Your data: _______________________________________________________________
Administrator user name used to log in to the remote Administration
Server.
|
|
Remote Server Password
WS_ADMIN_LOGIN_PASSWORD
|
Your data: _______________________________________________________________
Password used to log in to the remote Administration Server.
|
Web Server Instance Settings
For detailed explanations of the fields in this worksheet, refer to
the tables under Web Server Instance Settings.
Table 4–39 Web
Server Instance Settings Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
Server Name
WS_SERVER_NAME
|
Your data: _______________________________________________________________
The default value is: <hostname.domainname>
|
|
HTTP Port
WS_HTTP_PORT
|
Your data: _______________________________________________________________
The default value is: 80.
|
|
Runtime UNIX User ID
WS_SERVER_USER
|
Your data: _______________________________________________________________
The default value is: webservd.
|
|
Document Root Directory
WS_DOCROOT
|
Your data: _______________________________________________________________
The default value is:
Solaris OS: /var/opt/SUNWwbsvr7/https-hostname.domain/docs
Linux : /var/opt/sun/webserver7/https-hostname.domain/docs
|
Parameters Used Only in State Files Configuration
Information
For detailed explanations of the fields in this worksheet, refer to
the tables underParameters Used Only in State Files.
Table 4–40 Parameters
Used in State Files Configuration Worksheet
|
Label and State File Parameter
|
Data
|
|
CCCP_UPGRADE_EXTERNAL_ \
INCOMPATIBLE_JDK
|
Your data: ________________________________________________________
The parameter is case sensitive. The default value is no.
|
|
CONFIG_TYPE
|
Your data: ________________________________________________________
The default value is Custom, called Configure Now.
|
|
DeploymentServer
|
Your data: ________________________________________________________
The default value is AppServer.
|
|
PS_DEPLOY_TYPE
|
Your data: ________________________________________________________
Permitted values are IWS, SUNONE8, WEBLOGIC, WEBSPHERE.
|
|
LOCALE
|
Your data: ________________________________________________________
Permitted value is False.
|
|
LICENSE_TYPE
|
Your data: ________________________________________________________
The permitted values are Evaluation and Deployment, but this field is
not used.
|
|
PSP_EXIT_ON_DEPENDENCY_WARNING
|
Your data: ________________________________________________________
Permitted values is No.
|
|
PSP_LOG_CURRENTLY_INSTALLED
|
Your data: ________________________________________________________
Permitted value is Yes.
|
|
PSP_SELECTED_COMPONENTS
|
Your data: ________________________________________________________
Permitted value ALL.
|
Download this book in PDF (1083 KB)