Solaris SPARC 

5.0_09  

6 

Yes 

No 

Yes 

Solaris x86/AMD,AMD64 

5.0_09 

6 

Yes 

No 

Yes 

Linux 

5.0_12 

6 

No 

No 

Yes 

Windows 

5.0_09 

6 

Yes 

No 

No 

HP-UX 

5.0_03 

No 

No 

Sun 

UltraSPARC 

Solaris 8, 9, 10 

256 MB 

550 MB 

Sun 

AMD/x86 

Solaris 9, 10 (x86) 

Solaris 10 (AMD64) 

256 MB 

550 MB 

Microsoft 

AMD/x86 

Windows 2000 Advanced Server, Service Pack 4 

Windows XP Professional Edition, 

Windows 2003 Server, Enterprise Edition 

256 MB 

550 MB 

Linux 

AMD/x86 

Red Hat Enterprise Linux AS 3.0 (Update 4 or later), 4.0 (or later updates) 

Red Hat Enterprise Linux 4 64-bit 

Red Hat Enterprise Linux 5 64-bit 

Red Hat Enterprise Linux 5 32-bit 

SuSE Enterprise Linux 10.2 64-bit 

768 MB 

550 MB 

Novell 

AMD/x86 

SUSE Linux Enterprise Server 9 (or later updates) 

256 MB 

550 MB 

Hewlett-Packard 

PA-RISC 2.0 

HP-UX 11iv1 (B.11.11) 

256 MB 

550 MB 

            Solaris 10 6/06 s10x_u2wos_08 X86
   Copyright 2006 Sun Microsystems, Inc.  All Rights Reserved. 
             Use is subject to license terms.
                   Assembled 02 May 2006

system      SUNWlxml The XML library

Solaris 8 SPARC 

109147-37 (linker patch) 

109147-38 (linker patch) 

109147-39 (linker patch) 

109147–40 (linker patch) 

Solaris 9 SPARC 

112963-22 (linker patch) 

112963-23 (linker patch) 

112963-24 (linker patch) 

112963-25 (linker patch) 

Solaris 9 x86 

113986-18 (linker patch) 

113986-19 (linker patch) 

113986-20 (linker patch) 

113986-21 (linker patch) 

Download and use the appropriate operating system patches. You can download the Solaris patches from http://sunsolve.sun.com/search/document.do?assetkey=1-26-102775-1. For other platforms, download similar DST compatible patches from operating system vendor's web site.

Upgrade the JRE to make sure that Administration Server and Java Web Applications are not impacted by this change. Download and use the appropriate JRE that has the fix for DST changes. JRE versions for the supported platforms are as follows: 

Problem ID

Description

6467621 

Request to the server fails with using of "Sun Software PKCS#11 softtoken".

6472223 

Values of 'mail-resource' sub elements are not getting set on mail session object.

6487083 

NSAPIRequest.setupRequestFields is slow.

com.sun.webserver.connector.nsapi.NSAPIRequest.setupRequestFields is slow primarily because of excessive String-->byte and byte-->String conversion when parsing Cookie headers.

6493271 

Java garbage collector activity is higher in Web Server 7.0 when compared against Web Server 6.1.

The servlet container in Web Server 7.0 creates many Java objects. 

6497803 

If a servlet is mapped to req URI formed by partial req + welcome file, the behavior is wrong.

If a web container receives a valid partial request, the web container must examine the welcome file list defined in the deployment descriptor. The welcome file list is an ordered list of partial URLs with no trailing or leading /. The Web Server must append each welcome file in the order specified in the deployment descriptor to the partial request and check whether a static resource or a servlet in the WAR file is mapped to that request URI. The web container must send the request to the first resource in the WAR that matches.

6316881 

Multi-byte characters in headers can not be retrieved by req.getHeader().

The characters are not parsed correctly, when request.getHeader() is called.

6554326 

The hardcoded message "ADMIN3594: Configuration changes require a server restart" is not localized.

6565615 

In the Japanese locale online help, the description about the PAM for "Editing Authentication Databases" incorrectly states the name of Directory Server.  

The description must be read as: "Editing Authentication Databases" PAM -- PAM is the new auth-db supported by Sun Java System Web Server 7.0.  

6563951 

Search collection subdirectory with leading slash causes confusing error. 

When you try to create a search collection and set the document root subdirectory with a leading slash, the error message produced wrongly informs you that a slash at the beginning is needed. 

6571208 

Inconsistent wording found in Directory listing type. 

The sentence "Error response file to use when indexing is None" should be changed to "Error response file to use when listing is None". 

6549584 

The word "Other" in the list of countries is not translated. 

6556225 

In the Add Documents window, Included checkbox for subdirectory is not translated.  

6565615 

Japanese language help: “Editing Authentication Databases” have different description about PAM. 

6628918 

Translation issue of Admin GUI messages in Japanese. 

6628917 

Translation issue of GUI installer OLH. 

6604075 

In Java ES, Web Server 7.0 with Access Manager displays a null pointer exception. 

6390112 

Java LDAP connection pool interaction issue - initial connection is never timed out.

Specifying a Java LDAP connection pool through the JVM options in the server.xml file and referencing this with an external JNDI resource when the web server is started, creates a pooled LDAP connection. With this connection, it is always marked as busy and the connection never expires.

6472223 

Values of 'mail-resource' sub elements are not getting set on mail session object.

6487083 

NSAPIRequest.setupRequestFields is slow.

com.sun.webserver.connector.nsapi.NSAPIRequest.setupRequestFields is slow primarily because of excessive String-->byte and byte-->String conversion when parsing Cookie headers.

6501785 

The servlet container does not use accelerator cache when processing RequestDispatcher includes.

6500647 

On Windows, dynamic reloading of JSP produces incorrect output.

6433752 

ssl-check is not working with NSAPI based plug-in.

"PathCheck fn="ssl-check" secret-keysize=128 bong file="xxxxx.yyy.html" 

For static file requests, if the secret-keysize of the client is less than the size specified by the server and a bong file is present, then the bong file is sent back as the response. However, requests for dynamic content (for example, JSP files) return the actual requested object (for example, the JSP file) rather than the bong file.

6421617 

Problem having server-parsed HTML (ParseHTML) and .htaccess with restricted group option.

Authentication succeeds when parsing through a HTML file which has the shtml include entries and is configured to authenticate through .htaccess which has the "restricted by group" option enabled. If the group user gets authenticated, then the result page does not get shtml include entries. This however works fine with the user in .htaccess file has "restricted by user" option.

6489913 

SSL session cache cannot be disabled.

Session cache is enabled by default. When the session cache is disabled and URL is accessed through the HTTPs protocol, the URL does not go through and the server log displays an error message indicating that the SSL cannot be configured without session-cache.

6302983 

Samples refer to "Sun ONE" instead of "Sun Java System".

The servlet sample, LocaleCharsetServlet.java, co-packaged with Web Server 7.0 refers to “SunONE” instead of “Sun Java System”.

6495588 

sampleapps/java/webapps/simple docs invalid.

The documents for a simple sample application shows an incorrect pathname. The path should be install_dir/plugins/java/samples/webapps/simple/src instead of install_dir/samples/java/webapps/simple/src.

6347905 

No CLI support to configure FastCGI. Need to manually edit obj.conf or magnus.conf files to configure FastCGI.

6504587 

Memory leak found in FastCGI.

6479045 

Admin Console online help needs to be updated.

The online help needs to be updated for the following:  

1. Context-based help should be provided.

2. All screens must have a corresponding help page.

3. Help pages must reflect the changes in the GUI.

4. Inconsistent usage of terminology between the GUI and online help.

5. Fix grammatical errors.

6. Detailed description for some topics.

6482764 

Mismatch between online help and the Admin Console.

6498477 

Missing help file under config tokens page.

Common Tasks > Edit Configuration > Certificates > PKCS11 Tokens, the help file for this screen is missing. 

6479062 

Cannot dynamically reconfigure HTTP listener family. The Instance does not start on setting the protocol family to nca.

6482536 

<listen-queue-size> upper bound is set to 65535, which is too small. Need to increase the <listen-queue-size> upper bound.

6500715 

Incorrect ObjectType fn="force_type" added in object cgi on creation of new cgi directory.

When creating a new cgi directory, an incorrect object type force_type is added to the obj.conf file.

6479247 

On Windows, dialog box to enter the token password appears on restarting an instance after the deployment. This behavior is not see on other platforms.

6425144 

On Windows, wadm does not update classpath correctly if classpath contains a semicolon (;)

The semicolon in tcl is interpreted as a command terminator, which is used to group multiple commands in a single line. On Windows, semicolon is used as a path separator.

6292582 

SNMP Management Information Base (MIB) for "iwsFractionSysMemUsage" does not show correct results

SNMP MIB "Fraction of process memory in system memory" which is part of iws.mib gives wrong results when queried by the SNMP manager utility.

6471744 

Incorrect error message is displayed if you execute the list-tokens command without specifying the configuration value.

6471754 

Incorrect error message is displayed if you execute the list-authdb-userprops command without specifying the authdb value.

6472210 

No error message is displayed if you execute the get-ssl-prop command with an invalid http-listener value.

6476111 

Cannot edit the MIME types using the Admin Console.

6478601 

Displays an improper message when you stop an instance that does not exist.

An error message `Successfully stopped the server instance' is displayed if you try to stop an instance that does not exist. 

6480523 

wadm allows you to create a configuration with a negative port number.

6489765 

Incorrect error message is displayed if you execute the create-cert-request command with an invalid key-size value.

6489777 

The delete-group command displays an incorrect error message if you specify an invalid group value.

6489779 

No error message is displayed when you execute the list-group-members command with an invalid group-ID value.

6490728 

Cannot set the rewrite-location properties using the set-reverse-proxy-prop command.

You cannot set the -rewrite-location property to false. The value specified for the -rewrite-location is not validated. For example, specifying the = symbol for the i-rewrite-location option corrupts the obj.conf file and results in parser error.

6492315 

The set-token-prop command sets wrong passwords in the server.xml file even if the token pin has not been specified.

6492469 

Incorrect error message is displayed on LDAP user creation failure.

6494353 

If an invalid node name is specified while deleting an instance, an incorrect error message is displayed.

6494950 

The register-node command runs successfully with non SSL port only in shell mode.

In shell mode, typing the register-node command with the -no-ssloption registers the node successfully as the command is falsely executed in the SSL mode.

6405018 

The get-jvm-prop command does not print the command when echo is enabled in shell mode.

6499507 

Incorrect error messages are displayed when you execute the list-locks and expire-lock commands.

6499510 

A 'null' message is displayed if you execute the list-instances, list-crls, list-tokens, and list-certs commands without specifying the configuration name.

6499512 

The error message for the list-url-redirects command is not localized.

6500119 

wadm prompts for a token pin if you specify an invalid configuration name while trying to delete an existing certificate.

6500146 

While creating an HTTP listener using the CLI, the create-http-listener command creates a listener with null value as name.

6500150 

If you do not specify a virtual server while executing the list-dav-collections command, an incorrect error message is displayed.

6500151 

If you do not specify the authentication database while executing the list-users, list-org-units, list-groups, and list-group-members commands, an incorrect error message is displayed.

6500152 

If you do not specify a virtual server while executing the list-uri-patterns command, an incorrect error message is displayed.

6500154 

If you do not specify a JNDI name or specify an invalid JNDI name while executing the list-jdbc-resource-userprops, list-soap-auth-provider-userprops, list-auth-realm-userprops, list-external-jndi-resource-userprops, list-custom-resource-userprops commands, an incorrect error message is displayed.

6503350 

Error message given when entering invalid wadm command is misleading.

When you type an invalid command, an error message “Invalid command <command name>. Use "help" command for a list of valid commands.” is displayed. The help man page does not contain a list of valid command. Therefore this error message is misleading. 

6503944 

The create-user command usage for the LDAP authentication database is ambiguous.

6504095 

The set-cert-trust-prop command accepts incorrect properties and does not show proper error message.

6443845 

Administration Server does not validate the password length and mechanism support of the given token.

6449506 

Certificate with same server name as existing certificate cannot be created with the same nickname.

6461553 

Virtual Server Web Applications page title help is incorrect.

6473518 

Prompt to enter token pin while starting instance should not appear if configuration has not been deployed.

6476095 

Admin Console does not provide an option to edit document directories and CGI records.

6476736 

Admin Console should have a tab to add and edit MIME mappings at the Virtual server level.

6478090 

`Current Password' field in the Nodes -> Select Administration Server-> Certificates -> Token Password Management page should be disabled if no token password has been set for the administrator.

6490705 

Unable to configure uri-pattern specific configurations using the Admin Console.

6496545 

Admin Console displays invalid properties when custom authentication database user properties are created through Administration CLI.

6502303 

The Admin Console Migrate wizard creates multiple configurations if you click the Finish button multiple times.

6504495 

Admin Console has 508 compliance issues.

6504951 

User selection process in the Common Tasks->Edit Virtual Server->WebDAV->New page needs validation.

6360666 

Installed CRL should have a meaningful name.

6364821 

Administration CLI should support URIs, URI prefixes, URI wildcard patterns, and URI regular expressions for all commands that operate on URI space.

6366956 

Search schedule events do not work from the Admin Console.

6378612 

64–bit instance does not start on 32–bit remote node.

6423391 

When a server certificate with data in non-DER format is installed, an incorrect error message is displayed.

6439132 

Exceptions in Certificate Installation wizard not clear.

6468676 

No validation exists for 'Java Home' field; accepts invalid data.

6474668 

HTTP Listener field accepts names with spaces. This is invalid.

6476111 

Unable to edit MIME types either using the Admin Console or the CLI.

6483365 

GUI and CLI accept Web Server 7.0's server root for migration

The Admin Console and the CLI accept the Web Server 7.0 path instead of Web Server 6.1 or Web Server 6.0 path during migration. Web Server 7.0 path is not a valid path for the server-root property in the migrate-server command.

6492176 

Default and null values get stored in obj.conf when a new configuration is created and saved using the Admin Console.

Administration Server stores the values passed by the Admin Console into obj.conf file without any validation.

6497004 

SaveConfigException displayed on CLI during set-authdb-prop.

If a nonexistent file path is provided to the path property for keyfile authdb by using the set-authdb-prop command, results in SaveConfigException instead of a File does not exist message.

See the error log for the Administration Server. 

6497143 

At times, the execution of stop-admin command displays the "Admin Server Not Running" message when the Administration Server is actually running.

6498411 

The get-cert-prop does not display only those properties mentioned in the <displayproperties> element.

6500715 

Server error on trying to access a file in the cgi-bin directory.

6364702 

wadm commands do not return valid error codes [0-125] when success or failure.

6370032 

Session failover does not happen with RequestDispatcher include call.

While deploying two web applications on a cluster where the first application calls on the second application using the RequestDispatcher() include call, the persistence valves are not called during the RequestDispatcher()'s invoke() method, and session replication does not occur.

6381950 

Incorrect load factor set for BaseCache.

Session replication does not support more than two web applications. 

6381954 

Session replication fails to work on multiple web applications involving RequestDispatcher due to bad sequence.

6383313 

Incorrect path is set on SR-intanceId cookie.

The SR-instanceId cookie should be set to the web application's path instead of the servlet's path.

6450360 

The create-authdb command does not validate the URL at the time of the authentication database (authdb) creation. The create-authdb command successfully creates an authentication database with the wrong URL.

6450800 

The get-error-log and the get-access-log commands displays cluttered and improper messages.

6459106 

The wadm deploy fails to deploy the cluster configuration.

If any changes occur to the instance configuration files, manually or otherwise, the deploy-config command displays an error message stating that the instance has been modified.

6462891 

No Admin Console is available to deploy web applications in user specific location.

6439577 

Does not prompt for the token password when the instance is started from the wadm command prompt with a wrong token-pin.

6465470 

Incorrect text in Groups settings page.

The text should read as “From this page you can add/remove user groups in the selected Authentication Database” instead of “From this page you add/remove user groups in the selected Authentication Database.” 

6465480 

Incorrect message when you delete a JVM profiler.

The message should read as “Profiler deleted successfully” instead of “Profiler saved successfully”. 

6466409 

Incorrect error message is displayed when you provide a wrong path while adding web application.

6467164 

The window titles of the Admin Console wizards are not consistent.

6467785 

Admin Console gives incorrect error message when you provide invalid Directory Server configuration values.

6470585 

URI prefix of document directories is accepts the value without '\'.

6471737 

The list-instances command lists the instances even if you do not specify the configuration value.

6472385 

Token password changes made through the CLI is not reflected in GUI. It requires a browser refresh.

6467665 

Migrating certificate with an invalid file path using the migrate-jks-keycert command, prompts the user to enter the keystore-password and the key-password.

6469104 

The create-selfsigned-cert command allows you to define an inappropriate validity period while creating a server certificate.

6469109 

The delete-cert command does not delete a certificate which is created with token "Sun Software PKCS#11 softtoken".

6471649 

The list-events command output is not aligned.

6474584 

dayofweek does not take "*" as an option.

For example, set an ACL as follows:  

acl "uri=/"; 
deny (all) dayofweek="*"; 
allow (all) dayofweek="Sat,Sun";

In this program, you are restricting access on all days of week except Saturday and Sunday. This program does not work as you can you can successfully access the ACL on a Monday. 

6477840 

Admin Console should provide large text region for entering class path prefix, class path suffix, and native library path prefix.

6478165 

Usability issues in the Install CRL page after incorrect file path is entered for CRL file on server.

6478229 

The Instance->New page has incorrect title.

6478292 

The Common Tasks->Select configuration ->Select Virtual Server ->Edit Virtual Server ->WebDAV->New page should have the Enter Users field only if the authentication database is PAM.

6478303 

Admin Console allows you to create an ACE without entering user or group information for ACL. The check is not done if the authentication database is PAM.

6478612 

Inline help for range of values accepted by Request Header Time-out text field is incorrect.

6500228 

The Admin Console displays an exception when you create a duplicate record of a MIME types.

6501807 

Deploying a new web application using the Admin console kills sessions for all existing web applications.

6504748 

With delete instance option, instead of deleting the symbolic links, the uninstaller deletes files from symbolic links.

6505994 

Crash detected when creating properties with empty URI pattern

6510486 

htaccess rules can become corrupted in memory.

If a single .htaccess file has more than five allow or deny rules, it is possible that some of the rules may become corrupted in memory. If this occurs, some of the rules may be bypassed.

6506936 

deploy-config fails when you modify JSPs or any other files in the webapps directory of the instance.

When using the pull-config either through the Admin Console or through the CLI, only the contents of the instance_dir/config directory is pulled into the config-store. In Web Server 7.0, when pull-config was used, the contents were pulled into instance_dir/config, instance_dir/lib, and instance_dir/web-app directories.

6492407 

Front-end file accelerator cache.

Depending on ACLs and obj.conf configuration, a front end accelerator cache can service static file requests for URIs that were previously processed using NSAPI. The accelerator cache must work with the default configuration.

6498928 

Output directives are not invoked for 0-byte files.

Output directives are not invoked for 0-length responses unless protocol_start_response() is called. send-file does not call protocol_start_response() function. Output directives are not invoked when sending 0-byte files.

6502258 

Server crash with large output buffers.

If the output stream buffer size is bigger than the input buffer size, the server might attempt to buffer data at an invalid address. The default input buffer size is 8192 bytes.  

6504755 

Cannot disable access logging in default server instance.

The value of the <access-log> <enabled> element is ignored in the server.xml file.

6505390 

Accelerator cache does not handle ssl-unclean-shutdown properly.

The accelerator cache does not interact correctly with the AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true" directive in the default configuration. When such a directive is present, the accelerator cache applies the "unclean shutdown" setting to every connection, regardless of the browser used.

6432375 

On HP-UX, SNMP fails for some oid values.

Workaround

Due to lack of the HP-UX API support and complexity, network in and out traffic statistics is not implemented. Use HP tools for monitoring the traffic statistics. 

6430293 

The AdminException messages displayed on the Admin Console are not localized.

6508299 

Displays incorrect characters in search results on the left panel of online help on non-English locales.

6507819 

Localized online help content have some differences from the English version.

Issues resolved in Web Server 7.0 Update 2 Release

6479062 

Web Server fails to start when HTTP listener protocol family="nca" is used for Solaris SPARC, Linux and HP-UX platforms.

Web Server instance does not restart on setting the Protocol-Family property to nca in the EditHTTPListener wizard.

6464953 

Setting digestauthstate property through the set-authdb-prop CLI does not validate the value and allows to set junk value for this property.

6504050 

The Results page in all Admin Console wizards should be aligned properly.

6473376 

The default server.xml should not contain the <stack-size> element.

6367751 

The create-instance command fails on remote node intermittently and logs HTTP 400 error.

6547264 

Executing the create-instance command immediately after starting a remote node fails on the remote node.

6468132 

The list-cert command does not list the certificates if the certificate nickname contains a colon.

6437577 

<pkcs11> element not removed from server.xml even when child elements are absent.

6473589 

<pkcs11/> added to _server.xml when token pin is set.

6534202 

Cannot edit WebDAV collection properties through the Admin Console

When a configuration is deployed on multiple nodes, the lockdb path must be a shared location mounted on the same path on all the nodes. Additionally, to list or expire locks in the lockdb from the Admin Console, the same path must be writable from the Administration Server.

6554691 

The add-webapp command when used with JSP pre-compilation option does not delete the previously precompiled JSP files.

6556820 

The Admin Console or the Admin CLI does not provide support to add CA certificates to the Administration Server.

6489269 

'external' expression function with quoted path is not working.

6432375 

On HP-UX, SNMP fails for some oid values.

6483212 

On HP-UX 11.11, Web Server fails to start when max heap size is 2048 MBytes or greater.

6474011 

The basic-search.html has unclear description.

4988156 

Installing the stand-alone product over an existing Java ES installation and vice-versa is not supported.

6610103 

On Windows - unable to deploy configuration and start up after disabled Java

6364924 

A node can be registered to multiple administration servers which may cause a configuration conflict.

It is possible to register a node to a second Administration Server without canceling the registration with the first Administration Server. However, this leads to the nodes becoming inaccessible to both the Administration Servers. 

Workaround:

On each registration, restart the administration node. The administration node will be available to the most recent Administration Server it has registered to. 

6379125 

wadm command allows connecting to a node, shows a certificate and then throws a 'HTTP 400 Error'.

When an administration node receives a connection, the administration node does not check the connection is from the Administration Server before proceeding. It not only prints an inappropriate error message, but also prompts the user to enter the password.  

6387762 

Cannot access shell/system variables from wadm.

Workaround:

wadm does not inherit the shell environment variables. However, to make the shell variables it available to wadm, use

"java::call System getenv env_var_name

For example: 

For accessing the shell environment variable MAIL from within wadm, type the following command at the wadm prompt:

wadm> java::call System getenv "MAIL"
/var/mail/abc

4793938 

User and password dialog presented instead of directory index.

By default, Web Server 7.0 does not send a directory index unless the user has been authenticated. Attempting to access a directory prompts the user to enter a user name and password. This occurs because the default Access Control List (ACL) in Web Server 7.0 grants the list access right only to authenticated users. 

Workaround

You can grant the list access right to unauthenticated users using the Admin Console or by editing the default.acl file. For more information on how to grant list access right, see Configuring Access Control in Sun Java System Web Server 7.0 Update 2 Administrator’s Guide.

6327352 

Session replication enabled instances does not come up normally, if other instances in the cluster are not started.

6393534 

After migrating the Java keystore keycerts using the migrate-jks-keycert command, trying to list the migrated jks keycerts using the list-certs command, displays the CN, org and other information instead of the certificate nickname.

6407486 

While setting the SSL property using the wadm set-ssl-prop command, the server-cert-nickname property accepts any certificate nickname, instead of accepting only the server certificate nickname.

6443742 

The set-session-replication-prop CLI command does not work if the 'node' option is provided with a qualified domain name.

Workaround

Use the output of the list-nodes command for the valid names of the nodes in the set-session-replication-prop command.

6468570 

Specifying "yes" at the wadm prompt crashes the CLI.

6469676 

When you try to connect to the Administration Server after the administration certificates have expired, an incorrect error message is displayed.

6480600 

The register-node command gives an incorrect error message when the Administration server runs out of disk space.

6495446 

If no disk space is available on the device, wadm throws an incorrect error message "Unable to communicate with the administration server".

6502800 

Executing the migrate-server command with both "--all" and "--instance" options does not result in an error.

A warning or an error message should be displayed indicating that the user is attempting the set mutually exclusive options. 

6416328 

The Start Instances. button in the Admin Console is enabled for instance which is already running.

The buttons should be enabled or disabled based on the status of the instance. 

6418312 

wadm allows you to define duplicate user properties.

Adding duplicate user properties does not show an error message; however, a new user property is not created. 

6421740 

There is no provision to create new Access Control List (ACL) file using the Admin Console or the CLI.

6423432 

On Windows, using an existing configuration, repeating the process of adding and removing the registered nodes causes validation failure.

6426116 

Clicking on the Version button in the Admin Console result in “file not found” warning in Administration error logs.

6430417 

MIME Types allows MIME value with multibyte characters.

6442081 

Text in Access Control List page is not formatted.

6442172 

User can be switched between `available' and `selected' lists in ACE even though the user is deleted from the authentication database.

6446162 

No warning is issued before the deletion of key or the digestfile authentication database.

6446206 

When a single user in group is deleted, an incorrect message “Group Saved Successfully" is displayed.

6448421 

Administration Interface allows you to create a new user with multi-byte User ID in the keyfile authentication database.

6455827 

User and Group table in the Admin Console displays the entire result in a single page.

6461101 

Labeling of the Request Certificate and Install buttons in the Admin Console Create Self-Signed Certificate page needs to be revised.

6462057 

Add and Remove buttons are enabled in new ACE window even if no items are present in the `Available' list.

6464891 

Admin Console truncates the display of server logs at 50 lines or 2 pages.

6465382 

No validation exist to check the entry of wrong country code in the certificate request wizard.

6465421 

In the Admin Console, no text field description is provided for virtual-server, authdb, dav collection, and event fields .

6466336 

Admin Console shows wrong JDK version while creating a new configuration.

The JDK version displayed in the Admin Console is 5.0 u6 instead of 5.0 u7. 

6471171 

Style formatting is lost after restarting the Administration Server from Nodes -> Administration Server General tab.

6471367 

Attempting to access the Admin Console in another tab of the same browser does not work.

6471792 

View Log displays result in a single page.

Although the search criteria selected for record size is 25 log entries, the log displays the results in one single page even if there are more than 50 log entries. 

6472932 

Token mismatch error is displayed when you remove the token password and then reset it in the Common tasks -> Select configuration -> Edit configuration -> Certificates -> PKCS11 Tokens page.

6486037 

The Virtual Server Management->Content Handling->Document Directories->Add should have a browse option to choose the path of a additional document directory.

6492906 

Message displayed about WebDAV collection locks in the Admin Console is misleading.

If you specify the time-out value for the WebDAV collection as infinite, the Common Tasks->Select Configuration ->Select Virtual Server->Edit Virtual Sever ->WebDAV->Select collection page displays the message DOES NOT EXPIRE. What it actually means is that the lock does not expire automatically after a specified time or the time-out is infinite.

6498484 

Incorrect error message is displayed on setting empty token password using the `Set passwords' button.

6500157 

Instance fails to restart if you try to edit a token password and deploy a configuration on an instance which is already running.

6502287 

The Admin Console displays an exception when you delete a configuration and click on the Migrate button.

6502374 

The Admin Console Review screen in wizards should only show fields that have values.

6502793 

During migration, the log-dir path permission is not validated.

6266358 

Cannot log in through the Administration CLI if the administration password has extended ASCII characters.

6361329 

The error-response file name should be validated.

6367282 

Administration server starts with expired certificate; wadm should warn about expired certificates.

6375505 

The unregister-node command should also clean up certificates on the administration node.

6408169 

WebDAV lock CLIs do not work in a cluster environment.

6408186 

Multiple installations of the administration nodes on the same node that is registered to the same administration server should be not be allowed.

6416369 

Accessing the administration node URL results in Page Not Found error.

As the administration node does not have a GUI, accessing the administration node URL results in Page Not Found error.

6422936 

No validation for class path prefix and suffix, and native library path in JVM Path Settings in Java.

6423310 

The server.xml elements should be grouped based on functionality.

6431984 

Web Server should store its pid file and UNIX domain sockets in /var/run instead of /tmp.

6441773 

On Windows, Administration Server moves the Web application files physically before stopping the Web application.

6462515 

The Admin Console misleads user with "Instance modified" message when runtime files gets created in the config directory.

6462579 

Trust store does not deleted on uninstalling the administration node after unregistering it with the administration server.

6468330 

Changes made to the JavaHome property does not get saved after restarting the instance.

6475536 

No obvious way to reset the administration server password.

Workaround

1. Comment out the security-constraint in install_dir/lib/webapps/jmxconnectorapp/WEB-INF/web.xml.

2. Restart the Administration Server.

   This action turns off the authentication on the administration server.

3. Set the administration password by using the set-admin-prop command.

6489727 

[JESMF CONFORM] CP when stopping should call MfManagedElementServer_stop().

6491749 

Need better validation in certain text fields to prevent obj.conf file corruption.

Most of the functional validation of the data in a form is done in the back end. The GUI has only minimal checks such as empty fields, integer values, and ASCII values. Hence, the GUI stores the data in the obj.conf when parsed gets corrupted .

6493971 

Admin Server does not time-out if the server instance restart does not respond.

On UNIX systems, the Administration Server waits until the server instance is restarted when the restart-instance command is executed. If the instance is not successfully restarted, the Administration Server does not respond to requests.

6497213 

Executing the restart-admin command followed by the stop-admin command throws exception in administration error logs.

6515745 

SNMP master agent process fails to start on Web Server

Workaround:

Changing the tcp_xmit_hiwat value to a higher value like 262144 , peer SNMP master agent functions properly. Type the following command to change the tcp_xmit_hiwat value.

# ndd -set /dev/tcp tcp_xmit_hiwat 262144

6545779 

On Windows, wdeploy command fails if older version of libnspr4.dll is found in the system32 directory.

Workaround

Before calling Java, edit the wdeploy.bat file that is available in install_dir/bin directory. Change the path of the Java directory to install_dir/lib directory. This modification makes Windows look for libnspr4.dll in the install_dir/lib directory before it looks in system32 directory.

6587832 

On Windows, the Admin Console intermittently fails to come up.

Workaround

1. This problem is seen on Windows 2003 if you have "Internet Explorer Enhanced Security Configuration" enabled.

2. To access the Admin Console without disabling Enhanced Security feature, include the site in the list of trusted sites explicitly on the browser.

3. Go to Control Panel > Add/Remove Programs > Add/Remove Windows Components.

4. Deselect the check box next to Internet Explorer Enhanced Security Configuration.

6606243 

Web Server installer should import the admin self signed certificate into IE certificate tab.

When the Admin console is accessed using a browser, a pop-up (in the case of IE6 and Mozilla/Firefox) or a warning page (IE7) may be displayed stating that the certificate is not issued by a trusted certificate authority. This is because, the administration server uses a self-signed certificate. To proceed to the Administration GUI login page, do the following:  

• On Mozilla/Firefox, click on the OK button in the pop-up window.

• On Internet Explorer 6, click on the Yes button in the pop-up window.

• On Internet Explorer 7, click on the "Continue to this website" link in the page.

The above procedure will accept the certificate temporarily for that browser session. 

To accept the certificate permanently, follow the steps below: 

• On Firefox/Mozilla:

  Select the "Accept this certificate permanently" radio button in the pop-up window and click OK.

• On Internet Explorer 6.0:

  1. Click on the "View Certificate" button in the pop-up window.

     Displays another pop-up window.

  2. Select the "Certification Path" tab, select the admin-ca-cert.

  3. Click on the "View Certificate" button and then on "Install Certificate..." button.

     Invokes the certificate import wizard using which you can import the admin CA certificate into the trusted root certificate database.

• On Internet Explorer 7:

  1. Click on the "Continue to this website" link on the warning page.

     The login page is displayed.

  2. Click on the "Certificate Error" link located next to the address bar.

     A warning window is displayed. Click on the "View certificates" link.

  3. Follow the steps 1 to 3 as described in the section "On Internet Explorer 6" to import the admin CA certificate into the trusted root certificate database.

6606132 

Create self signed certificate fails when the "Sun Metaslot" pin is not set

Workaround

Before creating the self signed certificate, set the "Sun Metaslot" password using the pktool

# pktool setpin

Provide the password. 

Now create the self-signed certification either by using the create-self-signed-cert command or the Admin console.

6296993 

When there is an error executing an obj.conf directive, the filename and line number where the offending directive was found are not logged.

6365160 

When server.xml schema validation fails due to a data type constraint violation, it displays an error message that does not describe the set of valid values for the element.

6378940 

All HTTP header parsing error are not logged with the client IP and a description of the error.

6470552 

set-variable SAF could not set predefined variable.

6486480 

service-nsfc-dump entry hit counts are 0 with <replacement>false</replacement>.

If <replacement>false</replacement> is specified in server.xml file, entry hit counts show as 0 in the service-nsfc-dump output. However, the cache hit counts are displayed correctly.

6489220 

Server treats non-interpolated strings that contain $$ character constants as interpolated.

When a parameter value contains a $$ escape, the server constructs a PblockModel for the parameter block. This is unnecessary because $$ is a constant.

6639402 

Connection queue size set by server for 1024 max file descriptor is very less (128)

Web Server reserves the file descriptors for various components. If connection pool queue size, file cache max open files and keep-alive max connections are not set, then after reserving file descriptors for other components, Web Server divides the available descriptors among three. On systems where default value of max file descriptor is low, for example, Solaris 8 and RHEL, the connection pool size might be set to a low value. For example, on RHEL, the default value of max file descriptors is 1024. If the connection queue size is not assigned, then Web Server assigns 128 connections to connection queue. The value can be very low on busy systems. If connections starts timing out, users should set higher value for max file descriptors. 

6485248 

The fastcgi stub does not properly close all the processes when reuse-connection is set to true.

Configure Web Server 7.0 to work with PHP as a FastCGI plug-in and set reuse-connection=true. When you shutting down the server or reconfiguring the server, the fastcgi() process and its child processes are left behind and not killed properly.

6644322 

Memory leak in Fastcgistub causes hang in the Fastcgi sub-system

6474037 

Exception installing Web Server on Ubuntu.

On Linux Ubuntu, the package which contains the /bin/domainname is not available by default. You must install these packages for the Web Server installation to succeed.

To install the package, type the following command: 

sudo apt-get install nis

6414481 

Web Server cannot be installed without installing compat-libstdc++.

Workaround:

On newer versions of Linux, for example, Red Hat Enterprise Linux 3, install compat-libstdc++ before installing Web Server 7.0.

6641672 

REDHAT ES4.0 Linux 64-bit installaton fails by having compat-libstdc++-33-3* (64-bit)version

Workaround

You must install the following RPMs for successful installation: 

• compat-libstdc++-33-3.2.3-47.3.<arch> 32 & 64 bit rpm's

• libgcc-3.4.3-22.1.<arch> 32 & 64 bit rpm's

• zlib-1.2.1.2-1

6414539 

Uninstalling the administration node does not delete itself from the administration server node.

After installing the administration node and registering it with the administration server in the Node tab, the administration node is listed in the Node tab. When the administration node is uninstalled, the administration node entry remains in the Node tab. 

6287206 

Cannot install if the setup is started from a shared folder on the network.

On the Windows platform, unable to install the product when the installer setup.exe is started from a shared network folder on another machine.

6311607 

On Windows, installer crashes in CLI mode, if the administration password is >= 8 characters.

If the administration user password is greater than eight characters, then any invalid input to the administration port, web server port, or the administration user ID crashes the installer. 

Workaround:

When installing Web Server 7.0 on the Windows platform using the command-line interface (CLI), the administration password must be set to less than (<) eight characters. 

6408072 

On Windows, need icons for objects in Programs folder.

The objects in the Sun Java System Web Server 7.0 folder on Windows are created with default Windows program icons and do not have specific icons that denote Sun programs. 

6492144 

The CLI installer does not handle ctrl+c while entering the password.

The installer does not accept ctrl+c and hence the terminal becomes unusable.

6472668 

On Windows, Web Server installation should use -Xrs JVM option by default.

Workaround:

Because the Web Server installs as a windows service by default, add the following line to the appropriate section of the server.xml:

<JVMOPTIONS>-Xrs</JVMOPTIONS>

6407877 

Incorrect migration occurs while migrating from Web Server 6.0 to 7.0 if the installed.pkg file is not found.

In Web Server 6.0 to 7.0 migration, if the installed.pkg file is missing, Web Server incorrectly migrates the NSServlet entries in the magnus.conf file.

6490124 

6.x -> 7.0: Migrated scheduled events still points to 6.x paths in the server.xml file.

6502529 

6.1->7.0: Migration does not handle relative path set for search-collection-dir correctly.

During instance migration, specifying a relative path for the target path into which the search collections should be copied, results in the search collection directory being created with respect to the config-store. When the instance is instantiated, the indexes are created without properly migrating the search collections.

6502769 

6.x->7.0: Migration ignores any "document-root" NameTrans specified in the obj.conf file.

6498806 

On Windows, Web Server Admin Console does not appropriately warn users during migration.

Administration Server does not detect if the selected new configuration or the service name already exists on Windows and hence does not appropriately warn the users to select a different configuration name or suggest a different configuration name as default. 

6500509 

Web Server 7.0 migration tool is unable to successfully migrate from Web Server 6.1 if it has Root Certs installed in it.

6559918 

Unclear error message if CLI and Administration Server versions are incompatible.

While upgrading Web Server 7.0 installation to Web Server 7.0 Update 2 , make sure that the entire setup CLI, Administration Server and all the Administration Nodes are also upgraded to Web Server 7.0 Update 2. This is because, Web Server 7.0 administration interfaces will not work correctly with Web Server 7.0 Update 2 administration interfaces. 

6595795 

The Admin console does not add the required functions in the obj.conf file for a migrated instance.

When a JVM disabled Web Server 6.0 instance is migrated to Web Server 7.0 and when the migrated instance is enabled with the JVM option using the Admin console, the process does not add the following necessary lines in obj.conf file.

NameTrans fn="ntrans-j2ee" name="j2ee"
PathCheck fn="find-index-j2ee"
ObjectType fn="type-j2ee"
Error fn="error-j2ee"

6641844 

On Windows, server fails to start after upgrading from Web Server 7 that is part of the Java ES 5 release to Web Server 7.0 Update 2 release using the patch.

Workaround

On Windows, to upgrade the Web Server that is part of Java ES 5 or Java ES 5 Update 1 release to Web Server 7.0 Update 2 release, ensure the following security patches are installed on the system. 

• 125923-05 or later

• NSS_NSPR_JSS 3.11.8

• NSPR 4.6.8

• NSS 3.11.8

• JSS 4.2.5

6644314 

Security patch 121656-16 is a mandatory perquisite for Sun Java System Web Server 7.0 Update 2 Linux patch on Java ES 5/U1. However, the security patch exhibits cyclic dependency, hence making it impossible to apply any of the patches. 

Workaround

In order to avoid this scenario, use the --force option. For example: 

rpm -F --force <list of rpms to be applied>

6640206 

On non-windows platforms (Solaris, Linux and HP-UX), if you have installed Web Server 7.0 or 7.0 update 1 without sample applications and if you upgrade to Web Server 7.0 update 2, you will see the following error message:  

A problem occurred during upgrade. To troubleshoot the problem, review the installation log at: <install-dir>/setup/Sun_Java_System_Web_Server_install.log

This error does not impact the upgrade.

6472796 

sendmail.jsp shows incorrect file to be edited to specify resource.host for javamail sample application.

Workaround

To set javamail.resource.host, edit the javamail.build.properties and not the build.xml as specified in install_dir/samples/java/webapps/javamail/src/docroot/sendmail.jsp.

6559735 

Sample applications documentation must mention adding jar file to the class path in the properties file.

In the install-dir/samples/java/webapps/security/jdbcrealm/docs/index.html, under 'Compiling and Assembling the Application' section, there must be a mention of adding JDBC driver jar file to class path suffix in the jdbcrealm.build.properties file.

6413058 

server.xml does not store the full file pattern for converting and including search .

The schema does not store the full file pattern allowed by both the Admin Console and the search administration tools in this version of the Web Server. It also has no way to represent the full file pattern that might sometimes need migration from the previous versions of the Web Server.  

6632936 

On Red Hat Linux Enterprise Linux 5, Search functionality does not work properly.

On a Red Hat Enterprise Linux machine, if the compat-libstdc++ library is installed, you must remove the installed rpm and download/install the compat-libstdc++-296-2.96-132.7.2.i386.rpm .

For x86 32–bit and 64–bit download and install the compat-libstdc++-296-2.96-132.7.2.i386.rpm.

Do not download/install an rpm from unreliable sources as it may lead to security vulnerabilities.

6376901 

Limitation supporting basic and digest-based ACLs for resources in the same directory.

If the server uses digest and basic-based ACLs in different parts of their doc tree, attempting to use both simultaneously on different files or resources in the same directory is not possible. 

6431287 

TLS_ECDH_RSA_* require the server cert signed with RSA keys.

Cipher suites of the form TLS_ECDH_RSA_* requires server to have an ECC keypair with a cert signed using RSA keys. Note that this precludes using these cipher suites with self-signed certificates. This requirement is inherent to these cipher suites and is not a bug. The server should detect and warn about wrong configurations related to these cipher suites but currently it does not do so.

6611067 

Red Hat Enterprise Linux instance fails to start when the file system SELinux security is enabled.

Newer Linux distributions have new kernel security extensions enabled from the SELinux project. These extensions allow finer grained control over system security. However, SELinux also changes some default system behaviors, such as shared library loading that can be problematic to third-party programs. If you receive the error message “Cannot restore segment prot after reloc: Permission denied" when starting the Web Server Admin Server or instance, that means the system is SELinux enabled. 

Workaround

To overcome this failure: 

1. Change the default security context for the libraries loaded by the Web Server by typing the following command:

   chcon -t texrel_shlib_t $WS_DIR/lib/*.so

2. Disable SELinux by adding the following line to the /etc/sysconfig/selinux file.

   SELINUX=disabled

6602075 

Sun crypto 1000 with Web Server needs Solaris 10 patch 125465-02 (SPARC) and 125466-02 (x86).

Workaround

The required patch for the Solaris 10 platform (SPARC) is available here: 

http://sunsolve.central.sun.com/search/document.do?assetkey=1-21-125465-02-1

The required patch for the Solaris 10 platform (x86) is available here:  

http://sunsolve.central.sun.com/search/document.do?assetkey=1-21-125466

6324321 

Descriptive error message is not displayed when an error occurs remotely.

When an exception occurs remotely, error messages are logged in the error log of the remote instance. However, the local instance currently displays a generic remote exception which does not clearly indicate which error log that the user must view. 

6396820 

Session replication does not failover correctly when cookies are disabled on the client.

6406176 

When enabled, session replication should be the default session manager.

After enabling session replication by using the Admin Console or the CLI, or by editing the server.xml file, session replication is not really enabled. Instead, sun-web.xml needs to be manually edited.

4858178 

Web container writes to stderr.

6349517 

Incorrect web application session statistics for MaxProcs > 1 mode.

Web Server runs in multi-process mode. The MaxProcs configuration variable in the magnus.conf is used to set the maximum number of processes. If the value for MaxProcs is set to greater than 1, the Web Server uses mmap-based session manager so that the session could be shared among different JVMs. While collecting statistics from multiple processes, web application MBeans provide session for individual MBeans. There is no way to find the true number of sessions by seeing individual MBean's web application session statistics.

6394715 

Web container deletes the disabled web application MBeans object.

When the web application is disabled by setting the <enabled> element to false in the server.xml file, the web container deletes the web application's MBeans and hence treats it as a closed or deleted web application. Since disabled objects are deleted, statistics are also lost.

6419070 

No information is logged in error logs at the finest log level on successful JNDI resource creation.

6422200 

com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse does 1 byte reads.

When reading the server.xml file, the first line containing the XML version number and the encoding is read 1 byte at a time.

6432870 

Servlet container collects statistics when stats enabled element is set to false in the server.xml file.

6440064 

Servlet container creates a thread per virtual server.

6501184 

REQ_EXIT causes javax.servlet.ServletException.

6567124 

JSF Web Applications running on Web Server 7.0 may break when running on Web Server 7.0 Update 1.

Web Server 7.0 Update 1 ships with JavaServer Faces 1.2 technology. All JavaServer Faces web applications are expected to work with Web Server 7.0 Update 1 without any modifications. However, there are a few known compatibility issues with JavaServer Faces 1.2 and might require applications to be modified to address these incompatibilities. The incompatibilities are documented in the JavaServer Faces release notes at: https://javaserverfaces.dev.java.net/rlnotes/1.2_04/issues.html.

Java ES 5 Portal Server users are suggested to delay upgrading to Web Server 7.0 Update 1 until Java ES 5 Update 1 is released.  

6543814 

Search filter “*” does not work correctly for multi-byte strings.

6549619 

On Windows 2003, when a command is executed from the CLI, the message is not encoded correctly.

5046634  

There is no functionality equivalent to use-responseCT-for-headers in Web Server 7.0.

Response header encoding is enabled at the web-app level by setting the value of the configuration parameter use-responseCT-for-headers to any of the values; yes, true, or on in the web-app/sun-web.xml file.

For example, set Response header encoding as follows: 

<sun-web-app>
<parameter-encoding form-hint-field="j_encoding"/>
<property name="use-responseCT-for-headers" value="true" />
<session-config>
<session-manager/>
</session-config>
<jsp-config/>
</sun-web-app>

6630841 

FastCGI Handler new Role is always created with "English" name. 

6632818 

Unlocalized strings are seen in CGI settings page. 

6628910 

CLI installer "Enter your option" is in English in localization locale. 

6633333 

Links at the bottom of the deployed instance's search page (http://instance:port/search) are not correct when the browser is set to german locale.

Workaround

German user's should manually paste the below URLs in their browser's address bar:  

Terms of use: http://www.sun.com/share/text/termsofuse.html

Privacy policy: http://de.sun.com/privacy

Trademarks: http://www.sun.com/suntrademarks/

6484181 

Portal Server configures JVM stack size to 128K (too low) for Web Server 7.0 64–bit to start.

If Web Server 7.0 is already configured in 64–bit mode, and the Portal Server installation is started, Portal Server configuration does not set stack size to 128K. However, if both Portal Server and Web Server are already installed and configured in 32–bit mode, switching to 64–bit mode involve series of manual steps that are described in the Workaround section. 

Workaround

If Portal Server part of Java ES 5 is deployed on top of the 32–bit version of Web Server 7.0, and if you would like to start the server in 64-bit mode, perform the following steps: 

1. # install_dir/bin/wadm delete-jvm-options --user=admin --port=8989 --password-file=passfile --config=HOST_NAME "-Xms512M -Xmx768M -Xss128k"

2. # install_dir/bin/wadm create-jvm-options --user=admin --port=8989 --password-file=passfile --config=HOST_NAME "-Xms512M -Xmx768M -Xss512k"

3. Increase the native stack size of Web Server 7.0 to 139264 by typing the following command:

   # install_dir/bin/wadm set-thread-pool --user=admin --config=config_name --password-file=filename native-stack-size=139264

4. Deploy the configuration.

   # install_dir/bin/wadm deploy-config

6487041 

schemagen/xjc/wsgen/wsimport scripts not present in Java ES Web Server installation.

schemagen/xjc/wsgen/wsimport scripts are present in different locations in Java ES installation and stand-alone installation of Web Server.

Workaround

The scripts are part of the Web Services components. In a stand-alone Web Server installation, these scripts and JAR files are located in install_dir/bin and install_dir/lib directories respectively.

In Java ES installation, scripts and JAR files are installed as part of the shared component and they reside outside the Web Server installation root.  

The location of scripts and JAR files on different platforms are listed below: 

Solaris OS: 

• Scripts are under /opt/SUNWjax/bin directory.

• JAR files are under /opt/SUNWjax/lib and /usr/share/lib directory.

Linux and HP-UX: 

• scripts are under /opt/sun/bin and /opt/sun/share/jaxb/bin directories.

• JAR files are under /opt/sun/share/jaxb/lib, /opt/sun/share/lib and /opt/sun/private/share/lib directories.

Windows: 

• Scripts are under <JES_installation_dir>\share\bin and <JES_installation_dir>\share\jaxb2\bin directories.

• JAR files are under <JES_installation_dir>\share\jaxb2\lib and <JES_installation_dir>\share\lib directories.

6432106 

Sun Java System Portal Server search throws exception after Web Server upgrade.

Portal Server search functionality throws exception when upgrading Web Server from Java ES 4 to Java ES 5.  

Workaround

Move the existing libdb-3.3.so and libdb_java-3.3.so library files to an appropriate location, somewhere outside the Web Server's private directories. Once the Portal Server libraries are in a suitable location, that path must be specified for the <libdb-3.3.so path>:<libdb_java-3.3.so path> in the following commands.

On Solaris platform, perform the following steps: 

1. Copy the libdb-3.3.so and libdb_java-3.3.so files from Web Server 6.1 lib directory to an appropriate location.

   ---

   Note –

   For HP-UX, the files are libdb-3.3.sl and libdb_java-3.3.sl. For windows, the files are libdb-3.3.dll and libdb_java-3.3.dll.

   ---

   ---

   Caution –

   Do not copy the library files to Web Server 7.0 private directories (For example, lib directory).

   ---

2. Create a directory (mkdir) by name /portal_libraries. Copy the library files libdb-3.3.so and libdb_java-3.3.so to /portal_libraries.

3. Use the wadm command to inform the Web Server about the location of the library files.

4. Get the current native library path setting by typing the following administration CLI command:

   get-jvm-prop -user=admin --config=hostname native-library-path-prefix

   Save the output.

5. Append the copied libdb-3.3.so and libdb_java-3.3.so path to the existing native library path by typing the following administration CLI command.

   set-jvm-prop --config=hostname native-library-path-prefix=<existing native library-path>:</portal-libraries-path>

   where, portal-libraries-path is the location of where you copied the libdb-3.3.so and libdb_java-3.3.so files in Step 1.

   If you do not get any results or output for the get-jvm-prop command, at the command prompt, set the native-library-path-prefix:

   native-library-path-prefix=</portal-libraries-path>

6. ---

   Note –

   For Windows platform, use ';' as the separator for native-library-path-prefix parameter as follows:

   native-library-path-prefix=<existing native libarary path>;<portal-libraries-path>

   For non-Windows platform, use the ':' as the separator for native-library-path-prefix parameter as follows:

   native-library-path-prefix=<existing native libarary path>:<portal-libraries-path>

   ---

7. Deploy the modified configuration by typing the following command:

   deploy-config [--user=admin-user] config-name

6504178 

Migration logs reports a bogus "root is not a valid user" message on Java ES 5.

While migrating from Java ES 4 to Java ES 5 on UNIX platforms, the migration log file reports WARNING: "root is not a valid user". This is incorrect as the "root" user is valid on that host.

6453037 

A lot of warnings/info messages displayed at Web Server startup on the standard output instead of routing these messages to the log file.

6549580 

Web Server running on Windows contains no description for the service and the description is not updated after applying Java ES Update 1 patches.

6550622 

When upgrading Java ES 5 software to Java ES 5 Update 1, Portal Server samples fail with JSF exceptions if you have upgraded only Web Server but not the Portal Server.

For more information, see Compatibility Issues.

6643821 

SMF commands removes Java ES environment from startserv and stopserv scripts (Solaris 10 only).

Workaround

Set the following LD_LIBRARY_PATH in the Solaris 10 environment. LD_LIBRARY_PATH=/usr/lib/mps/secv1:/usr/lib/mps:/usr/lib/mps/sasl2:$LD_LIBRARY_PATH