claccess

none

Manage Sun Cluster access policies

cldevice

cldev

Manage Sun Cluster devices

cldevicegroup

cldg

Manage Sun Cluster device groups

clinterconnect

clintr

Manage the Sun Cluster interconnect

clnasdevice

clnas

Manage access to NAS devices for Sun Cluster

clnode

none

Manage Sun Cluster nodes

clquorum

clq

Manage Sun Cluster quorum

clquorumserver

clqs

Configure and manage quorum server processes on the quorum server host

clreslogicalhostname

clrslh

Manage Sun Cluster resources for logical host names

clresource

clrs

Manage resources for Sun Cluster data services

clresourcegroup

clrg

Manage resource groups for Sun Cluster data services

clresourcetype

clrt

Manage resource types for Sun Cluster data services

clrssharedaddress

clrssa

Manage Sun Cluster resources for shared addresses

clsetup

none

Configure Sun Cluster interactively. This command has no subcommands.

clsnmphost

none

Administer Sun Cluster SNMP hosts

clsnmpmib

none

Administer the Sun Cluster SNMP MIB

clsnmpuser

none

Administer Sun Cluster SNMP users

cltelemetryattribute

clta

Configure system resource monitoring.

cluster

none

Manage the global configuration and status of Sun Cluster

clvxvm

none

Configure Veritas Volume Manager for Sun Cluster

allow

Allows the specified machine or machines access to the cluster configuration.

allow-all

Allows all nodes access to the cluster configuration.

deny

Denies the specified machine or machines access to the cluster configuration.

deny-all

Denies all nodes access to the cluster configuration.

list

Displays the names of the machines that have access to the cluster configuration.

set

Sets the authentication protocol to the value that you specify with the -a option.

show

Displays the names of the machines that have access to the cluster configuration.

check

Performs a consistency check to compare the kernel representation of the devices against the physical devices.

clear

Removes all DID references to underlying devices that are detached from the current node.

combine

Combines the specified DID instance with a new destination instance.

export

Exports configuration information for a cluster device.

list

Displays all device paths.

monitor

Turns on monitoring for the specified disk paths.

populate

Populates the global-devices namespace.

refresh

Updates the device configuration information that is based on the current device trees on a cluster node.

rename

Moves the specified DID instance to a new DID instance.

repair

Performs a repair procedure on the specified device instances.

replicate

Configures DID devices for use with controller-based replication.

set

Sets the properties of the specified device.

show

Displays a configuration report for all specified device paths.

status

Displays the status of the disk paths that are specified as operands to the command.

unmonitor

Turns off monitoring for the disk paths that are specified as operands to the command.

add-device

Adds new member disk devices to an existing raw-disk device group.

add-node

Adds new nodes to an existing device group.

create

Creates a new device group.

delete

Deletes device groups.

disable

Disables offline device groups.

enable

Enables device groups.

export

Exports the device-group configuration information.

list

Displays a list of device groups.

offline

Takes device groups offline.

online

Brings device groups online on a pre-designated node.

remove-device

Removes member disk devices from a raw-disk device group.

remove-node

Removes nodes from existing device groups.

set

Sets attributes that are associated with a device group.

show

Generates a configuration report for device groups.

status

Generates a status report for device groups.

switch

Transfers device groups from one primary node in a Sun Cluster configuration to another node.

sync

Synchronizes device-group information with the clustering software.

add

Adds the new cluster interconnect components that are specified as operands to the command.

disable

Disables the interconnect components that are specified as operands to the command.

enable

Enables the interconnect components that are specified as operands to the command.

export

Exports the cluster interconnect configuration information.

remove

Removes the cluster interconnect components that are supplied as operands to the command.

show

Displays the configuration of interconnect components.

status

Displays the status of the interconnect paths.

add

Adds a NAS device to the Sun Cluster configuration.

add-dir

Adds the specified directories of an already configured NAS device to the cluster configuration.

export

Exports the cluster NAS device configuration information.

list

Displays the NAS devices configured in the cluster.

remove

Removes the specified NAS device or devices from the Sun Cluster configuration.

remove-dir

Removes the specified NAS directory or directories from the Sun Cluster configuration.

set

Sets specified properties of a specific NAS device.

show

Displays configuration information for NAS devices in the cluster.

add

Configures and adds a node to the cluster.

add-farm

Adds a farm node to a cluster.

clear

Removes a node from the Sun Cluster software configuration.

evacuate

Attempts to switch over all resource groups and device groups from the specified node to a new set of primary nodes.

export

Exports the node or farm configuration information to a file or to the standard output (stdout).

list

Displays the names of nodes that are configured in the cluster or in the farm.

remove

Removes a node from the cluster.

remove-farm

Removes a farm node from a cluster.

set

Sets the properties that are associated with the node that you specify.

show

Displays the configuration of the specified node or nodes.

show-rev

Displays the names of and release information about the Sun Cluster packages that are installed on a node.

status

Displays the status of the node or nodes that you specify.

add

Adds the specified shared device as a quorum device.

disable

Puts a quorum device or node in the quorum maintenance state.

enable

Removes a quorum device or a node from the quorum maintenance state.

export

Exports the configuration information for the cluster quorum.

list

Displays the names of quorum devices that are configured in the cluster.

remove

Removes the specified quorum device or devices from the Sun Cluster quorum configuration.

reset

Resets the entire quorum configuration to the default vote count settings.

show

Displays the properties of quorum devices.

status

Displays the status and vote counts of quorum devices.

clear

Removes outdated cluster information from the quorum server.

show

Displays the configuration information about the quorum server.

start

Starts the quorum server process on the host machine.

stop

Stops the quorum server process.

create

Creates new logical host name resources.

delete

Deletes logical host name resources.

disable

Disables logical host name resources.

enable

Enables logical host name resources.

export

Exports logical host name resource configuration,

list

Displays a list of the logical host name resources.

list-props

Displays a list of the properties of the logical host name resources.

monitor

Turns on monitoring for logical host name resources.

reset

Clears an error flag that is associated with logical host name resources.

set

Sets specified properties of the logical host name resources.

show

Displays the configuration of logical host name resources.

status

Displays the status of logical host name resources.

unmonitor

Turns off monitoring for logical host name resources.

create

Creates the resources that are specified as operands to the command.

delete

Deletes the resources that are specified as operands to the command.

disable

Disables resources.

enable

Enables resources.

export

Exports the cluster resource configuration.

list

Displays a list of cluster resources.

list-props

Displays a list of resource properties.

monitor

Turns on monitoring for resources.

reset

Clears error flags that are associated with cluster resources.

set

Sets resource properties.

show

Displays resource configuration.

status

Displays resource status.

unmonitor

Turns off resource monitoring.

add-node

Adds a node to the end of the Nodelist property for a resource group.

create

Creates a new resource group.

delete

Deletes a resource group.

evacuate

Brings offline all resource groups on the nodes that you specify with the -n option.

export

Writes the configuration information for a resource group to a file or to the standard output (stdout).

list

Displays a list of resource groups.

manage

Brings a resource group that you specify to a managed state.

offline

Brings a resource group that you specify to an offline state.

online

Brings a resource group that you specify to an online state.

quiesce

Brings the specified resource group to a quiescent state.

remaster

Switches a resource group that you specify to its most preferred node.

remove-node

Removes a node from the Nodelist property of a resource group.

restart

Takes a resource group offline and then back online on the same set of primary nodes that originally hosted the resource group.

resume

Clears the suspended state of any suspended resource groups that you specify.

set

Sets the properties that are associated with the resource groups that you specify.

show

Generates a configuration report for resource groups that you specify.

status

Generates a status report for resource groups that you specify.

suspend

Suspends Resource Group Manager (RGM) control over all applications that are managed by a resource group that you specify.

switch

Changes the node, or set of nodes, that is mastering a resource group that you specify.

unmanage

Brings a resource group that you specify to an unmanaged state.

add-node

Adds the specified nodes to the node list for resource types.

export

Exports the cluster resource-type configuration.

list

Displays a list of resource types.

list-props

Displays a list of the resource extension properties or resource type properties of resource types.

register

Registers resource types.

remove-node

Removes a node from the list of nodes for which the resource types in the operand list are registered.

set

Sets properties of resource types.

show

Displays configuration information about resource types that are registered in the cluster.

unregister

Unregisters resource types.

create

Creates shared address resources.

delete

Deletes shared address resources.

disable

Disables shared address resources.

enable

Enables shared address resources.

export

Exports shared address resource configuration.

list

Displays a list of shared address resources.

list-props

Displays a list of properties of shared address resources.

monitor

Turns on monitoring for shared address resources.

reset

Clears an error flag that is associated with shared address resources.

set

Sets specified properties of shared address resources.

show

Displays the configuration of shared address resources.

status

Displays the status of shared address resources.

unmonitor

Turns off monitoring for shared address resources.

add

Adds an SNMP host to the specified node configuration.

export

Exports the SNMP host information from the specified node.

list

Lists the SNMP hosts that are configured on the specified node.

remove

Removes an SNMP host from the node configuration.

show

Displays the SNMP host configuration information on the specified node.

disable

Disables one or more of the cluster MIBs on the specified nodes.

enable

Enables one or more cluster MIBs on the specified node.

export

Exports the cluster MIB configuration information.

list

Displays a list of cluster MIBs on the specified nodes.

set

Sets the SNMP protocol setting that is used on one or more of the MIBs.

show

Displays configuration information for MIBs on the specified nodes.

create

Adds a user to the SNMP user configuration on the specified node.

delete

Deletes an SNMPv3 user from the specified node.

export

Exports the SNMP user information from the specified node.

list

Prints a list of SNMPv3 users that are configured on the specified node.

set

Sets the configuration of a user on the specified node.

set-default

Sets the default user and security level to use when sending traps using SNMPv3.

show

Displays the information about the users on the specified node.

disable

Disables the specified telemetry attribute for the specified object type.

enable

Enables data collection for the specified telemetry attribute for the specified object types.

export

Exports the configuration of the telemetry attributes of object types and object instances to a file or to the standard output (stdout).

list

Displays the telemetry attributes that are configured for the specified object types.

print

Displays system resource usage for the specified telemetry attributes that are enabled for the specified object instances or object types.

set-threshold

Modifies the settings of a threshold for a specified telemetry attribute on a specified object on a node.

show

Displays the properties that are configured for telemetry attributes on object types or object instances.

create

Creates a cluster by using configuration information that is stored in a clconfigfile file.

export

Exports the configuration information in a cluster configuration file.

list

Displays the name of the cluster on which you issue the cluster command.

list-cmds

Prints a list of all available Sun Cluster commands.

rename

Renames the cluster on which you issue the cluster command.

restore-netprops

Repairs the cluster private-network settings of the cluster on which you issue the cluster command.

set

Sets the properties of the cluster on which you issue the cluster command.

set-netprops

Sets the properties of the cluster private network address.

show

Displays detailed configuration information about cluster components for the specified clusters.

show-netprops

Displays the private network address settings.

shutdown

Shuts down the cluster on which you issue the cluster command in an orderly fashion.

status

Displays the status of cluster components in the specified cluster.

encapsulate

Encapsulates the root disk and performs other Sun Cluster-specific tasks.

initialize

Initializes VxVM and performs other Sun Cluster-specific tasks.