内に含ま
その他のドキュメント
サポート リソース
|  PDF 文書ファイルをダウンロードする (514 KB)
Appendix A Files for Configuring
Sun Cluster HA for Solaris Zones Resources
The /opt/SUNWsczone/util directory contains files
that automate the process of configuring Sun Cluster HA for Solaris Zones
resources. Listings of these files are provided in the following sections:
Listing of sczbt_config
#
# Copyright 2005 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# This file will be sourced in by sczbt_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
# RS - Name of the resource
# RG - Name of the resource group containing RS
# PARAMETERDIR - Name of the parameter file direcrory
# SC_NETWORK - Identfies if SUNW.LogicalHostname will be used
# true = zone will use SUNW.LogicalHostname
# false = zone will use it's own configuration
#
# The configuration of a zone's network addresses depends on
# whether you require IPMP protection or protection against
# the failure of all physical interfaces.
#
# If you require only IPMP protection, configure the zone's
# addresses by using the zonecfg utility and then place the
# zone's address in an IPMP group.
#
# To configure this option set
# SC_NETWORK=false
# SC_LH=
#
# If IPMP protection is not required, just configure the
# zone's addresses by using the zonecfg utility.
#
# To configure this option set
# SC_NETWORK=false
# SC_LH=
#
# If you require protection against the failure of all physical
# interfaces, choose one option from the following list.
#
# - If you want the SUNW.LogicalHostName resource type to manage
# the zone's addresses, configure a SUNW.LogicalHostName
# resource with at least one of the zone's addresses.
#
# To configure this option set
# SC_NETWORK=true
# SC_LH=<Name of the SC Logical Hostname resource>
#
# - Otherwise, configure the zone's addresses by using the
# zonecfg utility and configure a redundant IP address
# for use by a SUNW.LogicalHostName resource.
#
# To configure this option set
# SC_NETWORK=false
# SC_LH=<Name of the SC Logical Hostname resource>
#
# Whichever option is chosen, multiple zone addresses can be
# used either in the zone's configuration or using several
# SUNW.LogicalHostname resources.
#
# e.g. SC_NETWORK=true
# SC_LH=zone1-lh1,zone1-lh2
#
# SC_LH - Name of the SC Logical Hostname resource
# FAILOVER - Identifies if the zone's zone path is on a
# highly available local file system
#
# e.g. FAILOVER=true - highly available local file system
# FAILOVER=false - local file system
#
# HAS_RS - Name of the HAStoragePlus SC resource
#
RS=
RG=
PARAMETERDIR=
SC_NETWORK=
SC_LH=
FAILOVER=
HAS_RS=
#
# The following variable will be placed in the parameter file
#
# Parameters for sczbt (Zone Boot)
#
# Zonename Name of the zone
# Zonebootopt Zone boot options
# Milestone SMF Milestone which needs to be online
# before the zone is considered booted
#
# Note: Zonebootopt="-s" requires Milestone=single-user
#
Zonename=
Zonebootopt=
Milestone=multi-user-server
|
Listing of sczsh_config
#
# Copyright 2005 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# This file will be sourced by sczsh_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
# RS - Name of the resource
# RG - Name of the resource group containing RS
# SCZBT_RS - Name of the SC Zone boot resource
# PARAMETERDIR - Name of the parameter file directory
# Zonename - Name of the zone
# ServiceStartCommand - Command including all options to start
# the service in the configured zone
# ServiceStopCommand - Command including all options to stop
# the service in the configured zone
# ServiceProbeCommand - Command including all options to probe
# the service in the configured zone
#
RS=""
RG=""
SCZBT_RS=""
PARAMETERDIR=""
#
# The following parameters will be put in the agents parameterfile:
#
Zonename=""
ServiceStartCommand=""
ServiceStopCommand=""
ServiceProbeCommand=""
|
Listing of sczsmf_config
#
# Copyright 2005 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# This file will be sourced in by sczsmf_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
# RS - Name of the resource
# RG - Name of the resource group containing RS
# SCZBT_RS - Name of the SC Zone boot resource
# ZONE - Name of the Zone
#
# For SERVICE, RECURSIVE and STATE, refer to the svcadm(1M)
# man page
#
# SERVICE - {FMRI | pattern}
# FMRI - Fault management resource identifier
# pattern - Pattern matching a service
#
# RECURSIVE - {false | true} Default: true
# False - Just enable the service and no dependents
# True - Enable the service and recursively enable
# its dependents
#
# RECURSIVE=true equates to svcadm enable "-r"
#
# STATE - {false | true} Default: true
# False - Do not wait until service state is reached
# True - Wait until service state is reached
#
# STATE=true equates to svcadm enable/disable "-s"
#
# SERVICE_PROBE - Script to check the SMF service
#
# The optional parameter, SERVICE_PROBE, provides the
# ability to check that the SMF service is working.
# This must be a script within the zone and must
# adhere to these return codes,
#
# 0 - The SMF service is working
# 100 - The SMF service should be restarted
# 201 - The SMF service should initiate a failover of
# Resource Group
#
# Note: That return code 201, requires that this resource
# has an appropriate extension property value for
# FAILOVER_MODE and FAILOVER_ENABLED=TRUE
#
# For FAILOVER_MODE refer to the r_properties(5) man page.
#
RS=
RG=
SCZBT_RS=
ZONE=
SERVICE=
RECURSIVE=true
STATE=true
SERVICE_PROBE=
|
|
