Download this book in PDF (943 KB)

Driver Entry Points

•   A
  • aread(9E) – asynchronous read from a device
  • attach(9E) – Attach a device to the system, or resume it
  • awrite(9E) – asynchronous write to a device
•   B
•   C
  • chpoll(9E) – poll entry point for a non-STREAMS character driver
  • close(9E) – relinquish access to a device
  • csx_event_handler(9E) – PC Card driver event handler
•   D
  • detach(9E) – detach or suspend a device
  • devmap(9E) – validate and translate virtual mapping for memory mapped device
  • devmap_access(9E) – device mapping access entry point
  • devmap_contextmgt(9E) – driver callback function for context management
  • devmap_dup(9E) – device mapping duplication entry point
  • devmap_map(9E) – device mapping create entry point
  • devmap_unmap(9E) – device mapping unmap entry point
  • dump(9E) – dump memory to device during system failure
•   E
•   F
  • _fini(9E) – loadable module configuration entry points
•   G
  • getinfo(9E) – get device driver information
  • gld(9E) – Generic LAN Driver entry points
  • gldm_get_stats(9E) – Generic LAN Driver entry points
  • gldm_intr(9E) – Generic LAN Driver entry points
  • gldm_ioctl(9E) – Generic LAN Driver entry points
  • gldm_reset(9E) – Generic LAN Driver entry points
  • gldm_send(9E) – Generic LAN Driver entry points
  • gldm_set_mac_addr(9E) – Generic LAN Driver entry points
  • gldm_set_multicast(9E) – Generic LAN Driver entry points
  • gldm_set_promiscuous(9E) – Generic LAN Driver entry points
  • gldm_start(9E) – Generic LAN Driver entry points
  • gldm_stop(9E) – Generic LAN Driver entry points
•   H
•   I
  • identify(9E) – determine if a driver is associated with a device
  • _info(9E) – loadable module configuration entry points
  • _init(9E) – loadable module configuration entry points
  • ioctl(9E) – control a character device
•   J
•   K
  • ks_snapshot(9E) – take a snapshot of kstat data
  • ks_update(9E) – dynamically update kstats
•   L
•   M
  • mmap(9E) – check virtual mapping for memory mapped device
•   N
•   O
  • open(9E) – gain access to a device
•   P
  • power(9E) – power a device attached to the system
  • print(9E) – display a driver message on system console
  • probe(9E) – determine if a non-self-identifying device is present
  • prop_op(9E) – report driver property information
  • put(9E) – receive messages from the preceding queue
•   Q
  • quiesce(9E) – quiesce a device
•   R
  • read(9E) – read data from a device
•   S
  • segmap(9E) – map device memory into user space
  • srv(9E) – service queued messages
  • strategy(9E) – perform block I/O
•   T
  • tran_abort(9E) – abort a SCSI command
  • tran_bus_reset(9E) – reset a SCSI bus
  • tran_destroy_pkt(9E) – SCSI HBA packet preparation and deallocation
  • tran_dmafree(9E) – SCSI HBA DMA deallocation entry point
  • tran_getcap(9E) – get/set SCSI transport capability
  • tran_init_pkt(9E) – SCSI HBA packet preparation and deallocation
  • tran_pkt_constructor(9E) – SCSI HBA packet allocation and deallocation
  • tran_pkt_destructor(9E) – SCSI HBA packet allocation and deallocation
  • tran_quiesce(9E) – quiesce and unquiesce a SCSI bus
  • tran_reset(9E) – reset a SCSI bus or target
  • tran_reset_notify(9E) – request to notify SCSI target of bus reset
  • tran_setcap(9E) – get/set SCSI transport capability
  • tran_setup_pkt(9E) – SCSI HBA packet allocation and deallocation
  • tran_start(9E) – request to transport a SCSI command
  • tran_sync_pkt(9E) – SCSI HBA memory synchronization entry point
  • tran_teardown_pkt(9E) – SCSI HBA packet allocation and deallocation
  • tran_tgt_free(9E) – request to free HBA resources allocated on behalf of a target
  • tran_tgt_init(9E) – request to initialize HBA resources on behalf of a particular target
  • tran_tgt_probe(9E) – request to probe SCSI bus for a particular target
  • tran_unquiesce(9E) – quiesce and unquiesce a SCSI bus
•   U
•   V
•   W
  • write(9E) – write data to a device
•   X
•   Y
•   Z