Index (Sun Cluster Software Installation Guide for Solaris OS)

Skip to ContentSun and Oracle Channel Sun How to Buy Log In

Sun Cluster Software Installation Guide for Solaris OS

查看这本书:

包含在

查找更多文档

专项支持资源

以 PDF 格式下载本书 (1521 KB)

下一页: Book Information


A

	adapters
		IP Network Multipathing groups
			requirements ( ) ( )
			test IP addresses ( )
		local MAC address
			changes during upgrade ( ) ( )
			NIC support ( )
			required setting ( )
		SBus SCI restriction ( )
		SCI-PCI
			installing Solaris packages ( )
			package requirements ( )
		tagged VLAN
			cluster interconnect guidelines ( )
			public network guidelines ( )

	adding
		See also configuring
		See also installing
		drives to a disk set ( )
		mediator hosts ( )
		nodes to the Sun Cluster module to Sun Management Center ( )

	administrative console
		installing CCP software ( )
		IP addresses ( )
		`MANPATH` ( )
		`PATH` ( )

	affinity switchover for data replication
		configuring for data replication ( )
		extension property for data replication ( )

	alternate boot path, displaying ( )

	Apache
		installing packages ( )
		modifying scripts during upgrade ( )

	application resource groups
		configuring for data replication ( )
		guidelines ( )

	asynchronous data replication ( )

	authentication, See authorized-node list

	authorized-node list
		adding nodes ( )
		removing nodes ( )

	automatic power-saving shutdown, restriction ( )

	`autoscinstall.class` file ( )

	Availability Suite
		preparing for cluster upgrade ( ) ( )
		using for data replication ( )


B

	backup cluster, role in data replication ( )

	bitmap
		point-in-time snapshot ( )
		remote mirror replication ( )

	boot devices, alternate boot path ( )


C

	`cconsole` command ( )
		installing the software ( )
		using ( ) ( )

	`ccp` command ( )

	`ce_taskq_disable` variable ( )

	`class` file, modifying ( )

	Cluster Control Panel (CCP) software
		installing ( )
		starting ( )

	cluster file systems
		See also shared file systems
		caution notice ( )
		communication end-points restriction ( )
		configuring ( )
		`fattach` command restriction ( )
		`forcedirectio` restriction ( )
		LOFS restriction ( )
		mount options ( )
		planning ( ) ( )
		quotas restriction ( )
		verifying the configuration ( )
		VxFS restrictions ( )

	cluster interconnects
		configuring on a single-node cluster ( )
		planning ( )

	cluster mode, verifying ( )

	cluster name ( )

	cluster nodes
		adding new nodes
			by using JumpStart ( )
			by using `scinstall` ( )
			correcting SCSI reservations ( )
		adding to the Sun Cluster module to Sun Management Center ( )
		determining the node-ID number ( )
		establishing a new cluster
			by using JumpStart ( )
			by using `scinstall` ( )
			by using SunPlex Installer ( )
		planning ( )
		upgrading
			nonrolling ( )
			rolling ( )
		verifying
			cluster mode ( )
			installation mode ( )

	`clusters` file, administrative console ( )

	common agent container
		upgrading security files ( ) ( )

	communication end-points, restriction on cluster file systems ( )

	configuring
		additional nodes
			by using JumpStart ( )
			by using `scinstall` ( )
		cluster file systems ( )
		cluster interconnects on a single-node cluster ( )
		data replication ( )
		disk sets ( )
		IP Network Multipathing groups ( ) ( )
		`md.tab` file ( )
		multipathing software ( )
		Network Time Protocol (NTP) ( )
		new clusters
			by using JumpStart ( )
			by using `scinstall` ( )
			by using SunPlex Installer ( )
		quorum devices ( )
		Solaris Volume Manager ( )
		Solstice DiskSuite ( )
		state database replicas ( )
		user work environment ( )
		VERITAS Volume Manager (VxVM) ( )

	console-access devices
		IP addresses ( )
		planning ( )
		serial-port numbers ( )

	CVM, See VERITAS Volume Manager (VxVM) cluster feature


D

	data replication
		asynchronous ( )
		configuring
			affinity switchover ( ) ( )
			disk device groups ( )
			file systems for an NFS application ( )
			NFS application resource groups ( )
		definition ( )
		enabling ( )
		example configuration ( )
		guidelines
			configuring resource groups ( )
			managing failover ( )
			managing switchover ( )
		introduction to ( )
		managing a failover ( )
		performing ( )
		point-in-time snapshot ( ) ( )
		remote mirror ( ) ( )
		required hardware and software ( )
		resource groups
			application ( )
			configuring ( )
			creating ( )
			failover applications ( )
			naming convention ( )
			scalable applications ( )
			shared address ( )
		synchronous ( )
		updating a DNS entry ( )
		verifying the configuration ( )

	data services
		installing
			by using Java ES `installer` ( )
			by using `pkgadd` ( )
			by using `scinstall` ( )
			by using SunPlex Installer ( )
			by using Web Start `installer` ( )
		upgrading
			nonrolling ( )
			rolling ( )
			Sun Cluster HA for SAP liveCache ( )

	deporting disk device groups ( )

	device groups
		See also disk device groups
		See also raw-disk device groups
		moving ( ) ( )

	device-ID names
		determining ( )
		displaying ( )
		migrating after upgrade ( )

	DID driver, updating ( )

	Dirty Region Logging (DRL), planning ( )

	disabling
		installation mode ( )
		LOFS ( ) ( ) ( ) ( )
		resources ( )

	disaster tolerance, definition ( )

	disk device groups
		See also device groups
		See also disk groups
		See also raw-disk device groups
		configuring for data replication ( )
		importing and deporting ( )
		planning ( )
		registering changes to ( )
		registering disk groups as ( )
		reminoring ( )
		status ( )
		verifying
			evacuation ( )
			registration ( )

	disk drives, See drives

	disk groups
		See also disk device groups
		configuring ( )
		registering as disk device groups ( )
		verifying the configuration ( )

	disk sets
		adding drives ( )
		configuring ( )
		planning the maximum number ( )
		repartitioning drives ( )
		setting the maximum number ( )

	disk strings, dual-string mediator requirements ( )

	disks, See drives

	disksets, See disk sets

	domain console network interfaces, IP addresses ( )

	Domain Name System (DNS)
		guidelines for updating ( )
		updating in data replication ( )

	drives
		adding to disk sets ( )
		mirroring differing device sizes ( )
		repartitioning ( )

	DRL, planning ( )

	dual-string mediators
		adding hosts ( )
		overview ( )
		planning ( )
		repairing data ( )
		restoring during upgrade
			nonrolling ( )
			rolling ( )
		status ( )
		unconfiguring during upgrade
			nonrolling ( )
			rolling ( )

	Dynamic Multipathing (DMP) ( )


E

	EFI disk labels, restriction ( )

	enabling the kernel cage ( )

	encapsulated root disks
		configuring ( )
		mirroring ( )
		planning ( )
		unconfiguring ( )

	Enclosure-Based Naming, planning ( )

	error messages
		cluster ( )
		`metainit` command ( )
		NTP ( )
		`scconf` command ( )
		`scdidadm` command ( )
		`scgdevs` command ( )
		SunPlex Installer ( )

	`/etc/clusters` file ( )

	`/etc/inet/hosts` file
		configuring ( ) ( )
		planning ( )

	`/etc/inet/ipnodes` file ( )

	`/etc/inet/ntp.conf.cluster` file
		configuring ( )
		starting NTP ( )
		stopping NTP ( )

	`/etc/inet/ntp.conf` file
		changes during upgrade ( ) ( )
		configuring ( )
		starting NTP ( )
		stopping NTP ( )

	`/etc/init.d/xntpd.cluster` command, starting NTP ( )

	`/etc/init.d/xntpd` command
		starting NTP ( )
		stopping NTP ( )

	`/etc/lvm/md.tab` file ( )

	`/etc/name_to_major` file
		non-VxVM nodes ( ) ( )
		VxVM–installed nodes ( )

	`/etc/release` file ( )

	`/etc/serialports` file ( )

	`/etc/system` file
		`ce` adapter setting ( )
		`kernel_cage_enable` variable ( )
		LOFS setting ( ) ( ) ( ) ( )
		stack-size setting ( )
		thread stack-size setting ( )

	`/etc/vfstab` file
		adding mount points ( )
		modifying during upgrade
			nonrolling ( )
			rolling ( )
		verifying the configuration ( )

	evacuating, See moving

	extension properties for data replication
		application resource ( ) ( )
		replication resource ( ) ( )


F

	failover applications for data replication
		affinity switchover ( )
		guidelines
			managing failover ( )
			resource groups ( )

	failover for data replication, managing ( )

	`fattach` command, restriction on cluster file systems ( )

	file systems for NFS application, configuring for data replication ( )

	file–system logging, planning ( )

	`forcedirectio` command, restriction ( )


G

	global devices
		caution notice ( )
		`/global/.devices/` directory
			mirroring ( )
			`node@nodeid` file system ( )
		`/globaldevices` partition
			creating ( )
			planning ( )
		planning ( )
		updating the namespace ( )

	`/global` directory ( )

	global file systems, See cluster file systems

	global zone
		installation requirement ( )
		installing data services ( )


H

	help ( )

	high-priority processes, restriction ( )

	`hosts` file
		configuring ( ) ( )
		planning ( )

	hot spare disks, planning ( )


I

	importing disk device groups ( )

	initialization files ( )

	installation mode
		disabling ( )
		verifying ( )

	installing
		See also adding
		See also configuring
		Apache packages ( )
		Cluster Control Panel (CCP) ( )
		data services
			by using Java ES `installer` ( )
			by using `pkgadd` ( )
			by using `scinstall` ( )
			by using SunPlex Installer ( )
			by using Web Start `installer` ( )
		multipathing software ( )
		Network Appliance NAS devices ( )
		RSMAPI
			Solaris packages ( )
			Sun Cluster packages ( )
		RSMRDT drivers
			Solaris packages ( )
			Sun Cluster packages ( )
		SCI-PCI adapters
			Solaris packages ( )
			Sun Cluster packages ( )
		Solaris
			alone ( )
			with Sun Cluster ( )
		Solstice DiskSuite ( )
			by using `pkgadd` ( )
			by using SunPlex Installer ( )
		Sun Cluster
			packages ( )
			status ( )
			verifying ( )
		Sun Management Center
			requirements ( )
			Sun Cluster module ( )
		Sun StorEdge QFS ( )
		Sun StorEdge Traffic Manager ( )
		VERITAS File System (VxFS) ( )
		VERITAS Volume Manager (VxVM) ( ) ( )

	IP addresses, planning ( )

	IP Filter, restriction ( )

	IP Network Multipathing groups
		configuring ( ) ( )
		planning ( ) ( )
		test-IP-address requirements
			planning ( ) ( )
			upgrade ( )
		upgrading from NAFO groups ( ) ( ) ( )

	IPMP, See IP Network Multipathing groups

	`ipnodes` file ( )

	IPv6 addresses
		private network restriction ( ) ( )
		public network use ( )


J

	JumpStart
		`class` file ( )
		installing Solaris and Sun Cluster ( )

	junctions, See transport junctions


K

	`kernel_cage_enable` variable ( )

	`/kernel/drv/md.conf` file ( )
		caution notice ( ) ( )
		configuring ( )

	`/kernel/drv/scsi_vhci.conf` file ( )


L

	licenses, planning ( )

	loading the Sun Cluster module to Sun Management Center ( )

	local MAC address
		changes during upgrade ( ) ( )
		NIC support ( )
		required setting ( )

	`localonly` property, enabling ( )

	LOFS
		disabling ( ) ( ) ( ) ( )
		re-enabling ( ) ( ) ( ) ( )
		restriction ( )

	log files
		package installation ( )
		Sun Cluster installation ( )
		SunPlex Installer installation ( )

	logging for cluster file systems, planning ( )

	logical addresses, planning ( )

	logical hostname resource, role in data replication failover ( )

	logical network interfaces, restriction ( )

	loopback file system (LOFS)
		disabling ( ) ( ) ( ) ( )
		re-enabling ( ) ( ) ( ) ( )
		restriction ( )


M

	`MANPATH`
		administrative console ( )
		cluster nodes ( )

	`md.conf` file
		caution notice ( )
		configuring ( )
		planning ( )

	`md_nsets` field
		configuring ( )
		planning ( )

	`md.tab` file, configuring ( )

	mediators, See dual-string mediators

	`messages` files
		See also error messages
		cluster ( )
		SunPlex Installer ( )

	metadevices
		activating ( )
		planning the maximum number ( )
		setting the maximum number ( )

	minor-number conflicts, repairing ( )

	mirroring
		differing device sizes ( )
		global namespace ( )
		multihost disks ( )
		planning ( )
		root disks ( )
			caution notice ( )
			planning ( )

	mount options for cluster file systems
		QFS ( )
		requirements ( )
		UFS ( )
		VxFS ( ) ( )

	mount points
		cluster file systems ( )
		modifying the `/etc/vfstab` file ( )
		nested ( )

	moving, resource groups and device groups ( )

	`mpxio-disable` parameter ( )

	multi-user services
		verifying ( ) ( ) ( )

	multihost disks
		mirroring ( )
		planning ( )

	multipathing software ( )

	multiported disks, See multihost disks


N

	NAFO groups
		See also IP Network Multipathing groups
		upgrading to IP Network Multipathing groups ( ) ( )

	`name_to_major` file
		non-VxVM nodes ( ) ( )
		VxVM–installed nodes ( )

	naming convention, replication resource groups ( )

	Network Appliance NAS devices
		configuring as quorum devices ( )
		installing ( )

	Network File System (NFS)
		See also Sun Cluster HA for NFS
		configuring application file systems for data replication ( )
		guidelines for cluster nodes ( )

	Network Time Protocol (NTP)
		configuring ( )
		error messages ( )
		starting ( )
		stopping ( )

	NFS, See Network File System (NFS)

	NIS servers, restriction for cluster nodes ( )

	`nmd` field
		configuring ( )
		planning ( )

	node lists
		disk device groups ( )
		raw-disk device groups
			removing nodes from ( )
			viewing ( )

	nodes, See cluster nodes

	non-global zones, restriction ( )

	noncluster mode
		rebooting into ( )
		rebooting into single-user ( ) ( )

	nonrolling upgrade ( )

	NTP
		configuring ( )
		error messages ( )
		starting ( )
		stopping ( )

	`ntp.conf.cluster` file
		configuring ( )
		starting NTP ( )
		stopping NTP ( )

	`ntp.conf` file
		changes during upgrade ( ) ( )
		configuring ( )
		starting NTP ( )
		stopping NTP ( )


O

	online help, Sun Cluster module to Sun Management Center ( )

	`/opt/SUNWcluster/bin/` directory ( )

	`/opt/SUNWcluster/bin/cconsole` command ( )
		installing the software ( )
		using ( ) ( )

	`/opt/SUNWcluster/bin/ccp` command ( )

	`/opt/SUNWcluster/man/` directory ( )

	Oracle Parallel Server, See Oracle Real Application Clusters


P

	package installation
		Apache ( )
		Cluster Control Panel (CCP) software ( )
		data services
			by using Java ES `installer` ( )
			by using `pkgadd` ( )
			by using `scinstall` ( )
			by using Web Start `installer` ( )
		Sun Cluster software ( )

	partitions
		`/globaldevices` ( ) ( )
		repartitioning drives ( )
		root (`/`) ( )
		`/sds` ( )
		`swap` ( )
		volume manager ( )

	patches
		default installation directory ( )
		patch-list file ( )
		planning ( )

	`PATH`
		administrative console ( )
		cluster nodes ( )

	PCI adapters, See SCI-PCI adapters

	point-in-time snapshot
		definition ( )
		performing ( )

	ports, See serial ports

	primary cluster, role in data replication ( )

	private hostnames
		changing ( )
		planning ( )
		verifying ( )

	private network
		IPv6 address restriction ( )
		planning ( )

	profile, JumpStart ( )

	public network
		IPv6 support ( )
		planning ( )


Q

	QFS, See Sun StorEdge QFS

	quorum devices
		caution notice ( )
		correcting SCSI reservations after adding a third node ( )
		initial configuration ( )
		and mirroring ( )
		Network Appliance NAS devices ( )
		planning ( )
		verifying ( )

	quotas, restriction on cluster file systems ( )


R

	RAID, restriction ( )

	`rarpd` service, restriction for cluster nodes ( )

	raw-disk device group node lists
		removing nodes ( )
		viewing ( )

	raw-disk device groups, See disk device groups

	rebooting
		into noncluster mode ( )
		into single-user noncluster mode ( ) ( )

	registering, VxVM disk device groups ( )

	`release` file ( )

	remote mirror replication
		definition ( )
		performing ( )

	Remote Shared Memory Application Programming Interface (RSMAPI)
		installing Solaris packages ( )
		installing Sun Cluster packages ( )
		package requirements ( )

	removing Sun Cluster software ( )

	repairing
		mediator data ( )
		minor-number conflicts ( )
		storage reconfiguration during upgrade ( )

	replication, See data replication

	resource groups
		data replication
			configuring ( )
			guidelines for configuring ( )
			role in failover ( )
		moving ( ) ( )
		taking offline ( )
		verifying evacuation ( )

	resource types
		registering after upgrade ( ) ( )

	resources, disabling ( )

	rolling upgrade ( )

	root (`/`) file systems, mirroring ( )

	root disk groups
		configuring
			on encapsulated root disks ( )
			on nonroot disks ( )
		planning ( )
		simple ( )
		unconfiguring encapsulated root disks ( )

	root disks
		encapsulating ( )
		mirroring ( )
			caution notice ( )
			planning ( )
		unencapsulating ( )

	root environment, configuring ( )

	`rootdg`, See root disk groups

	routers, restriction for cluster nodes ( )

	RPC service, restricted program numbers ( )

	`rpcmod` settings ( )

	RSMAPI, See Remote Shared Memory Application Programming Interface (RSMAPI)

	RSMRDT drivers
		installing
			Solaris packages ( )
			Sun Cluster packages ( )


S

	SBus SCI adapters, restriction ( )

	scalable applications for data replication ( )

	`sccheck` command, `vfstab` file check ( )

	`scconf` command
		adding nodes to the authorized-node list ( )
		enabling the `localonly` property ( )
		error messages ( )
		removing nodes from a node list
			authorized-node list ( )
			raw-disk device groups ( ) ( )
		verifying installation mode ( )
		viewing private hostnames ( )

	`scdidadm` command
		determining device-ID names ( )
		displaying device-ID names ( )
		error messages ( )
		migrating device IDs after upgrade ( ) ( )
		verifying device-ID migration ( )

	`scgdevs` command
		error messages ( )
		updating the global-devices namespace ( )
		verifying command processing ( )

	SCI-PCI adapters
		installing Solaris packages ( )
		installing Sun Cluster packages ( )
		package requirements ( )

	`scinstall` command
		adding new nodes ( )
		adding new nodes by using JumpStart ( )
		establishing a new cluster
			all nodes ( )
			by using JumpStart ( )
		installing Sun Cluster data services ( )
		uninstalling Sun Cluster ( )
		upgrading Sun Cluster
			nonrolling ( )
			rolling ( )
		verifying Sun Cluster software ( )

	`scsetup` command
		adding cluster interconnects ( )
		changing private hostnames ( )
		postinstallation setup ( )
		registering disk device groups ( )

	`scshutdown` command ( ) ( )

	SCSI devices
		correcting reservations after adding a third node ( )
		installing quorum devices ( )

	`scstat` command
		verifying cluster mode ( )
		verifying disk-group configurations ( )

	`scswitch` command
		moving resource groups and device groups ( ) ( )
		taking resource groups offline ( )

	`scversions` command
		nonrolling upgrade ( )
		rolling upgrade ( )

	`scvxinstall` command, installing VxVM ( )

	`/sds` partition ( )

	secondary cluster, role in data replication ( )

	secondary root disks ( )

	security files
		distributing upgraded files ( ) ( )
		upgrading ( ) ( )

	serial ports
		configuring on the administrative console ( )
		Simple Network Management Protocol (SNMP) ( )

	`serialports` file ( )

	Service Management Facility (SMF)
		verifying online services ( ) ( ) ( )

	shared address resource groups for data replication ( )

	shared file systems
		See also cluster file systems
		required mount parameters for QFS ( )

	shutting down the cluster ( ) ( )

	Simple Network Management Protocol (SNMP), port for Sun Management Center ( )

	single-user noncluster mode
		rebooting into ( ) ( )

	SMF
		verifying online services ( ) ( ) ( )

	snapshot, point-in-time ( )

	SNMP, port for Sun Management Center ( )

	software RAID, restriction ( )

	Solaris
		installing
			alone ( )
			with Sun Cluster ( )
		planning ( )
			`/globaldevices` file system ( )
			partitions ( )
			root (`/`) file system ( )
			software groups ( )
			volume managers ( )
		restrictions
			automatic power-saving shutdown ( )
			EFI disk labels ( )
			interface groups ( )
			IP Filter ( )
			non-global zones ( )
		upgrading
			nonrolling ( )
			rolling ( )
		verifying device-ID migration ( )
		version ( )

	Solaris interface groups, restriction ( )

	Solaris Volume Manager
		coexistence with VxVM ( )
		configuring ( )
		disk sets
			adding drives ( )
			configuring ( )
			repartitioning drives ( )
			setting the maximum number ( )
		dual-string mediators
			adding hosts ( )
			overview ( ) ( )
			repairing bad data ( )
			status ( )
		error messages ( )
		`md.tab` file ( )
		mediators
			See dual-string mediators
		mirroring
			global namespace ( )
			root (`/`) file systems ( )
			root disks ( )
		planning ( )
		state database replicas ( )
		transactional-volume logging
			planning ( )
		volumes
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )

	Solstice DiskSuite
		coexistence with VxVM ( )
		configuring ( )
		disk sets
			adding drives ( )
			configuring ( )
			repartitioning drives ( )
			setting the maximum number ( )
		dual-string mediators
			adding hosts ( )
			overview ( ) ( )
			repairing bad data ( )
			status ( )
		error messages ( )
		installing ( )
			by using `pkgadd` ( )
			by using SunPlex Installer ( )
		`md.tab` file ( )
		mediators
			See dual-string mediators
		metadevices
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )
		mirroring
			root (`/`) file systems ( )
			root disks ( )
		planning ( )
		state database replicas ( )
		trans-metadevice logging
			planning ( )

	SSP, See console-access devices

	stack-size setting ( ) ( )

	starting
		Cluster Control Panel (CCP) ( )
		Sun Management Center ( )

	state database replicas, configuring ( )

	status
		disk device groups ( )
		dual-string mediators ( )
		Sun Cluster
			installation logs ( )
			verifying ( )

	Sun Cluster HA for NFS, restriction with LOFS ( )

	Sun Cluster HA for SAP liveCache, upgrading ( )

	Sun Cluster module to Sun Management Center ( )
		adding nodes ( )
		installing ( )
		loading ( )
		online help ( )
		requirements ( ) ( )
		upgrade ( )

	Sun Enterprise 10000 servers
		dynamic reconfiguration support ( )
		`kernel_cage_enable` variable ( )
		`serialports` file ( )

	Sun Fire 15000 servers
		IP addresses ( )
		serial-port numbers ( )

	Sun Management Center
		installation requirements ( )
		starting ( )
		stopping ( )
		Sun Cluster module ( )
			adding nodes ( )
			installing ( )
			loading ( )
			online help ( )
			upgrading ( )
		upgrading ( )

	Sun StorEdge Availability Suite
		preparing for cluster upgrade ( ) ( )
		using for data replication ( )

	Sun StorEdge QFS
		installing ( )
		mounting shared file systems ( )

	Sun StorEdge Traffic Manager software, installing ( )

	SunPlex Installer
		guidelines ( )
		using to establish a new cluster ( )

	`swap`, planning ( )

	switchback, guidelines for performing in data replication ( )

	switchover for data replication
		affinity switchover ( )
		guidelines for managing ( )
		performing ( )

	SyMON, See Sun Management Center

	synchronous data replication ( )

	system controllers (SC), See console-access devices

	`system` file
		`kernel_cage_enable` variable ( )
		stack-size setting ( )
		thread stack-size setting ( )

	System Service Processor (SSP), See console-access devices


T

	tagged VLAN adapters
		cluster interconnect guidelines ( )
		public network guidelines ( )

	technical support ( )

	`telnet` command, serial-port numbers ( )

	terminal concentrators (TC), See console-access devices

	test-IP-address requirements
		new installations ( ) ( )
		upgrades ( ) ( )

	thread stack-size setting ( )

	three-way mirroring ( )

	Traffic Manager software, installing ( )

	transport adapters, See adapters

	transport junctions, planning ( )


U

	UFS logging, planning ( )

	unencapsulating the root disk ( )

	uninstalling Sun Cluster software ( )

	upgrading ( )
		choosing an upgrade method ( )
		guidelines for ( )
		nonrolling ( )
			data services ( )
			preparing the cluster ( )
			requirements ( )
			resource types ( )
			restoring mediators ( )
			Solaris ( )
			unconfiguring mediators ( )
		recovering from storage changes ( )
		rolling ( )
			data services ( )
			preparing the cluster ( )
			requirements ( )
			resource types ( )
			restoring mediators ( )
			Solaris ( )
			unconfiguring mediators ( )
		Sun Cluster HA for NFS on Solaris 10 ( ) ( )
		Sun Cluster HA for Oracle 3.0 64-bit ( ) ( )
		Sun Cluster HA for SAP liveCache ( )
		Sun Cluster module to Sun Management Center ( )
		Sun Management Center ( )
		Sun StorEdge Availability Suite configuration device ( ) ( )
		verifying
			cluster status ( )
			device-ID conversion ( )
			successful upgrade ( )

	user-initialization files, modifying ( )

	`/usr/cluster/bin/` directory ( )

	`/usr/cluster/bin/sccheck` command, `vfstab` file check ( )

	`/usr/cluster/bin/scconf` command
		adding nodes to the authorized-node list ( )
		enabling the `localonly` property ( )
		error messages ( )
		removing nodes from a node list
			authorized-node list ( )
			raw-disk device groups ( ) ( )
		verifying installation mode ( )
		viewing private hostnames ( )

	`/usr/cluster/bin/scdidadm` command
		determining device-ID names ( )
		displaying device-ID names ( )
		error messages ( )
		migrating device IDs after upgrade ( ) ( )
		verifying device-ID migration ( )

	`/usr/cluster/bin/scgdevs` command
		error messages ( )
		updating the global-devices namespace ( )
		verifying command processing ( )

	`/usr/cluster/bin/scinstall` command
		adding new nodes ( )
		adding new nodes byusing JumpStart ( )
		establishing a new cluster
			all nodes ( )
			by using JumpStart ( )
		installing data services ( )
		uninstalling Sun Cluster ( )
		verifying Sun Cluster software ( )

	`/usr/cluster/bin/scsetup` command
		adding cluster interconnects ( )
		changing private hostnames ( )
		postinstallation setup ( )
		registering disk device groups ( )

	`/usr/cluster/bin/scshutdown` command ( ) ( )

	`/usr/cluster/bin/scstat` command
		verifying cluster mode ( )
		verifying disk-group configurations ( )

	`/usr/cluster/bin/scswitch` command
		moving resource groups and device groups ( ) ( )
		taking resource groups offline ( )

	`/usr/cluster/bin/scversions` command
		nonrolling upgrade ( )
		rolling upgrade ( )

	`/usr/cluster/bin/scvxinstall` command, installing VxVM ( )

	`/usr/cluster/man/` directory ( )


V

	`/var/sadm/install/logs/` directory ( )

	`/var/adm/messages` file ( )

	`/var/cluster/spm/messages` file ( )

	verifying ( )
		cluster status ( )
		data replication configuration ( )
		device group configurations ( )
		device-ID migration ( )
		installation mode ( )
		quorum configurations ( )
		resource group configurations ( )
		`scgdevs` command processing ( )
		Sun Cluster software version ( )
		upgrade ( )
		`vfstab` configuration ( )
		VxVM disk-group configurations ( )

	VERITAS File System (VxFS)
		administering ( )
		installing ( )
		mounting cluster file systems ( ) ( )
		planning ( ) ( )
		restrictions ( )

	VERITAS Volume Manager (VxVM)
		cluster feature
			creating shared disk groups ( )
			installation requirement ( )
		configuring ( )
			disk groups ( )
			non-VxVM nodes ( )
			volumes ( )
		disk device groups
			importing and deporting ( )
			reminoring ( )
		disk-group registration ( )
		encapsulating the root disk ( )
		Enclosure-Based Naming ( )
		installing ( ) ( )
		mirroring the encapsulated root disk ( )
		planning ( ) ( )
		removing man pages ( )
		root disk groups
			configuring on nonroot disks ( )
			configuring on root disks ( )
			planning ( ) ( )
			simple ( )
			unconfiguring from root disks ( )
		root disks
			caution when unencapsulating ( )
			encapsulating ( )
			unencapsulating ( )
		unencapsulating the root disk ( )
		verifying disk-group configurations ( )

	`vfstab` file
		adding mount points ( )
		modifying during upgrade
			nonrolling ( )
			rolling ( )
		verifying the configuration ( )

	VLAN adapters
		cluster interconnect guidelines ( )
		public network guidelines ( )

	volume managers
		See also Solaris Volume Manager
		See also Solstice DiskSuite
		See also VERITAS Volume Manager (VxVM)
		partitions for ( )
		planning
			general ( )
			Solaris Volume Manager ( )
			Solstice DiskSuite ( )
			VERITAS Volume Manager ( )

	volumes
		Solaris Volume Manager
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )
		VxVM
			configuring ( )
			verifying ( )

	VxFS, See VERITAS File System (VxFS)

	`vxio` driver major number
		non-VxVM nodes ( )
		VxVM–installed nodes ( )

	VxVM, See VERITAS Volume Manager (VxVM)


X

	`xntpd.cluster` command, starting NTP ( )

	`xntpd` command
		starting NTP ( )
		stopping NTP ( )

下一页: Book Information