以下に含まれる
その他のドキュメント
サポート リソース
|  PDF 文書ファイルをダウンロードする (3009 KB)
| | | |
| Numbers and Symbols |
|
| /export/home directory (  ) |
|
| 1394 (FireWire) support, description ( ) |
|
| 4.3 Tahoe file system ( ) |
|
| 9660 CD format ( ) |
| | | |
| A |
|
| accessing |
| | disk devices ( ) |
| | iSCSI disks (how to) ( ) |
| | removable media (how to) ( ) |
| | tape devices ( ) |
|
| adding |
| | a disk (overview) |
| | | SPARC ( ) |
| | | x86 ( ) |
| | a SCSI device to a SCSI bus (how to) ( ) |
| | a USB camera (how to) ( ) |
| | a USB mass storage device without vold running (how to) ( ) |
| | adding a new removable media drive (how to) ( ) |
| | entry to /etc/vfstab file (how to) ( ) |
| | PCI adapter card (how to) ( ) |
| | swap to vfstab ( ) |
| | USB audio devices (how to) ( ) |
| | VPPA communication service (how to) ( ) |
|
| allocated inodes ( ) |
|
| archiving, files to multiple diskettes with cpio command (how to) ( ) |
|
| autoconfiguration process ( ) |
|
| autofs ( ) |
|
| automounting, and /home ( ) |
| | | |
| B |
|
| backing up |
| | and restoring file systems |
| | | commands for ( ) |
| | | definition ( ) |
| | choosing file systems to ( ) |
| | full and incremental, definition ( ) |
| | preparing for (overview) ( ) |
| | reasons for ( ) |
| | types of ( ) |
|
| backup |
| | device names ( ) |
| | record of incremental ( ) |
|
| backup schedules |
| | daily cumulative, weekly cumulative backups ( ) |
| | daily cumulative, weekly incremental backups ( ) |
| | daily incremental, weekly cumulative backups ( ) |
| | examples ( ) ( ) |
| | for a server ( ) |
| | guidelines ( ) |
| | guidelines for ( ) |
| | using dump levels for ( ) |
|
| bad block numbers ( ) |
|
| bad inode number ( ) |
|
| bad superblock ( ) |
|
| block disk device interface |
| | definition ( ) |
| | when to use ( ) |
|
| blocks |
| | bad ( ) |
| | boot ( ) |
| | data ( ) |
| | directory data ( ) |
| | duplicate ( ) |
| | free ( ) |
| | indirect ( ) |
| | logical size ( ) |
| | regular data ( ) |
| | special inodes ( ) |
|
| boot block ( ) |
|
| BSD Fat Fast File system ( ) |
|
| bus-oriented disk controllers ( ) ( ) |
|
| bytes (number per inode) ( ) |
| | | |
| C |
|
| CacheFS file systems |
| | (overview) ( ) |
| | checking with fsck command (example of) ( ) |
| | collecting CacheFS statistics (overview) ( ) |
| | creating (how to) ( ) |
| | creating a packing list (how to) ( ) |
| | deleting (how to) ( ) |
| | displaying information about (how to) ( ) |
| | displaying packed files (example of) ( ) |
| | displaying packed files (how to) ( ) |
| | locating CacheFS log file ( ) |
| | mounting (how to) ( ) |
| | packing with cachefspack command (how to) ( ) |
| | packing with cachefspack command (overview) ( ) |
| | parameters ( ) |
| | setting up CacheFS logging (how to) ( ) |
| | stopping CacheFS logging ( ) |
| | troubleshooting cachefspack errors ( ) |
| | viewing CacheFS statistics ( ) |
|
| cachefspack command |
| | how to use ( ) |
| | overview ( ) |
|
| causes of file system damage ( ) |
|
| cdrw command |
| | description ( ) |
| | restricting access to (how to) ( ) |
| | writing data CDs and DVDs and audio CDs (overview) ( ) |
|
| CDs |
| | ISO 9660 format ( ) |
| | names ( ) |
| | UFS CDs |
| | | SPARC vs. x86 format ( ) |
|
| cfgadm |
| | PCI hot-plugging (overview) ( ) |
| | SCSI hot-plugging (overview) ( ) |
|
| cfsadmin command ( ) ( ) |
|
| changing, primary USB audio device (how to) ( ) |
|
| character special inodes ( ) |
|
| checking |
| | a file system on removable media (how to) ( ) |
| | and repairing file systems ( ) |
| | CacheFS file systems (example of) ( ) |
| | file system size ( ) |
| | format and type of inodes ( ) |
| | free blocks ( ) |
| | free inodes ( ) |
| | inode list for consistency ( ) |
|
| clri command ( ) |
|
| collecting, CacheFS statistics (overview) ( ) |
|
| configuring |
| | a SCSI controller (how to) ( ) |
| | a SCSI device (how to) ( ) |
| | a USB device (how to) ( ) |
| | IB Port, HCA_SVC, or a VPPA device (how to) ( ) |
| | IB pseudo device (how to) ( ) |
| | IOC device (how to) ( ) |
| | iSCSI target discovery (how to) ( ) |
| | unidirectional or bidirectional CHAP authentication for iSCSI (how to) ( ) |
|
| connecting |
| | a SCSI controller (how to) ( ) |
| | a USB device, logically (how to) ( ) |
|
| copying |
| | complete file systems (dd) ( ) |
| | directories between file systems with cpio command (overview) ( ) |
| | files to diskette (overview) ( ) |
| | groups of files with cpio command (overview) ( ) |
| | individual files with cpio command (overview) ( ) |
|
| cpio command |
| | (overview) ( ) |
| | copying directories between file systems (how to) ( ) |
| | extract all files from tape (how to) ( ) |
| | listing files on tape (how to) ( ) |
|
| creating |
| | a data CD or DVD file system (how to) ( ) |
| | a file system on a DVD-RAM (how to) ( ) |
| | a file system on a USB mass storage device (how to) ( ) |
| | a file system on removable media (how to) ( ) |
| | a full backup of UFS snapshot information (how to) ( ) |
| | a packing list (how to) ( ) |
| | a UFS snapshot |
| | | (example of) ( ) |
| | a UFS snapshot (how to) ( ) |
| | file systems (overview) ( ) |
| | loopback file system (overview) ( ) |
| | swap file ( ) |
|
| CTFS file system ( ) |
|
| custom parameters for file systems ( ) |
|
| cylinder group ( ) |
| | | |
| D |
|
| daily discrete backups ( ) |
|
| damage to file systems ( ) |
|
| data block ( ) ( ) |
|
| data directory blocks ( ) |
|
| datadm command ( ) |
|
| dd command |
| | (overview) ( ) |
| | cloning disks (how to) ( ) |
|
| default |
| | file system for /tmp (TMPFS) ( ) |
| | SunOS file system ( ) |
|
| deleting |
| | CacheFS file systems (how to) ( ) |
| | UFS snapshot information |
| | | (example of) ( ) |
|
| detecting end of media |
| | cpio command ( ) |
| | ufsdump command ( ) ( ) |
|
| determining |
| | file system types ( ) |
| | mounted file systems ( ) |
| | tape device name ( ) |
| | type of tape drive ( ) |
|
| /dev/dsk directory ( ) |
|
| /dev/rdsk directory ( ) |
|
| devfsadm command ( ) |
|
| device driver |
| | adding ( ) |
| | definition ( ) |
|
| device names |
| | backup ( ) |
| | finding a file system name ( ) |
| | finding tape ( ) |
|
| devices, accessing ( ) |
|
| df command ( ) ( ) |
|
| dfstab file, configuring for shared local removable media (how to) ( ) |
|
| direct I/O ( ) |
|
| directories |
| | copying between file systems with cpio command (overview) ( ) |
| | inodes ( ) |
| | /proc ( ) |
| | /tmp ( ) |
| | unallocated blocks ( ) |
|
| disabling |
| | removable media services ( ) |
| | removable media services (how to) ( ) |
| | write protection on removable media (how to) ( ) |
|
| disconnect, a USB device, logically (how to) ( ) |
|
| disconnecting |
| | a SCSI controller (how to) ( ) |
| | a USB device subtree, logically (how to) ( ) |
|
| disk |
| | adding to a (overview) |
| | | x86 ( ) |
| | automatic configuration of SCSI drives ( ) |
| | formatting a (overview) ( ) |
| | repairing defective sectors ( ) ( ) |
| | when to format (overview) ( ) |
|
| disk-based file systems ( ) |
|
| disk controllers ( ) |
|
| disk label |
| | creating (overview) ( ) |
| | description ( ) |
|
| disk slices |
| | definition ( ) |
| | determining which slices to use ( ) |
| | displaying information about (overview) ( ) |
| | requirements for system configurations ( ) |
|
| diskettes |
| | archiving files to multiple with cpio command (how to) ( ) |
| | creating a file system on (how to) ( ) |
| | formatting with rmformat (how to) ( ) |
| | loading with volume management (how to) ( ) |
|
| disks |
| | adding to a (overview) |
| | | SPARC ( ) |
| | connecting a secondary disk (example of) |
| | | SPARC ( ) |
| | creating disk slices and labeling a disk (example of) |
| | | SPARC ( ) |
| | creating disk slices and labeling a disk (how to) |
| | | SPARC ( ) |
| | determining if formatted (how to) ( ) |
| | recovering a corrupted disk label (how to) ( ) |
| | recovering a corrupted disk label (overview) ( ) |
|
| displaying |
| | disk slice information (overview) ( ) |
| | IB communication services (how to) ( ) |
| | InfiniBand device information (how to) ( ) |
| | information about SCSI devices ( ) |
| | kernel IB clients of an HCA (how to) ( ) |
| | packed files (example of) ( ) |
| | packed files (how to) ( ) |
| | PCI slot configuration information (how to) ( ) |
| | removable media user (how to) ( ) |
| | swap space ( ) |
| | system configuration information ( ) ( ) |
| | USB bus information (how to) ( ) |
| | USB device information (how to) ( ) |
|
| DOS, file system ( ) |
|
| driver not attached message ( ) |
|
| dump levels |
| | daily, incremental backups ( ) |
| | definition ( ) |
|
| duplicate blocks ( ) |
|
| DVD-RAM, creating a file system on (how to) ( ) |
|
| DVD-ROM ( ) |
|
| dynamic reconfiguration, InfiniBand devices ( ) |
|
| dynamic reconfiguration (overview) ( ) |
| | | |
| E |
|
| EFI label |
| | (overview) ( ) |
| | comparison with VTOC label ( ) |
| | installing a system with ( ) |
| | restrictions of ( ) |
| | troubleshooting problems ( ) |
|
| eject command, removable media (how to) ( ) |
|
| ejecting, removable media (how to) ( ) |
|
| enabling |
| | removable media services (how to) ( ) |
| | uDAPL ( ) |
| | write protection on removable media (how to) ( ) |
|
| end-of-media detection |
| | cpio command ( ) |
| | ufsdump command ( ) ( ) |
|
| error messages, iSCSI ( ) |
|
| /etc/dfs/dfstab file, configuring for shared removable media (how to) ( ) |
|
| /etc/dumpdates file ( ) |
|
| extended fundamental types (UFS file system) ( ) |
| | | |
| F |
|
| FDFS file system ( ) |
|
| ff command ( ) |
|
| FIFO inodes ( ) |
|
| FIFOFS file system ( ) |
|
| file system name ( ) |
|
| file system table, virtual ( ) |
|
| file systems |
| | / ( ) |
| | 4.3 Tahoe ( ) |
| | BSD Fat Fast ( ) |
| | cached (overview) ( ) |
| | checking and repairing ( ) |
| | checking size ( ) |
| | copying complete (dd) ( ) |
| | creating (overview) |
| | | loopback (LOFS) ( ) |
| | CTFS ( ) |
| | custom parameters ( ) |
| | cylinder group structure ( ) |
| | damage to ( ) |
| | default SunOS ( ) |
| | description of administration commands ( ) |
| | disk-based ( ) |
| | DOS ( ) |
| | /export/home ( ) |
| | FDFS ( ) |
| | FIFOFS ( ) |
| | finding types ( ) |
| | fixing ( ) |
| | High Sierra ( ) |
| | ISO 9660 ( ) |
| | large ( ) |
| | making available (overview) ( ) |
| | manual pages for ( ) |
| | MNTFS ( ) |
| | mount table ( ) |
| | NAMEFS ( ) |
| | network-based ( ) |
| | OBJFS ( ) |
| | /opt ( ) |
| | PCFS ( ) |
| | preening ( ) ( ) |
| | /proc ( ) |
| | process, (overview) ( ) |
| | PROCFS, (overview) ( ) |
| | pseudo, (overview) ( ) |
| | reasons for inconsistencies ( ) |
| | SHAREFS ( ) |
| | sharing ( ) |
| | SPECFS ( ) |
| | stopping all processes accessing (how to) ( ) |
| | SWAPFS ( ) |
| | TMPFS ( ) |
| | types of ( ) |
| | UFS ( ) |
| | UNIX ( ) |
| | /usr ( ) |
| | /var ( ) |
| | which to back up ( ) |
| | why you back up ( ) |
|
| files |
| | archiving to multiple diskettes with cpio command (how to) ( ) |
| | commands for copying to media (overview) ( ) |
| | /etc/default/fs ( ) |
| | /etc/dfs/fstypes ( ) |
| | in the /proc directory ( ) |
| | retrieving from tape with tar command (how to) ( ) |
| | sharing ( ) |
|
| finding |
| | file system name ( ) |
| | tape device name ( ) |
| | type of file system ( ) |
|
| fixing inconsistent file systems ( ) |
|
| format.dat file |
| | creating an entry (how to) ( ) |
| | creating an entry (overview) ( ) |
| | keywords ( ) ( ) |
| | syntax rules ( ) |
|
| format of inodes ( ) |
|
| format utility |
| | (overview) ( ) |
| | analyze menu ( ) |
| | automatic configuration of SCSI disk drives (how to) ( ) |
| | automatic configuration of SCSI disk drives (overview) ( ) |
| | creating a Solaris fdisk partition (how to) ( ) |
| | creating disk slices and labeling disk (how to) |
| | | SPARC ( ) |
| | | x86 ( ) |
| | defect menu ( ) |
| | determining if a disk is formatted (how to) ( ) |
| | displaying disk slice information (example of) ( ) |
| | entering command names (how to) ( ) |
| | fdisk menu ( ) |
| | features and benefits ( ) |
| | formatting a disk (example of) ( ) |
| | guidelines for using ( ) |
| | identifying disks on a system (examples of) ( ) |
| | identifying disks on a system (how to) ( ) |
| | input to ( ) ( ) |
| | labeling a disk |
| | | example of ( ) |
| | main menu ( ) ( ) |
| | partition menu ( ) ( ) |
| | recovering corrupted disk label (how to) ( ) |
| | specifying block numbers (how to) ( ) |
| | using help facility ( ) |
| | when to use ( ) |
|
| formatting |
| | a USB mass storage device without vold running (how to) ( ) |
| | diskettes with rmformat (how to) ( ) |
|
| formatting a disk, (overview) ( ) |
|
| fragment size ( ) |
|
| free blocks ( ) ( ) |
|
| free hog slice, See donor slice |
|
| free inodes ( ) |
|
| free space (minimum) ( ) |
|
| fsck command ( ) ( ) |
| | checking |
| | | free blocks ( ) |
| | | free inodes ( ) |
| | | inode list size ( ) |
| | | superblock ( ) |
| | conditions to repair ( ) |
| | FSACTIVE state flag ( ) |
| | FSBAD state flag ( ) |
| | FSCLEAN state flag ( ) |
| | FSSTABLE state flag ( ) |
| | preening ( ) |
| | state flags ( ) |
| | syntax and options ( ) |
| | using interactively ( ) |
|
| fsdb command ( ) |
|
| fssnap command, creating a UFS snapshot (how to) ( ) |
|
| fsstat command, description ( ) |
|
| fsstat command (examples of) ( ) |
|
| fstyp command ( ) |
|
| fstypes file ( ) |
|
| full backup |
| | (example of) ( ) ( ) |
| | definition ( ) |
|
| fuser command |
| | finding if removable media is in use (how to) ( ) |
| | killing processes accessing removable media (how to) ( ) |
| | | |
| G |
|
| grep command ( ) |
|
| GRUB |
| | managing disks with GRUB |
| | | x86 ( ) |
| | Solaris failsafe boot |
| | | x86 ( ) |
| | | |
| H |
|
| High Sierra file system ( ) |
|
| /home (automounted) ( ) |
|
| hot-plugging |
| | (overview) ( ) |
| | adding a SCSI device to a SCSI bus (how to) ( ) |
| | adding PCI adapter card (how to) ( ) |
| | configuring a SCSI controller (how to) ( ) |
| | configuring a SCSI device (how to) ( ) |
| | configuring a USB device (how to) ( ) |
| | connecting a SCSI controller (how to) ( ) |
| | disconnecting a SCSI controller with cfgadm command (how to) ( ) |
| | logically connecting a USB device (how to) ( ) |
| | logically disconnecting a USB device (how to) ( ) |
| | logically disconnecting a USB device subtree (how to) ( ) |
| | PCI devices (overview) ( ) |
| | removing a SCSI device (how to) ( ) |
| | removing PCI adapter card (how to) ( ) |
| | replacing an identical SCSI device on a SCSI controller (how to) ( ) |
| | unconfiguring a SCSI device (how to) ( ) |
| | unconfiguring a USB device (how to) ( ) |
|
| HSFS, See High Sierra file system |
| | | |
| I |
|
| I/O, direct ( ) |
|
| identifying |
| | devices ( ) |
| | disks on a system (how to) ( ) |
| | primary USB audio device (how to) ( ) |
|
| inconsistencies in file systems ( ) |
|
| incorrect . and .. entries ( ) |
|
| incremental backup ( ) ( ) |
| | (example of) ( ) |
|
| indirect blocks ( ) |
|
| InfiniBand devices |
| | adding a VPPA communication service (how to) ( ) |
| | configuring an IB Port, HCA_SVC, or a VPPA device (how to) ( ) |
| | configuring an IB pseudo device (how to) ( ) |
| | configuring an IOC device (how to) ( ) |
| | displaying (how to) ( ) |
| | displaying IB communication services (how to) ( ) |
| | displaying kernel IB clients of an HCA (how to) ( ) |
| | dynamic reconfiguration (overview) ( ) |
| | overview ( ) |
| | removing an existing IB port, HCA_SVC, or a VPPA communication service (how to) ( ) |
| | unconfiguring an IB Port, HCA_SVC, or a VPPA (how to) ( ) |
| | unconfiguring an IB pseudo device (how to) ( ) |
| | unconfiguring an IOC device (how to) ( ) |
| | unconfiguring IB devices connected an HCA (how to) ( ) |
| | updating an IOC configuration (how to) ( ) |
| | updating the IP p_key tables (how to) ( ) |
|
| inode list size ( ) |
|
| inode states ( ) |
|
| inodes ( ) |
| | bad number ( ) |
| | block special ( ) |
| | character special ( ) |
| | checking format and type ( ) |
| | directory ( ) |
| | FIFO ( ) |
| | link count ( ) |
| | number of bytes per ( ) |
| | regular ( ) |
| | size ( ) |
| | symbolic link ( ) |
|
| installboot command ( ) |
|
| installgrub command ( ) |
|
| installing a boot block (how to), SPARC ( ) |
|
| iSCSI |
| | (overview) ( ) |
| | accessing iSCSI disks (how to) ( ) |
| | configuring iSCSI target discovery (how to) ( ) |
| | configuring unidirectional or bidirectional CHAP authentication for (how to) ( ) |
| | general iSCSI error messages ( ) |
| | modifying iSCSI initiator and target parameters (how to) ( ) |
| | monitoring your iSCSI configuration (how to) ( ) |
| | preparing for a Solaris iSCSI configuration (how to) ( ) |
| | removing discovered iSCSI targets (how to) ( ) |
| | software and hardware requirements ( ) |
| | static and dynamic target discovery ( ) |
| | troubleshooting iSCSI configuration problems (how to) ( ) |
|
| iscsiadm add command, adding static or dynamic targets (example of) ( ) |
|
| iscsiadm list, displaying ISCSI configuration information (example of) ( ) |
|
| iscsiadm modify command |
| | enabling CHAP (example of) ( ) |
| | enabling or disabling static or dynamic targets (example of) ( ) |
|
| iscsiadm remove command, removing static or dynamic targets (example of) ( ) |
|
| ISO 9660 file system ( ) |
|
| ISO standards, 9660 CD format ( ) |
| | | |
| K |
|
| /kernel/drv directory ( ) |
|
| killing |
| | all processes accessing a file system (how to) ( ) |
| | processes accessing removable media (how to) ( ) |
| | | |
| L |
|
| labelit command ( ) |
|
| large files option ( ) |
|
| level 0 backup ( ) |
|
| link count of inodes ( ) |
|
| loading, diskettes(how to) ( ) |
|
| locating, CacheFS log file ( ) |
|
| log (record of dumps) ( ) |
|
| logical block size ( ) |
|
| logical device name |
| | definition ( ) |
| | disk ( ) |
| | tape ( ) |
|
| logical device names, removable media ( ) |
|
| loopback file system (LOFS) |
| | creating (overview) ( ) |
| | mounting ( ) |
|
| lost+found directory ( ) |
| | | |
| M |
|
| maintaining tape drives ( ) |
|
| managing |
| | disks with GRUB |
| | | x86 ( ) |
|
| manual pages, for file systems ( ) |
|
| media was found message ( ) |
|
| memory storage (virtual), definition ( ) |
|
| minimum free space ( ) |
|
| mkfile command ( ) ( ) |
|
| mkfs command ( ) ( ) |
|
| mkisofs command, create a data CD or DVD file system (how to) ( ) |
|
| MNTFS file system ( ) |
|
| mnttab file ( ) |
|
| modifying, iSCSI initiator and target parameters (how to) ( ) |
|
| monitoring, your iSCSI configuration (how to) ( ) |
|
| mount command ( ) |
|
| mount point, definition ( ) |
|
| mount table ( ) |
|
| mountall command ( ) |
|
| mounting |
| | a file system with /etc/vfstab ( ) |
| | a USB mass storage device without vold running (how to) ( ) |
| | all files in vfstab file ( ) |
| | file systems automatically ( ) |
| | loopback file systems (LOFS) ( ) |
| | NFS file systems ( ) |
| | remote removable media manually (example of) ( ) ( ) |
| | removable media |
| | | automatic mounting compared to ( ) ( ) |
| | UFS file systems ( ) |
| | UFS file systems (how to) |
| | | without large files ( ) |
|
| mt command ( ) |
| | | |
| N |
|
| NAMEFS file system ( ) |
|
| ncheck command ( ) |
|
| network-based file systems ( ) |
|
| newfs command ( ) ( ) |
|
| NFS |
| | description ( ) |
| | server description ( ) |
| | vfstab entry for ( ) |
|
| nfsd daemon |
| | starting ( ) |
| | verifying if running ( ) |
|
| no media was found message ( ) |
| | | |
| O |
|
| OBJFS file system ( ) |
|
| /opt directory ( ) |
|
| options, for ufsdump command ( ) |
| | | |
| P |
|
| parameters (file system) ( ) |
|
| partition (swap), definition ( ) |
|
| passwd file, restoring from tape (example of) ( ) |
|
| PCFS file system ( ) |
|
| PCI devices |
| | adding PCI adapter card (how to) ( ) |
| | displaying PCI slot configuration information (how to) ( ) |
| | removing PCI adapter card (how to) ( ) |
| | troubleshooting PCI configuration problems ( ) |
|
| PCI Express (PCIe) support, description ( ) |
|
| physical device name |
| | definition ( ) ( ) |
|
| power management of devices, description ( ) |
|
| preening file systems ( ) ( ) |
|
| preparing |
| | for backing up (overview) ( ) |
| | to restore files (overview) ( ) |
|
| preparing for, Solaris iSCSI configuration (how to) ( ) |
|
| /proc directory ( ) ( ) |
|
| process file system (PROCFS) ( ) |
|
| PROCFS file system, (overview) ( ) |
|
| prtvtoc command ( ) |
| | (example of) ( ) |
|
| pseudo file systems, (overview) ( ) |
| | | |
| R |
|
| raw disk device interface ( ) ( ) |
|
| RCM script |
| | commands for ( ) |
| | overview ( ) |
|
| reconfiguration boot ( ) |
| | SPARC example ( ) |
| | x86 example ( ) |
|
| record of |
| | dumps ( ) |
| | incremental backup ( ) |
|
| registering, service provider in the DAT static registry (how to) ( ) |
|
| regular inodes ( ) |
|
| removable media |
| | accessing (examples of) ( ) |
| | accessing (how to) ( ) |
| | accessing media on other systems (example of) ( ) ( ) |
| | adding a new removable media drive (how to) ( ) |
| | checking a file system on (how to) ( ) |
| | creating a file system on (how to) ( ) |
| | creating a file system on a DVD-RAM (how to) ( ) |
| | disabling or enabling removable media services (how to) ( ) |
| | ejecting (how to) ( ) |
| | enabling write protection on (how to) ( ) |
| | finding out if media is in use (how to) ( ) |
| | formatting diskettes with rmformat (how to) ( ) |
| | killing processes accessing (how to) ( ) |
| | loading diskettes (how to) ( ) |
| | management, benefits ( ) |
| | mounting |
| | | manual compared to automatic ( ) ( ) |
| | mounting remote media (example of) ( ) ( ) |
| | names ( ) |
| | repairing bad blocks on removable media (how to) ( ) |
| | services, disabling ( ) |
|
| removing |
| | a SCSI device (how to) ( ) |
| | a swap file from use ( ) |
| | a USB mass storage device without vold running (how to) ( ) |
| | discovered iSCSI targets (how to) ( ) |
| | existing IB port, HCA_SVC, or a VPPA communication service (how to) ( ) |
| | PCI adapter card (how to) ( ) |
|
| repairing, bad blocks on removable media (how to) ( ) |
|
| replacing, an identical SCSI device on a SCSI controller (how to) ( ) |
|
| resetting, a USB device (how to) ( ) |
|
| resolving, a failed SCSI unconfigure operation (how to) ( ) |
|
| restoring bad superblock ( ) |
|
| restoring file systems |
| | complete (example of) ( ) |
| | complete (how to) ( ) |
| | determining which tapes to use (how to) ( ) |
| | preparing to (overview) ( ) |
| | root and /usr (SPARC) (example of) ( ) |
| | root or /usr (x86) (example of) ( ) |
| | type of tape drive ( ) |
|
| restoring files |
| | interactive restore (example of) ( ) |
| | non-interactive restore (example of) ( ) |
|
| restricting, removable media access (how to) ( ) |
|
| retrieving, files from tape with tar command (how to) ( ) |
|
| Rock Ridge extension (HSFS file system) ( ) |
|
| root (/) file system ( ) |
| | | |
| S |
|
| scheduling backups ( ) |
|
| SCSI devices |
| | adding a SCSI device to a SCSI bus (how to) ( ) |
| | configuring a SCSI controller (how to) ( ) |
| | configuring a SCSI device (how to) ( ) |
| | connecting a SCSI controller (how to) ( ) |
| | disconnecting with cfgadm command (how to) ( ) |
| | displaying information about (how to) ( ) |
| | removing a SCSI device (how to) ( ) |
| | replacing an identical SCSI device on a SCSI controller (how to) ( ) |
| | resolving a failed SCSI unconfigure operation (how to) ( ) |
| | troubleshooting SCSI configuration problem ( ) |
| | unconfiguring a SCSI controller (how to) ( ) |
|
| SCSI disk drives ( ) |
|
| SCSI tape drives ( ) |
|
| secondary disk |
| | connecting to the system (how to) |
| | | SPARC ( ) |
| | | x86 ( ) |
| | description ( ) |
|
| setting up, CacheFS logging ( ) |
|
| share command ( ) |
| | making removable media available to other systems (how to) ( ) |
|
| shareall command ( ) |
|
| SHAREFS file system ( ) |
|
| sharing, files ( ) |
|
| size |
| | checking file system ( ) |
| | fragment ( ) |
| | inode ( ) |
|
| slice (definition) ( ) |
|
| Solaris failsafe boot |
| | (how to) |
| | | x86 ( ) |
| | x86 ( ) |
|
| Solaris fdisk partition, guidelines ( ) |
|
| space optimization type ( ) |
|
| SPARC based systems, UFS format ( ) |
|
| SPECFS file system ( ) |
|
| specifying a disk slice ( ) |
|
| starting, nfsd daemon ( ) |
|
| state flag |
| | fsck ( ) |
| | UFS file systems ( ) |
|
| stopping |
| | all processes for a file system (how to) ( ) |
| | CacheFS logging ( ) |
| | killing processes accessing removable media (how to) ( ) |
|
| storage (virtual memory), definition ( ) |
|
| storage capacities (media) ( ) ( ) |
|
| structure of cylinder groups ( ) |
|
| SunOS default file system ( ) |
|
| superblock ( ) ( ) ( ) |
|
| svcadm disable, (example of) ( ) |
|
| swap command ( ) |
|
| swap file |
| | adding to vfstab ( ) |
| | creating ( ) |
| | displaying ( ) |
| | removing from use ( ) |
|
| swap partition, definition ( ) |
|
| swapadd command ( ) |
|
| SWAPFS file system ( ) |
|
| symbolic links ( ) |
|
| syntax, fsck command ( ) |
|
| sysdef command ( ) |
|
| system disk |
| | connecting (how to) |
| | | x86 ( ) |
| | description ( ) |
| | | |
| T |
|
| tape |
| | capacity ( ) |
| | characteristics ( ) |
| | retrieving files from with tar command (how to) ( ) |
| | sizes ( ) ( ) |
| | storage capacities ( ) ( ) |
|
| tape devices (naming) ( ) |
|
| tape drive |
| | determining type for restore ( ) |
| | maintaining ( ) |
| | maximum SCSI ( ) |
| | rewind ( ) |
|
| tar command |
| | (overview) ( ) |
| | copying files to remote tape with dd command (how to) ( ) |
| | listing files on diskette (how to) ( ) |
| | listing files on tape (how to) ( ) |
| | retrieving files from diskette (how to) ( ) |
| | retrieving files from remote tape with dd command (how to) ( ) |
| | retrieving files from tape (how to) ( ) |
|
| temporary file system (TMPFS), overview ( ) |
|
| time (optimization type) ( ) |
|
| /tmp directory ( ) ( ) |
|
| TMPFS file system, overview ( ) |
|
| troubleshooting |
| | a failed SCSI unconfigure operation ( ) |
| | cachefspack errors ( ) |
| | EFI disk labels ( ) |
| | iSCSI configuration problems (how to) ( ) |
| | PCI configuration problems ( ) |
| | SCSI configuration problems ( ) |
| | USB audio device problems ( ) |
| | USB mass storage devices ( ) |
|
| type of file systems ( ) |
|
| type of inodes ( ) |
| | | |
| U |
|
| uDAPL |
| | (overview) ( ) |
| | enabling (how to) ( ) |
| | registering a service provider in the DAT static registry (how to) ( ) |
| | unregistering a service provider in the DAT static registry (how to) ( ) |
| | updating the DAT static registry (how to) ( ) |
|
| UDF file system ( ) |
|
| UFS CDs, SPARC compared to x86 formats ( ) |
|
| UFS file system ( ) ( ) |
| | extended fundamental types ( ) |
| | large file systems ( ) |
| | logging ( ) |
| | mounting ( ) |
| | mounting with /etc/vfstab ( ) |
| | mounting without large files (how to) ( ) |
| | multiterabyte file systems ( ) |
| | state flags ( ) |
|
| UFS logging, overview ( ) |
|
| UFS snapshot |
| | creating (how to) ( ) |
| | creating a full backup of (how to) ( ) |
| | description ( ) |
|
| ufsdump command |
| | end-of-media detection ( ) |
| | full backup (example of) ( ) ( ) |
| | how data is copied with ( ) |
| | how it works ( ) |
| | incremental backup (example of) ( ) |
| | limitations ( ) |
| | options and arguments ( ) |
|
| ufsdump command (overview) ( ) |
|
| ufsrestore command ( ) |
| | determining which tapes to use (how to) ( ) |
| | preparing to use (overview) ( ) |
|
| umount command ( ) |
|
| umountall command ( ) |
|
| unallocated directory blocks ( ) |
|
| unallocated inodes ( ) |
|
| unconfiguring |
| | a SCSI controller (how to) ( ) |
| | a USB device (how to) ( ) |
| | IB devices connected an HCA (how to) ( ) |
| | IB Port, HCA_SVC, or a VPPA Device (how to) ( ) |
| | IB pseudo device (how to) ( ) |
| | IOC device (how to) ( ) |
|
| UNIX file system ( ) |
|
| unmounting, a USB mass storage device without vold running (how to) ( ) |
|
| unregistering, service provider in the DAT static registry (how to) ( ) |
|
| unsupported devices ( ) |
|
| updating |
| | DAT static registry (how to) ( ) |
| | IOC configuration (how to) ( ) |
| | IP p_key tables (how to) ( ) |
|
| USB devices |
| | (overview) ( ) |
| | acronyms ( ) |
| | adding a mass storage device without vold running (how to) ( ) |
| | adding a USB camera (how to) ( ) |
| | adding audio devices (how to) ( ) |
| | audio |
| | | (overview) ( ) |
| | | changing the primary device (how to) ( ) |
| | | device ownership ( ) |
| | bus description ( ) |
| | bus-powered devices ( ) |
| | cables for ( ) |
| | CDC ACM device support ( ) |
| | composite device ( ) |
| | compound device ( ) |
| | configuring a USB device (how to) ( ) |
| | connect a USB device (how to) ( ) |
| | creating a file system on a mass storage device (how to) ( ) |
| | device classes ( ) |
| | device nodes ( ) |
| | diskette devices (overview) ( ) |
| | displaying bus information (how to) ( ) |
| | displaying USB device information (how to) ( ) |
| | drivers ( ) |
| | EHCI, OHCI, and UHCI support ( ) |
| | formatting a mass storage device without vold running (how to) ( ) |
| | host controller and root hub ( ) |
| | hot-plugging (overview) ( ) |
| | hotpluggable attribute ( ) |
| | identifying primary audio device (how to) ( ) |
| | keyboards and mouse devices ( ) |
| | logically disconnecting a USB device (how to) ( ) |
| | logically disconnecting a USB device subtree (how to) ( ) |
| | mounting mass storage without vold running (how to) ( ) |
| | names of ( ) |
| | overview of 2.0 devices ( ) |
| | physical device hierarchy ( ) |
| | power budgeting support ( ) |
| | power management ( ) |
| | Prolific and Keyspan serial adapter support ( ) |
| | removable mass storage (overview) ( ) |
| | removing a mass storage device without vold running (how to) ( ) |
| | resetting a USB device (how to) ( ) |
| | Solaris USB Architecture (USBA) ( ) |
| | support for ZFS file systems ( ) |
| | troubleshooting audio device problems ( ) |
| | troubleshooting tips for mass storage devices ( ) |
| | unconfiguring a device (how to) ( ) |
| | unmounting mass storage without vold running (how to) ( ) |
| | USB 2.0 support ( ) |
| | using non-compliant mass storage devices (overview) ( ) |
| | virtual keyboard and mouse support ( ) |
| | wheel mouse support ( ) |
|
| /usr file system ( ) |
| | | |
| V |
|
| /var directory ( ) |
|
| verifying, nfsd daemon is running ( ) |
|
| vfstab file ( ) ( ) |
| | adding entries to (how to) ( ) |
| | adding swap to ( ) |
| | default ( ) |
| | entry for LOFS ( ) |
| | mounting all files ( ) |
|
| viewing, CacheFS statistics ( ) |
|
| virtual file system table ( ) |
|
| virtual memory storage, definition ( ) |
|
| volcopy command ( ) |
| | | |
| W |
|
| writing, data CDs and DVDs and audio CDs (overview) ( ) |
| | | |
| X |
|
| x86 based systems, UFS format ( ) |
|
