Scarica il manuale in formato PDF (1644 KB)

Curses Library Functions

•   A
  • addch(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • addch(3XCURSES) – add a character (with rendition) to a window
  • addchnstr(3CURSES) – add string of characters and attributes to a curses window
  • addchnstr(3XCURSES) – copy a character string (with renditions) to a window
  • addchstr(3CURSES) – add string of characters and attributes to a curses window
  • addchstr(3XCURSES) – copy a character string (with renditions) to a window
  • addnstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • addnstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • addnwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • addnwstr(3XCURSES) – add a wide-character string to a window
  • addstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • addstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • addwch(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • add_wch(3XCURSES) – add a complex character (with rendition) to a window
  • addwchnstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • add_wchnstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • addwchstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • add_wchstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • addwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • addwstr(3XCURSES) – add a wide-character string to a window
  • adjcurspos(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • arc(3PLOT) – graphics interface
  • attr_get(3XCURSES) – control window attributes
  • attroff(3CURSES) – curses character and window attribute control routines
  • attr_off(3XCURSES) – control window attributes
  • attroff(3XCURSES) – change foreground window attributes
  • attron(3CURSES) – curses character and window attribute control routines
  • attr_on(3XCURSES) – control window attributes
  • attron(3XCURSES) – change foreground window attributes
  • attrset(3CURSES) – curses character and window attribute control routines
  • attr_set(3XCURSES) – control window attributes
  • attrset(3XCURSES) – change foreground window attributes
•   B
  • baudrate(3CURSES) – curses environment query routines
  • baudrate(3XCURSES) – return terminal baud rate
  • beep(3CURSES) – curses bell and screen flash routines
  • beep(3XCURSES) – activate audio-visual alarm
  • bkgd(3CURSES) – curses window background manipulation routines
  • bkgd(3XCURSES) – set or get the background character (and rendition) of window
  • bkgdset(3CURSES) – curses window background manipulation routines
  • bkgdset(3XCURSES) – set or get the background character (and rendition) of window
  • bkgrnd(3XCURSES) – set or get the background character (and rendition) of window using a complex character
  • bkgrndset(3XCURSES) – set or get the background character (and rendition) of window using a complex character
  • border(3CURSES) – create curses borders, horizontal and vertical lines
  • border(3XCURSES) – add a single-byte border to a window
  • border_set(3XCURSES) – use complex characters (and renditions) to draw borders
  • bottom_panel(3CURSES) – panels deck manipulation routines
  • box(3CURSES) – create curses borders, horizontal and vertical lines
  • box(3PLOT) – graphics interface
  • box(3XCURSES) – add a single-byte border to a window
  • box_set(3XCURSES) – use complex characters (and renditions) to draw borders
•   C
  • can_change_color(3CURSES) – curses color manipulation functions
  • can_change_color(3XCURSES) – manipulate color information
  • cbreak(3CURSES) – curses terminal input option control routines
  • cbreak(3XCURSES) – set input mode controls
  • chgat(3XCURSES) – change the rendition of characters in a window
  • circle(3PLOT) – graphics interface
  • clear(3CURSES) – clear all or part of a curses window
  • clear(3XCURSES) – clear a window
  • clearok(3CURSES) – curses terminal output option control routines
  • clearok(3XCURSES) – terminal output control functions
  • closepl(3PLOT) – graphics interface
  • closevt(3PLOT) – graphics interface
  • clrtobot(3CURSES) – clear all or part of a curses window
  • clrtobot(3XCURSES) – clear to the end of a window
  • clrtoeol(3CURSES) – clear all or part of a curses window
  • clrtoeol(3XCURSES) – clear to the end of a line
  • color_content(3CURSES) – curses color manipulation functions
  • color_content(3XCURSES) – manipulate color information
  • COLOR_PAIR(3XCURSES) – manipulate color information
  • COLOR_PAIRS(3XCURSES) – manipulate color information
  • COLORS(3XCURSES) – manipulate color information
  • color_set(3XCURSES) – control window attributes
  • COLS(3XCURSES) – number of columns on terminal screen
  • cont(3PLOT) – graphics interface
  • copywin(3CURSES) – overlap and manipulate overlapped curses windows
  • copywin(3XCURSES) – overlay or overwrite any portion of window
  • current_field(3CURSES) – set forms current page and field
  • current_item(3CURSES) – set and get current menus items
  • curs_addch(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • curs_addchstr(3CURSES) – add string of characters and attributes to a curses window
  • curs_addstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • curs_addwch(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • curs_addwchstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • curs_addwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • curs_alecompat(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • curs_attr(3CURSES) – curses character and window attribute control routines
  • curs_beep(3CURSES) – curses bell and screen flash routines
  • curs_bkgd(3CURSES) – curses window background manipulation routines
  • curs_border(3CURSES) – create curses borders, horizontal and vertical lines
  • curs_clear(3CURSES) – clear all or part of a curses window
  • curs_color(3CURSES) – curses color manipulation functions
  • curscr(3XCURSES) – current window
  • curs_delch(3CURSES) – delete character under cursor in a curses window
  • curs_deleteln(3CURSES) – delete and insert lines in a curses window
  • curses(3CURSES) – CRT screen handling and optimization package
  • curses(3XCURSES) – introduction and overview of X/Open Curses
  • curs_getch(3CURSES) – get (or push back) characters from curses terminal keyboard
  • curs_getstr(3CURSES) – get character strings from curses terminal keyboard
  • curs_getwch(3CURSES) – get (or push back) wchar_t characters from curses terminal keyboard
  • curs_getwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • curs_getyx(3CURSES) – get curses cursor and window coordinates
  • curs_inch(3CURSES) – get a character and its attributes from a curses window
  • curs_inchstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • curs_initscr(3CURSES) – curses screen initialization and manipulation routines
  • curs_inopts(3CURSES) – curses terminal input option control routines
  • curs_insch(3CURSES) – insert a character before the character under the cursor in a curses window
  • curs_insstr(3CURSES) – insert string before character under the cursor in a curses window
  • curs_instr(3CURSES) – get a string of characters from a curses window
  • curs_inswch(3CURSES) – insert a wchar_t character before the character under the cursor in a curses window
  • curs_inswstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • curs_inwch(3CURSES) – get a wchar_t character and its attributes from a curses window
  • curs_inwchstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • curs_inwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • curs_kernel(3CURSES) – low-level curses routines
  • curs_move(3CURSES) – move curses window cursor
  • curs_outopts(3CURSES) – curses terminal output option control routines
  • curs_overlay(3CURSES) – overlap and manipulate overlapped curses windows
  • curs_pad(3CURSES) – create and display curses pads
  • curs_printw(3CURSES) – print formatted output in curses windows
  • curs_refresh(3CURSES) – refresh curses windows and lines
  • curs_scanw(3CURSES) – convert formatted input from a curses widow
  • curs_scr_dump(3CURSES) – read or write a curses screen from or to a file
  • curs_scroll(3CURSES) – scroll a curses window
  • curs_set(3CURSES) – low-level curses routines
  • curs_set(3XCURSES) – set visibility of cursor
  • curs_slk(3CURSES) – curses soft label routines
  • curs_termattrs(3CURSES) – curses environment query routines
  • curs_termcap(3CURSES) – curses interfaces (emulated) to the termcap library
  • curs_terminfo(3CURSES) – curses interfaces to terminfo database
  • curs_touch(3CURSES) – curses refresh control routines
  • curs_util(3CURSES) – curses miscellaneous utility routines
  • curs_window(3CURSES) – create curses windows
  • cur_term(3XCURSES) – current terminal information
•   D
  • data_ahead(3CURSES) – tell if forms field has off-screen data ahead or behind
  • data_behind(3CURSES) – tell if forms field has off-screen data ahead or behind
  • def_prog_mode(3CURSES) – low-level curses routines
  • def_prog_mode(3XCURSES) – save/restore terminal modes
  • def_shell_mode(3CURSES) – low-level curses routines
  • def_shell_mode(3XCURSES) – save/restore terminal modes
  • delay_output(3CURSES) – curses miscellaneous utility routines
  • delay_output(3XCURSES) – delays output
  • delch(3CURSES) – delete character under cursor in a curses window
  • delch(3XCURSES) – remove a character
  • del_curterm(3CURSES) – curses interfaces to terminfo database
  • del_curterm(3XCURSES) – interfaces to the terminfo database
  • deleteln(3CURSES) – delete and insert lines in a curses window
  • deleteln(3XCURSES) – remove a line
  • del_panel(3CURSES) – create and destroy panels
  • delscreen(3CURSES) – curses screen initialization and manipulation routines
  • delscreen(3XCURSES) – free space associated with the SCREEN data structure
  • delwin(3CURSES) – create curses windows
  • delwin(3XCURSES) – delete a window
  • derwin(3CURSES) – create curses windows
  • derwin(3XCURSES) – create a new window or subwindow
  • doupdate(3CURSES) – refresh curses windows and lines
  • doupdate(3XCURSES) – refresh windows and lines
  • dup_field(3CURSES) – create and destroy forms fields
  • dupwin(3CURSES) – create curses windows
  • dupwin(3XCURSES) – duplicate a window
  • dynamic_field_info(3CURSES) – get forms field characteristics
•   E
  • echo(3CURSES) – curses terminal input option control routines
  • echo(3XCURSES) – enable/disable terminal echo
  • echochar(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • echochar(3XCURSES) – add a single-byte character and refresh window
  • echowchar(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • echo_wchar(3XCURSES) – add a complex character and refresh window
  • endwin(3CURSES) – curses screen initialization and manipulation routines
  • endwin(3XCURSES) – restore initial terminal environment
  • erase(3CURSES) – clear all or part of a curses window
  • erase(3PLOT) – graphics interface
  • erase(3XCURSES) – clear a window
  • erasechar(3CURSES) – curses environment query routines
  • erasechar(3XCURSES) – return current ERASE or KILL characters
  • erasewchar(3XCURSES) – return current ERASE or KILL characters
•   F
  • field_arg(3CURSES) – forms field data type validation
  • field_back(3CURSES) – format the general display attributes of forms
  • field_buffer(3CURSES) – set and get forms field attributes
  • field_count(3CURSES) – connect fields to forms
  • field_fore(3CURSES) – format the general display attributes of forms
  • field_index(3CURSES) – set forms current page and field
  • field_info(3CURSES) – get forms field characteristics
  • field_init(3CURSES) – assign application-specific routines for invocation by forms
  • field_just(3CURSES) – format the general appearance of forms
  • field_opts(3CURSES) – forms field option routines
  • field_opts_off(3CURSES) – forms field option routines
  • field_opts_on(3CURSES) – forms field option routines
  • field_pad(3CURSES) – format the general display attributes of forms
  • field_status(3CURSES) – set and get forms field attributes
  • field_term(3CURSES) – assign application-specific routines for invocation by forms
  • field_type(3CURSES) – forms field data type validation
  • field_userptr(3CURSES) – associate application data with forms
  • filter(3CURSES) – curses miscellaneous utility routines
  • filter(3XCURSES) – disable use of certain terminal capabilities
  • flash(3CURSES) – curses bell and screen flash routines
  • flash(3XCURSES) – activate audio-visual alarm
  • flushinp(3CURSES) – curses miscellaneous utility routines
  • flushinp(3XCURSES) – discard type-ahead characters
  • form_cursor(3CURSES) – position forms window cursor
  • form_data(3CURSES) – tell if forms field has off-screen data ahead or behind
  • form_driver(3CURSES) – command processor for the forms subsystem
  • form_field(3CURSES) – connect fields to forms
  • form_field_attributes(3CURSES) – format the general display attributes of forms
  • form_field_buffer(3CURSES) – set and get forms field attributes
  • form_field_info(3CURSES) – get forms field characteristics
  • form_field_just(3CURSES) – format the general appearance of forms
  • form_field_new(3CURSES) – create and destroy forms fields
  • form_field_opts(3CURSES) – forms field option routines
  • form_fields(3CURSES) – connect fields to forms
  • form_fieldtype(3CURSES) – forms fieldtype routines
  • form_field_userptr(3CURSES) – associate application data with forms
  • form_field_validation(3CURSES) – forms field data type validation
  • form_hook(3CURSES) – assign application-specific routines for invocation by forms
  • form_init(3CURSES) – assign application-specific routines for invocation by forms
  • form_new(3CURSES) – create and destroy forms
  • form_new_page(3CURSES) – forms pagination
  • form_opts(3CURSES) – forms option routines
  • form_opts_off(3CURSES) – forms option routines
  • form_opts_on(3CURSES) – forms option routines
  • form_page(3CURSES) – set forms current page and field
  • form_post(3CURSES) – write or erase forms from associated subwindows
  • forms(3CURSES) – character based forms package
  • form_sub(3CURSES) – forms window and subwindow association routines
  • form_term(3CURSES) – assign application-specific routines for invocation by forms
  • form_userptr(3CURSES) – associate application data with forms
  • form_win(3CURSES) – forms window and subwindow association routines
  • free_field(3CURSES) – create and destroy forms fields
  • free_fieldtype(3CURSES) – forms fieldtype routines
  • free_form(3CURSES) – create and destroy forms
  • free_item(3CURSES) – create and destroy menus items
  • free_menu(3CURSES) – create and destroy menus
•   G
  • getbegyx(3CURSES) – get curses cursor and window coordinates
  • getbegyx(3XCURSES) – get cursor or window coordinates
  • getbkgd(3XCURSES) – set or get the background character (and rendition) of window
  • getbkgrnd(3XCURSES) – set or get the background character (and rendition) of window using a complex character
  • getcchar(3XCURSES) – get a wide character string (with rendition) from a cchar_t
  • getch(3CURSES) – get (or push back) characters from curses terminal keyboard
  • getch(3XCURSES) – get a single-byte character from the terminal
  • getmaxyx(3CURSES) – get curses cursor and window coordinates
  • getmaxyx(3XCURSES) – get cursor or window coordinates
  • getnstr(3XCURSES) – get a multibyte character string from terminal
  • getnwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • getn_wstr(3XCURSES) – get a wide character string from terminal
  • getparyx(3CURSES) – get curses cursor and window coordinates
  • getparyx(3XCURSES) – get cursor or window coordinates
  • getstr(3CURSES) – get character strings from curses terminal keyboard
  • getstr(3XCURSES) – get a multibyte character string from terminal
  • getsyx(3CURSES) – low-level curses routines
  • getwch(3CURSES) – get (or push back) wchar_t characters from curses terminal keyboard
  • get_wch(3XCURSES) – get a wide character from terminal
  • getwin(3CURSES) – curses miscellaneous utility routines
  • getwin(3XCURSES) – read a window from, and write a window to, a file
  • getwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • get_wstr(3XCURSES) – get a wide character string from terminal
  • getyx(3CURSES) – get curses cursor and window coordinates
  • getyx(3XCURSES) – get cursor or window coordinates
•   H
  • halfdelay(3CURSES) – curses terminal input option control routines
  • halfdelay(3XCURSES) – enable/disable half-delay mode
  • has_colors(3CURSES) – curses color manipulation functions
  • has_colors(3XCURSES) – manipulate color information
  • has_ic(3CURSES) – curses environment query routines
  • has_ic(3XCURSES) – determine insert/delete character/line capability
  • has_il(3CURSES) – curses environment query routines
  • has_il(3XCURSES) – determine insert/delete character/line capability
  • hide_panel(3CURSES) – panels deck manipulation routines
  • hline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • hline_set(3XCURSES) – use complex characters (and renditions) to draw lines
•   I
  • idcok(3CURSES) – curses terminal output option control routines
  • idcok(3XCURSES) – enable/disable hardware insert-character and delete-character features
  • idlok(3CURSES) – curses terminal output option control routines
  • idlok(3XCURSES) – terminal output control functions
  • immedok(3CURSES) – curses terminal output option control routines
  • immedok(3XCURSES) – call refresh on changes to window
  • inch(3CURSES) – get a character and its attributes from a curses window
  • inch(3XCURSES) – return a single-byte character (with rendition)
  • inchnstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • inchnstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • inchstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • inchstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • init_color(3CURSES) – curses color manipulation functions
  • init_color(3XCURSES) – manipulate color information
  • init_pair(3CURSES) – curses color manipulation functions
  • init_pair(3XCURSES) – manipulate color information
  • initscr(3CURSES) – curses screen initialization and manipulation routines
  • initscr(3XCURSES) – screen initialization functions
  • innstr(3CURSES) – get a string of characters from a curses window
  • innstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • innwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • innwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • insch(3CURSES) – insert a character before the character under the cursor in a curses window
  • insch(3XCURSES) – insert a character
  • insdelln(3CURSES) – delete and insert lines in a curses window
  • insdelln(3XCURSES) – insert/delete lines to/from the window
  • insertln(3CURSES) – delete and insert lines in a curses window
  • insertln(3XCURSES) – insert a line in a window
  • insnstr(3CURSES) – insert string before character under the cursor in a curses window
  • insnstr(3XCURSES) – insert a multibyte character string
  • insnwstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • ins_nwstr(3XCURSES) – insert a wide character string
  • insstr(3CURSES) – insert string before character under the cursor in a curses window
  • insstr(3XCURSES) – insert a multibyte character string
  • instr(3CURSES) – get a string of characters from a curses window
  • instr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • inswch(3CURSES) – insert a wchar_t character before the character under the cursor in a curses window
  • ins_wch(3XCURSES) – insert a complex character
  • inswstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • ins_wstr(3XCURSES) – insert a wide character string
  • intrflush(3CURSES) – curses terminal input option control routines
  • intrflush(3XCURSES) – enable or disable flush on interrupt
  • inwch(3CURSES) – get a wchar_t character and its attributes from a curses window
  • in_wch(3XCURSES) – retrieve a complex character (with rendition)
  • inwchnstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • in_wchnstr(3XCURSES) – retrieve complex character string (with rendition)
  • inwchstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • in_wchstr(3XCURSES) – retrieve complex character string (with rendition)
  • inwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • inwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • isendwin(3CURSES) – curses screen initialization and manipulation routines
  • isendwin(3XCURSES) – restore initial terminal environment
  • is_linetouched(3CURSES) – curses refresh control routines
  • is_linetouched(3XCURSES) – control window refresh
  • is_wintouched(3CURSES) – curses refresh control routines
  • is_wintouched(3XCURSES) – control window refresh
  • item_count(3CURSES) – connect and disconnect items to and from menus
  • item_description(3CURSES) – get menus item name and description
  • item_index(3CURSES) – set and get current menus items
  • item_init(3CURSES) – assign application-specific routines for automatic invocation by menus
  • item_name(3CURSES) – get menus item name and description
  • item_opts(3CURSES) – menus item option routines
  • item_opts_off(3CURSES) – menus item option routines
  • item_opts_on(3CURSES) – menus item option routines
  • item_term(3CURSES) – assign application-specific routines for automatic invocation by menus
  • item_userptr(3CURSES) – associate application data with menus items
  • item_value(3CURSES) – set and get menus item values
  • item_visible(3CURSES) – tell if menus item is visible
•   J
•   K
  • keyname(3CURSES) – curses miscellaneous utility routines
  • key_name(3XCURSES) – return character string used as key name
  • keyname(3XCURSES) – return character string used as key name
  • keypad(3CURSES) – curses terminal input option control routines
  • keypad(3XCURSES) – enable/disable keypad handling
  • killchar(3CURSES) – curses environment query routines
  • killchar(3XCURSES) – return current ERASE or KILL characters
  • killwchar(3XCURSES) – return current ERASE or KILL characters
•   L
  • label(3PLOT) – graphics interface
  • leaveok(3CURSES) – curses terminal output option control routines
  • leaveok(3XCURSES) – terminal output control functions
  • libcurses(3XCURSES) – X/Open Curses library
  • line(3PLOT) – graphics interface
  • linemod(3PLOT) – graphics interface
  • LINES(3XCURSES) – number of lines on terminal screen
  • link_field(3CURSES) – create and destroy forms fields
  • link_fieldtype(3CURSES) – forms fieldtype routines
  • longname(3CURSES) – curses environment query routines
  • longname(3XCURSES) – return full terminal type name
•   M
  • menu_attributes(3CURSES) – control menus display attributes
  • menu_back(3CURSES) – control menus display attributes
  • menu_cursor(3CURSES) – correctly position a menus cursor
  • menu_driver(3CURSES) – command processor for the menus subsystem
  • menu_fore(3CURSES) – control menus display attributes
  • menu_format(3CURSES) – set and get maximum numbers of rows and columns in menus
  • menu_grey(3CURSES) – control menus display attributes
  • menu_hook(3CURSES) – assign application-specific routines for automatic invocation by menus
  • menu_init(3CURSES) – assign application-specific routines for automatic invocation by menus
  • menu_item_current(3CURSES) – set and get current menus items
  • menu_item_name(3CURSES) – get menus item name and description
  • menu_item_new(3CURSES) – create and destroy menus items
  • menu_item_opts(3CURSES) – menus item option routines
  • menu_items(3CURSES) – connect and disconnect items to and from menus
  • menu_item_userptr(3CURSES) – associate application data with menus items
  • menu_item_value(3CURSES) – set and get menus item values
  • menu_item_visible(3CURSES) – tell if menus item is visible
  • menu_mark(3CURSES) – menus mark string routines
  • menu_new(3CURSES) – create and destroy menus
  • menu_opts(3CURSES) – menus option routines
  • menu_opts_off(3CURSES) – menus option routines
  • menu_opts_on(3CURSES) – menus option routines
  • menu_pad(3CURSES) – control menus display attributes
  • menu_pattern(3CURSES) – set and get menus pattern match buffer
  • menu_post(3CURSES) – write or erase menus from associated subwindows
  • menus(3CURSES) – character based menus package
  • menu_sub(3CURSES) – menus window and subwindow association routines
  • menu_term(3CURSES) – assign application-specific routines for automatic invocation by menus
  • menu_userptr(3CURSES) – associate application data with menus
  • menu_win(3CURSES) – menus window and subwindow association routines
  • meta(3CURSES) – curses terminal input option control routines
  • meta(3XCURSES) – enable/disable meta keys
  • move(3CURSES) – move curses window cursor
  • move(3PLOT) – graphics interface
  • move(3XCURSES) – move cursor in window
  • move_field(3CURSES) – connect fields to forms
  • movenextch(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • move_panel(3CURSES) – move a panels window on the virtual screen
  • moveprevch(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • mvaddch(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • mvaddch(3XCURSES) – add a character (with rendition) to a window
  • mvaddchnstr(3CURSES) – add string of characters and attributes to a curses window
  • mvaddchnstr(3XCURSES) – copy a character string (with renditions) to a window
  • mvaddchstr(3CURSES) – add string of characters and attributes to a curses window
  • mvaddchstr(3XCURSES) – copy a character string (with renditions) to a window
  • mvaddnstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • mvaddnstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • mvaddnwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • mvaddnwstr(3XCURSES) – add a wide-character string to a window
  • mvaddstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • mvaddstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • mvaddwch(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • mvadd_wch(3XCURSES) – add a complex character (with rendition) to a window
  • mvaddwchnstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • mvadd_wchnstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • mvaddwchstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • mvadd_wchstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • mvaddwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • mvaddwstr(3XCURSES) – add a wide-character string to a window
  • mvchgat(3XCURSES) – change the rendition of characters in a window
  • mvcur(3CURSES) – curses interfaces to terminfo database
  • mvcur(3XCURSES) – move the cursor
  • mvdelch(3CURSES) – delete character under cursor in a curses window
  • mvdelch(3XCURSES) – remove a character
  • mvderwin(3CURSES) – create curses windows
  • mvderwin(3XCURSES) – map area of parent window to subwindow
  • mvgetch(3CURSES) – get (or push back) characters from curses terminal keyboard
  • mvgetch(3XCURSES) – get a single-byte character from the terminal
  • mvgetnstr(3XCURSES) – get a multibyte character string from terminal
  • mvgetnwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • mvgetn_wstr(3XCURSES) – get a wide character string from terminal
  • mvgetstr(3CURSES) – get character strings from curses terminal keyboard
  • mvgetstr(3XCURSES) – get a multibyte character string from terminal
  • mvgetwch(3CURSES) – get (or push back) wchar_t characters from curses terminal keyboard
  • mvget_wch(3XCURSES) – get a wide character from terminal
  • mvgetwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • mvget_wstr(3XCURSES) – get a wide character string from terminal
  • mvhline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • mvhline_set(3XCURSES) – use complex characters (and renditions) to draw lines
  • mvinch(3CURSES) – get a character and its attributes from a curses window
  • mvinch(3XCURSES) – return a single-byte character (with rendition)
  • mvinchnstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • mvinchnstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • mvinchstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • mvinchstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • mvinnstr(3CURSES) – get a string of characters from a curses window
  • mvinnstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • mvinnwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • mvinnwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • mvinsch(3CURSES) – insert a character before the character under the cursor in a curses window
  • mvinsch(3XCURSES) – insert a character
  • mvinsnstr(3CURSES) – insert string before character under the cursor in a curses window
  • mvinsnstr(3XCURSES) – insert a multibyte character string
  • mvinsnwstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • mvins_nwstr(3XCURSES) – insert a wide character string
  • mvinsstr(3CURSES) – insert string before character under the cursor in a curses window
  • mvinsstr(3XCURSES) – insert a multibyte character string
  • mvinstr(3CURSES) – get a string of characters from a curses window
  • mvinstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • mvinswch(3CURSES) – insert a wchar_t character before the character under the cursor in a curses window
  • mvins_wch(3XCURSES) – insert a complex character
  • mvinswstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • mvins_wstr(3XCURSES) – insert a wide character string
  • mvinwch(3CURSES) – get a wchar_t character and its attributes from a curses window
  • mvin_wch(3XCURSES) – retrieve a complex character (with rendition)
  • mvinwchnstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • mvin_wchnstr(3XCURSES) – retrieve complex character string (with rendition)
  • mvinwchstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • mvin_wchstr(3XCURSES) – retrieve complex character string (with rendition)
  • mvinwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • mvinwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • mvprintw(3CURSES) – print formatted output in curses windows
  • mvprintw(3XCURSES) – print formatted output window
  • mvscanw(3CURSES) – convert formatted input from a curses widow
  • mvscanw(3XCURSES) – convert formatted input from a window
  • mvvline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • mvvline_set(3XCURSES) – use complex characters (and renditions) to draw lines
  • mvwaddch(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • mvwaddch(3XCURSES) – add a character (with rendition) to a window
  • mvwaddchnstr(3CURSES) – add string of characters and attributes to a curses window
  • mvwaddchnstr(3XCURSES) – copy a character string (with renditions) to a window
  • mvwaddchstr(3CURSES) – add string of characters and attributes to a curses window
  • mvwaddchstr(3XCURSES) – copy a character string (with renditions) to a window
  • mvwaddnstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • mvwaddnstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • mvwaddnwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • mvwaddnwstr(3XCURSES) – add a wide-character string to a window
  • mvwaddstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • mvwaddstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • mvwaddwch(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • mvwadd_wch(3XCURSES) – add a complex character (with rendition) to a window
  • mvwaddwchnstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • mvwadd_wchnstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • mvwaddwchstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • mvwadd_wchstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • mvwaddwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • mvwaddwstr(3XCURSES) – add a wide-character string to a window
  • mvwchgat(3XCURSES) – change the rendition of characters in a window
  • mvwdelch(3CURSES) – delete character under cursor in a curses window
  • mvwdelch(3XCURSES) – remove a character
  • mvwgetch(3CURSES) – get (or push back) characters from curses terminal keyboard
  • mvwgetch(3XCURSES) – get a single-byte character from the terminal
  • mvwgetnstr(3XCURSES) – get a multibyte character string from terminal
  • mvwgetnwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • mvwgetn_wstr(3XCURSES) – get a wide character string from terminal
  • mvwgetstr(3CURSES) – get character strings from curses terminal keyboard
  • mvwgetstr(3XCURSES) – get a multibyte character string from terminal
  • mvwgetwch(3CURSES) – get (or push back) wchar_t characters from curses terminal keyboard
  • mvwget_wch(3XCURSES) – get a wide character from terminal
  • mvwgetwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • mvwget_wstr(3XCURSES) – get a wide character string from terminal
  • mvwhline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • mvwhline_set(3XCURSES) – use complex characters (and renditions) to draw lines
  • mvwin(3CURSES) – create curses windows
  • mvwin(3XCURSES) – move window
  • mvwinch(3CURSES) – get a character and its attributes from a curses window
  • mvwinch(3XCURSES) – return a single-byte character (with rendition)
  • mvwinchnstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • mvwinchnstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • mvwinchstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • mvwinchstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • mvwinnstr(3CURSES) – get a string of characters from a curses window
  • mvwinnstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • mvwinnwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • mvwinnwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • mvwinsch(3CURSES) – insert a character before the character under the cursor in a curses window
  • mvwinsch(3XCURSES) – insert a character
  • mvwinsnstr(3CURSES) – insert string before character under the cursor in a curses window
  • mvwinsnstr(3XCURSES) – insert a multibyte character string
  • mvwinsnwstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • mvwins_nwstr(3XCURSES) – insert a wide character string
  • mvwinsstr(3CURSES) – insert string before character under the cursor in a curses window
  • mvwinsstr(3XCURSES) – insert a multibyte character string
  • mvwinstr(3CURSES) – get a string of characters from a curses window
  • mvwinstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • mvwinswch(3CURSES) – insert a wchar_t character before the character under the cursor in a curses window
  • mvwins_wch(3XCURSES) – insert a complex character
  • mvwinswstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • mvwins_wstr(3XCURSES) – insert a wide character string
  • mvwinwch(3CURSES) – get a wchar_t character and its attributes from a curses window
  • mvwin_wch(3XCURSES) – retrieve a complex character (with rendition)
  • mvwinwchnstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • mvwin_wchnstr(3XCURSES) – retrieve complex character string (with rendition)
  • mvwinwchstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • mvwin_wchstr(3XCURSES) – retrieve complex character string (with rendition)
  • mvwinwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • mvwinwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • mvwprintw(3CURSES) – print formatted output in curses windows
  • mvwprintw(3XCURSES) – print formatted output window
  • mvwscanw(3CURSES) – convert formatted input from a curses widow
  • mvwscanw(3XCURSES) – convert formatted input from a window
  • mvwvline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • mvwvline_set(3XCURSES) – use complex characters (and renditions) to draw lines
•   N
  • napms(3CURSES) – low-level curses routines
  • napms(3XCURSES) – sleep process for a specified length of time
  • new_field(3CURSES) – create and destroy forms fields
  • new_fieldtype(3CURSES) – forms fieldtype routines
  • new_form(3CURSES) – create and destroy forms
  • new_item(3CURSES) – create and destroy menus items
  • new_menu(3CURSES) – create and destroy menus
  • newpad(3CURSES) – create and display curses pads
  • newpad(3XCURSES) – create or refresh a pad or subpad
  • new_page(3CURSES) – forms pagination
  • new_panel(3CURSES) – create and destroy panels
  • newterm(3CURSES) – curses screen initialization and manipulation routines
  • newterm(3XCURSES) – screen initialization functions
  • newwin(3CURSES) – create curses windows
  • newwin(3XCURSES) – create a new window or subwindow
  • nl(3CURSES) – curses terminal output option control routines
  • nl(3XCURSES) – enable/disable newline control
  • nocbreak(3CURSES) – curses terminal input option control routines
  • nocbreak(3XCURSES) – set input mode controls
  • nodelay(3CURSES) – curses terminal input option control routines
  • nodelay(3XCURSES) – set blocking or non-blocking read
  • noecho(3CURSES) – curses terminal input option control routines
  • noecho(3XCURSES) – enable/disable terminal echo
  • nonl(3CURSES) – curses terminal output option control routines
  • nonl(3XCURSES) – enable/disable newline control
  • noqiflush(3CURSES) – curses terminal input option control routines
  • noqiflush(3XCURSES) – control flush of input and output on interrupt
  • noraw(3CURSES) – curses terminal input option control routines
  • noraw(3XCURSES) – set input mode controls
  • notimeout(3CURSES) – curses terminal input option control routines
  • notimeout(3XCURSES) – set timed blocking or non-blocking read
•   O
  • openpl(3PLOT) – graphics interface
  • openvt(3PLOT) – graphics interface
  • overlay(3CURSES) – overlap and manipulate overlapped curses windows
  • overlay(3XCURSES) – copy overlapped windows
  • overwrite(3CURSES) – overlap and manipulate overlapped curses windows
  • overwrite(3XCURSES) – copy overlapped windows
•   P
  • pair_content(3CURSES) – curses color manipulation functions
  • pair_content(3XCURSES) – manipulate color information
  • PAIR_NUMBER(3XCURSES) – manipulate color information
  • panel_above(3CURSES) – panels deck traversal primitives
  • panel_below(3CURSES) – panels deck traversal primitives
  • panel_hidden(3CURSES) – panels deck manipulation routines
  • panel_move(3CURSES) – move a panels window on the virtual screen
  • panel_new(3CURSES) – create and destroy panels
  • panels(3CURSES) – character based panels package
  • panel_show(3CURSES) – panels deck manipulation routines
  • panel_top(3CURSES) – panels deck manipulation routines
  • panel_update(3CURSES) – panels virtual screen refresh routine
  • panel_userptr(3CURSES) – associate application data with a panels panel
  • panel_window(3CURSES) – get or set the current window of a panels panel
  • pechochar(3CURSES) – create and display curses pads
  • pechochar(3XCURSES) – add character and refresh window
  • pechowchar(3CURSES) – create and display curses pads
  • pecho_wchar(3XCURSES) – add character and refresh window
  • plot(3PLOT) – graphics interface
  • pnoutrefresh(3CURSES) – create and display curses pads
  • pnoutrefresh(3XCURSES) – create or refresh a pad or subpad
  • point(3PLOT) – graphics interface
  • pos_form_cursor(3CURSES) – position forms window cursor
  • pos_menu_cursor(3CURSES) – correctly position a menus cursor
  • post_form(3CURSES) – write or erase forms from associated subwindows
  • post_menu(3CURSES) – write or erase menus from associated subwindows
  • prefresh(3CURSES) – create and display curses pads
  • prefresh(3XCURSES) – create or refresh a pad or subpad
  • printw(3CURSES) – print formatted output in curses windows
  • printw(3XCURSES) – print formatted output window
  • putp(3CURSES) – curses interfaces to terminfo database
  • putp(3XCURSES) – apply padding information and output string
  • putwin(3CURSES) – curses miscellaneous utility routines
  • putwin(3XCURSES) – read a window from, and write a window to, a file
•   Q
  • qiflush(3CURSES) – curses terminal input option control routines
  • qiflush(3XCURSES) – control flush of input and output on interrupt
•   R
  • raw(3CURSES) – curses terminal input option control routines
  • raw(3XCURSES) – set input mode controls
  • redrawwin(3CURSES) – refresh curses windows and lines
  • redrawwin(3XCURSES) – redraw screen or portion of screen
  • refresh(3CURSES) – refresh curses windows and lines
  • refresh(3XCURSES) – refresh windows and lines
  • replace_panel(3CURSES) – get or set the current window of a panels panel
  • reset_prog_mode(3CURSES) – low-level curses routines
  • reset_prog_mode(3XCURSES) – save/restore terminal modes
  • reset_shell_mode(3CURSES) – low-level curses routines
  • reset_shell_mode(3XCURSES) – save/restore terminal modes
  • resetty(3CURSES) – low-level curses routines
  • resetty(3XCURSES) – restore/save terminal modes
  • restartterm(3CURSES) – curses interfaces to terminfo database
  • restartterm(3XCURSES) – interfaces to the terminfo database
  • ripoffline(3CURSES) – low-level curses routines
  • ripoffline(3XCURSES) – reserve screen line for dedicated purpose
•   S
  • savetty(3CURSES) – low-level curses routines
  • savetty(3XCURSES) – restore/save terminal modes
  • scale_form(3CURSES) – forms window and subwindow association routines
  • scale_menu(3CURSES) – menus window and subwindow association routines
  • scanw(3CURSES) – convert formatted input from a curses widow
  • scanw(3XCURSES) – convert formatted input from a window
  • scr_dump(3CURSES) – read or write a curses screen from or to a file
  • scr_dump(3XCURSES) – write screen contents to/from a file
  • scr_init(3CURSES) – read or write a curses screen from or to a file
  • scr_init(3XCURSES) – write screen contents to/from a file
  • scrl(3CURSES) – scroll a curses window
  • scrl(3XCURSES) – scroll a window
  • scroll(3CURSES) – scroll a curses window
  • scroll(3XCURSES) – scroll a window
  • scrollok(3CURSES) – curses terminal output option control routines
  • scrollok(3XCURSES) – terminal output control functions
  • scr_restore(3CURSES) – read or write a curses screen from or to a file
  • scr_restore(3XCURSES) – write screen contents to/from a file
  • scr_set(3CURSES) – read or write a curses screen from or to a file
  • scr_set(3XCURSES) – write screen contents to/from a file
  • setcchar(3XCURSES) – set a cchar_t type character from a wide character and rendition
  • set_current_field(3CURSES) – set forms current page and field
  • set_current_item(3CURSES) – set and get current menus items
  • set_curterm(3CURSES) – curses interfaces to terminfo database
  • set_curterm(3XCURSES) – interfaces to the terminfo database
  • set_field_back(3CURSES) – format the general display attributes of forms
  • set_field_buffer(3CURSES) – set and get forms field attributes
  • set_field_fore(3CURSES) – format the general display attributes of forms
  • set_field_init(3CURSES) – assign application-specific routines for invocation by forms
  • set_field_just(3CURSES) – format the general appearance of forms
  • set_field_opts(3CURSES) – forms field option routines
  • set_field_pad(3CURSES) – format the general display attributes of forms
  • set_field_status(3CURSES) – set and get forms field attributes
  • set_field_term(3CURSES) – assign application-specific routines for invocation by forms
  • set_field_type(3CURSES) – forms field data type validation
  • set_fieldtype_arg(3CURSES) – forms fieldtype routines
  • set_fieldtype_choice(3CURSES) – forms fieldtype routines
  • set_field_userptr(3CURSES) – associate application data with forms
  • set_form_fields(3CURSES) – connect fields to forms
  • set_form_init(3CURSES) – assign application-specific routines for invocation by forms
  • set_form_opts(3CURSES) – forms option routines
  • set_form_page(3CURSES) – set forms current page and field
  • set_form_sub(3CURSES) – forms window and subwindow association routines
  • set_form_term(3CURSES) – assign application-specific routines for invocation by forms
  • set_form_userptr(3CURSES) – associate application data with forms
  • set_form_win(3CURSES) – forms window and subwindow association routines
  • set_item_init(3CURSES) – assign application-specific routines for automatic invocation by menus
  • set_item_opts(3CURSES) – menus item option routines
  • set_item_term(3CURSES) – assign application-specific routines for automatic invocation by menus
  • set_item_userptr(3CURSES) – associate application data with menus items
  • set_item_value(3CURSES) – set and get menus item values
  • set_max_field(3CURSES) – set and get forms field attributes
  • set_menu_back(3CURSES) – control menus display attributes
  • set_menu_fore(3CURSES) – control menus display attributes
  • set_menu_format(3CURSES) – set and get maximum numbers of rows and columns in menus
  • set_menu_grey(3CURSES) – control menus display attributes
  • set_menu_init(3CURSES) – assign application-specific routines for automatic invocation by menus
  • set_menu_items(3CURSES) – connect and disconnect items to and from menus
  • set_menu_mark(3CURSES) – menus mark string routines
  • set_menu_opts(3CURSES) – menus option routines
  • set_menu_pad(3CURSES) – control menus display attributes
  • set_menu_pattern(3CURSES) – set and get menus pattern match buffer
  • set_menu_sub(3CURSES) – menus window and subwindow association routines
  • set_menu_term(3CURSES) – assign application-specific routines for automatic invocation by menus
  • set_menu_userptr(3CURSES) – associate application data with menus
  • set_menu_win(3CURSES) – menus window and subwindow association routines
  • set_new_page(3CURSES) – forms pagination
  • set_panel_userptr(3CURSES) – associate application data with a panels panel
  • setscrreg(3CURSES) – curses terminal output option control routines
  • setscrreg(3XCURSES) – terminal output control functions
  • setsyx(3CURSES) – low-level curses routines
  • set_term(3CURSES) – curses screen initialization and manipulation routines
  • setterm(3CURSES) – curses interfaces to terminfo database
  • set_term(3XCURSES) – switch between terminals
  • set_top_row(3CURSES) – set and get current menus items
  • setupterm(3CURSES) – curses interfaces to terminfo database
  • setupterm(3XCURSES) – interfaces to the terminfo database
  • show_panel(3CURSES) – panels deck manipulation routines
  • slk_attroff(3CURSES) – curses soft label routines
  • slk_attr_off(3XCURSES) – soft label functions
  • slk_attroff(3XCURSES) – soft label functions
  • slk_attron(3CURSES) – curses soft label routines
  • slk_attr_on(3XCURSES) – soft label functions
  • slk_attron(3XCURSES) – soft label functions
  • slk_attrset(3CURSES) – curses soft label routines
  • slk_attr_set(3XCURSES) – soft label functions
  • slk_attrset(3XCURSES) – soft label functions
  • slk_clear(3CURSES) – curses soft label routines
  • slk_clear(3XCURSES) – soft label functions
  • slk_color(3XCURSES) – soft label functions
  • slk_init(3CURSES) – curses soft label routines
  • slk_init(3XCURSES) – soft label functions
  • slk_label(3CURSES) – curses soft label routines
  • slk_label(3XCURSES) – soft label functions
  • slk_noutrefresh(3CURSES) – curses soft label routines
  • slk_noutrefresh(3XCURSES) – soft label functions
  • slk_refresh(3CURSES) – curses soft label routines
  • slk_refresh(3XCURSES) – soft label functions
  • slk_restore(3CURSES) – curses soft label routines
  • slk_restore(3XCURSES) – soft label functions
  • slk_set(3CURSES) – curses soft label routines
  • slk_set(3XCURSES) – soft label functions
  • slk_touch(3CURSES) – curses soft label routines
  • slk_touch(3XCURSES) – soft label functions
  • slk_wset(3XCURSES) – soft label functions
  • space(3PLOT) – graphics interface
  • standend(3CURSES) – curses character and window attribute control routines
  • standend(3XCURSES) – set/clear window attributes
  • standout(3CURSES) – curses character and window attribute control routines
  • standout(3XCURSES) – set/clear window attributes
  • start_color(3CURSES) – curses color manipulation functions
  • start_color(3XCURSES) – manipulate color information
  • stdscr(3XCURSES) – default window
  • subpad(3CURSES) – create and display curses pads
  • subpad(3XCURSES) – create or refresh a pad or subpad
  • subwin(3CURSES) – create curses windows
  • subwin(3XCURSES) – create a new window or subwindow
  • syncok(3CURSES) – create curses windows
  • syncok(3XCURSES) – synchronize window with its parents or children
•   T
  • termattrs(3CURSES) – curses environment query routines
  • term_attrs(3XCURSES) – get supported terminal video attributes
  • termattrs(3XCURSES) – get supported terminal video attributes
  • termname(3CURSES) – curses environment query routines
  • termname(3XCURSES) – return the value of the environmental variable TERM
  • tgetent(3CURSES) – curses interfaces (emulated) to the termcap library
  • tgetent(3XCURSES) – emulate the termcap database
  • tgetflag(3CURSES) – curses interfaces (emulated) to the termcap library
  • tgetflag(3XCURSES) – emulate the termcap database
  • tgetnum(3CURSES) – curses interfaces (emulated) to the termcap library
  • tgetnum(3XCURSES) – emulate the termcap database
  • tgetstr(3CURSES) – curses interfaces (emulated) to the termcap library
  • tgetstr(3XCURSES) – emulate the termcap database
  • tgoto(3CURSES) – curses interfaces (emulated) to the termcap library
  • tgoto(3XCURSES) – emulate the termcap database
  • tigetflag(3CURSES) – curses interfaces to terminfo database
  • tigetflag(3XCURSES) – return the value of a terminfo capability
  • tigetnum(3CURSES) – curses interfaces to terminfo database
  • tigetnum(3XCURSES) – return the value of a terminfo capability
  • tigetstr(3CURSES) – curses interfaces to terminfo database
  • tigetstr(3XCURSES) – return the value of a terminfo capability
  • timeout(3CURSES) – curses terminal input option control routines
  • timeout(3XCURSES) – set timed blocking or non-blocking read
  • top_panel(3CURSES) – panels deck manipulation routines
  • top_row(3CURSES) – set and get current menus items
  • touchline(3CURSES) – curses refresh control routines
  • touchline(3XCURSES) – control window refresh
  • touchwin(3CURSES) – curses refresh control routines
  • touchwin(3XCURSES) – control window refresh
  • tparm(3CURSES) – curses interfaces to terminfo database
  • tparm(3XCURSES) – return the value of a terminfo capability
  • tputs(3CURSES) – curses interfaces to terminfo database
  • tputs(3XCURSES) – apply padding information and output string
  • typeahead(3CURSES) – curses terminal input option control routines
  • typeahead(3XCURSES) – check for type-ahead characters
•   U
  • unctrl(3CURSES) – curses miscellaneous utility routines
  • unctrl(3XCURSES) – generate printable representation of a character
  • ungetch(3CURSES) – get (or push back) characters from curses terminal keyboard
  • ungetch(3XCURSES) – push character back onto the input queue
  • ungetwch(3CURSES) – get (or push back) wchar_t characters from curses terminal keyboard
  • unget_wch(3XCURSES) – push character back onto the input queue
  • unpost_form(3CURSES) – write or erase forms from associated subwindows
  • unpost_menu(3CURSES) – write or erase menus from associated subwindows
  • untouchwin(3CURSES) – curses refresh control routines
  • untouchwin(3XCURSES) – control window refresh
  • update_panels(3CURSES) – panels virtual screen refresh routine
  • use_env(3CURSES) – curses miscellaneous utility routines
  • use_env(3XCURSES) – specify source of screen size information
•   V
  • vidattr(3CURSES) – curses interfaces to terminfo database
  • vid_attr(3XCURSES) – output attributes to the terminal
  • vidattr(3XCURSES) – output attributes to the terminal
  • vidputs(3CURSES) – curses interfaces to terminfo database
  • vid_puts(3XCURSES) – output attributes to the terminal
  • vidputs(3XCURSES) – output attributes to the terminal
  • vline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • vline_set(3XCURSES) – use complex characters (and renditions) to draw lines
  • vwprintw(3CURSES) – print formatted output in curses windows
  • vw_printw(3XCURSES) – print formatted output in window
  • vwprintw(3XCURSES) – print formatted output in window
  • vwscanw(3CURSES) – convert formatted input from a curses widow
  • vw_scanw(3XCURSES) – convert formatted input from a window
  • vwscanw(3XCURSES) – convert formatted input from a window
•   W
  • waddch(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • waddch(3XCURSES) – add a character (with rendition) to a window
  • waddchnstr(3CURSES) – add string of characters and attributes to a curses window
  • waddchnstr(3XCURSES) – copy a character string (with renditions) to a window
  • waddchstr(3CURSES) – add string of characters and attributes to a curses window
  • waddchstr(3XCURSES) – copy a character string (with renditions) to a window
  • waddnstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • waddnstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • waddnwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • waddnwstr(3XCURSES) – add a wide-character string to a window
  • waddstr(3CURSES) – add a string of characters to a curses window and advance cursor
  • waddstr(3XCURSES) – add a multi-byte character string (without rendition) to a window
  • waddwch(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • wadd_wch(3XCURSES) – add a complex character (with rendition) to a window
  • waddwchnstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • wadd_wchnstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • waddwchstr(3CURSES) – add string of wchar_t characters (and attributes) to a curses window
  • wadd_wchstr(3XCURSES) – copy a string of complex characters (with renditions) to a window
  • waddwstr(3CURSES) – add a string of wchar_t characters to a curses window and advance cursor
  • waddwstr(3XCURSES) – add a wide-character string to a window
  • wadjcurspos(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • wattr_get(3XCURSES) – control window attributes
  • wattroff(3CURSES) – curses character and window attribute control routines
  • wattr_off(3XCURSES) – control window attributes
  • wattroff(3XCURSES) – change foreground window attributes
  • wattron(3CURSES) – curses character and window attribute control routines
  • wattr_on(3XCURSES) – control window attributes
  • wattron(3XCURSES) – change foreground window attributes
  • wattrset(3CURSES) – curses character and window attribute control routines
  • wattr_set(3XCURSES) – control window attributes
  • wattrset(3XCURSES) – change foreground window attributes
  • wbkgd(3CURSES) – curses window background manipulation routines
  • wbkgd(3XCURSES) – set or get the background character (and rendition) of window
  • wbkgdset(3CURSES) – curses window background manipulation routines
  • wbkgdset(3XCURSES) – set or get the background character (and rendition) of window
  • wbkgrnd(3XCURSES) – set or get the background character (and rendition) of window using a complex character
  • wbkgrndset(3XCURSES) – set or get the background character (and rendition) of window using a complex character
  • wborder(3CURSES) – create curses borders, horizontal and vertical lines
  • wborder(3XCURSES) – add a single-byte border to a window
  • wborder_set(3XCURSES) – use complex characters (and renditions) to draw borders
  • wchgat(3XCURSES) – change the rendition of characters in a window
  • wclear(3CURSES) – clear all or part of a curses window
  • wclear(3XCURSES) – clear a window
  • wclrtobot(3CURSES) – clear all or part of a curses window
  • wclrtobot(3XCURSES) – clear to the end of a window
  • wclrtoeol(3CURSES) – clear all or part of a curses window
  • wclrtoeol(3XCURSES) – clear to the end of a line
  • wcolor_set(3XCURSES) – control window attributes
  • wcursyncup(3CURSES) – create curses windows
  • wcursyncup(3XCURSES) – synchronize window with its parents or children
  • wdelch(3CURSES) – delete character under cursor in a curses window
  • wdelch(3XCURSES) – remove a character
  • wdeleteln(3CURSES) – delete and insert lines in a curses window
  • wdeleteln(3XCURSES) – remove a line
  • wechochar(3CURSES) – add a character (with attributes) to a curses window and advance cursor
  • wechochar(3XCURSES) – add a single-byte character and refresh window
  • wechowchar(3CURSES) – add a wchar_t character (with attributes) to a curses window and advance cursor
  • wecho_wchar(3XCURSES) – add a complex character and refresh window
  • werase(3CURSES) – clear all or part of a curses window
  • werase(3XCURSES) – clear a window
  • wgetbkgrnd(3XCURSES) – set or get the background character (and rendition) of window using a complex character
  • wgetch(3CURSES) – get (or push back) characters from curses terminal keyboard
  • wgetch(3XCURSES) – get a single-byte character from the terminal
  • wgetnstr(3CURSES) – get character strings from curses terminal keyboard
  • wgetnstr(3XCURSES) – get a multibyte character string from terminal
  • wgetnwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • wgetn_wstr(3XCURSES) – get a wide character string from terminal
  • wgetstr(3CURSES) – get character strings from curses terminal keyboard
  • wgetstr(3XCURSES) – get a multibyte character string from terminal
  • wgetwch(3CURSES) – get (or push back) wchar_t characters from curses terminal keyboard
  • wget_wch(3XCURSES) – get a wide character from terminal
  • wgetwstr(3CURSES) – get wchar_t character strings from curses terminal keyboard
  • wget_wstr(3XCURSES) – get a wide character string from terminal
  • whline(3CURSES) – create curses borders, horizontal and vertical lines
  • whline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • whline_set(3XCURSES) – use complex characters (and renditions) to draw lines
  • winch(3CURSES) – get a character and its attributes from a curses window
  • winch(3XCURSES) – return a single-byte character (with rendition)
  • winchnstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • winchnstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • winchstr(3CURSES) – get a string of characters (and attributes) from a curses window
  • winchstr(3XCURSES) – retrieve a single-byte character string (with rendition)
  • winnstr(3CURSES) – get a string of characters from a curses window
  • winnstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • winnwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • winnwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • winsch(3CURSES) – insert a character before the character under the cursor in a curses window
  • winsch(3XCURSES) – insert a character
  • winsdelln(3CURSES) – delete and insert lines in a curses window
  • winsdelln(3XCURSES) – insert/delete lines to/from the window
  • winsertln(3CURSES) – delete and insert lines in a curses window
  • winsertln(3XCURSES) – insert a line in a window
  • winsnstr(3CURSES) – insert string before character under the cursor in a curses window
  • winsnstr(3XCURSES) – insert a multibyte character string
  • winsnwstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • wins_nwstr(3XCURSES) – insert a wide character string
  • winsstr(3CURSES) – insert string before character under the cursor in a curses window
  • winsstr(3XCURSES) – insert a multibyte character string
  • winstr(3CURSES) – get a string of characters from a curses window
  • winstr(3XCURSES) – retrieve a multibyte character string (without rendition)
  • winswch(3CURSES) – insert a wchar_t character before the character under the cursor in a curses window
  • wins_wch(3XCURSES) – insert a complex character
  • winswstr(3CURSES) – insert wchar_t string before character under the cursor in a curses window
  • wins_wstr(3XCURSES) – insert a wide character string
  • winwch(3CURSES) – get a wchar_t character and its attributes from a curses window
  • win_wch(3XCURSES) – retrieve a complex character (with rendition)
  • winwchnstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • win_wchnstr(3XCURSES) – retrieve complex character string (with rendition)
  • winwchstr(3CURSES) – get a string of wchar_t characters (and attributes) from a curses window
  • win_wchstr(3XCURSES) – retrieve complex character string (with rendition)
  • winwstr(3CURSES) – get a string of wchar_t characters from a curses window
  • winwstr(3XCURSES) – retrieve a wide character string (without rendition)
  • wmove(3CURSES) – move curses window cursor
  • wmove(3XCURSES) – move cursor in window
  • wmovenextch(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • wmoveprevch(3CURSES) – these functions are added to ALE curses library for moving the cursor by character.
  • wnoutrefresh(3CURSES) – refresh curses windows and lines
  • wnoutrefresh(3XCURSES) – refresh windows and lines
  • wprintw(3CURSES) – print formatted output in curses windows
  • wprintw(3XCURSES) – print formatted output window
  • wredrawln(3CURSES) – refresh curses windows and lines
  • wredrawln(3XCURSES) – redraw screen or portion of screen
  • wrefresh(3CURSES) – refresh curses windows and lines
  • wrefresh(3XCURSES) – refresh windows and lines
  • wscanw(3CURSES) – convert formatted input from a curses widow
  • wscanw(3XCURSES) – convert formatted input from a window
  • wscrl(3CURSES) – scroll a curses window
  • wscrl(3XCURSES) – scroll a window
  • wsetscrreg(3CURSES) – curses terminal output option control routines
  • wsetscrreg(3XCURSES) – terminal output control functions
  • wstandend(3CURSES) – curses character and window attribute control routines
  • wstandend(3XCURSES) – set/clear window attributes
  • wstandout(3CURSES) – curses character and window attribute control routines
  • wstandout(3XCURSES) – set/clear window attributes
  • wsyncdown(3CURSES) – create curses windows
  • wsyncdown(3XCURSES) – synchronize window with its parents or children
  • wsyncup(3CURSES) – create curses windows
  • wsyncup(3XCURSES) – synchronize window with its parents or children
  • wtimeout(3CURSES) – curses terminal input option control routines
  • wtimeout(3XCURSES) – set timed blocking or non-blocking read
  • wtouchln(3CURSES) – curses refresh control routines
  • wtouchln(3XCURSES) – control window refresh
  • wunctrl(3XCURSES) – generate printable representation of a wide character
  • wvline(3CURSES) – create curses borders, horizontal and vertical lines
  • wvline(3XCURSES) – use single-byte characters (and renditions) to draw lines
  • wvline_set(3XCURSES) – use complex characters (and renditions) to draw lines
•   X
•   Y
•   Z