fwflash(1M)

Skip to ContentSun and Oracle Channel Sun How to Buy Log In

man pages section 1M: System Administration Commands

View this book in:

Other Languages
日本語

Contained Within

Solaris 10 Reference Manual Collection

Find More Documentation

Featured Support Resources

Download this book in PDF (8966 KB)

Name

fwflash– firmware query and update utility

Synopsis

/usr/sbin/fwflash  [-l [-c device_class | ALL ]]
     | [-v] | [-h]

fwflash  [-f file | -r file]
     [-y] [-d dev_spec]

Description

The fwflash command writes a binary image file to flash devices of an HBA or HCA device. It also provides the ability to read firmware to a file if supported by the device. Because changing the firmware in a device can have significant impact on the stability of a system, only users with the privilege All are allowed to execute this command. Users authorized to run fwflash can be granted the “Firmware Flash Update” Rights Profile.

The first form of the command, above, provides information about devices. It lists all devices currently available on the system and supported by fwflash for firmware upgrade. You can filter the list operation, to display only specified classes of devices. The second form of the command provides the operations to read or write the firmware images to specific devices.

Options

The following options are supported:

-c device_class

An optional parameter, valid only when used with the -l option. This option causes the command to list only devices of a specific class type. Currently supported classes are IB or ALL. If -c is not specified for the -loption, the class defaults to ALL.

-d dev_spec

The dev_spec is an identifier of the device that the user wants to modify with the -for -r operation. dev_spec can be either the absolute path name as displayed in the -l listing or as the device number from the same listing. If the device cannot be found, the command fails.

-f file

Specify the path to a binary firmware file you want to write to the device. fwflash will verify that the file is a valid firmware binary for the dev_spec specified. If it is not, the command fails with an appropriate error message.

-h

List the command line help for fwflash.

-l

List the devices on a system available for firmware upgrade and display information specific to each device or device class.

For InfiniBand (IB) devices, the list operation displays the guids (Globally Unique Identifier) currently set for the HCA, as well as the current firmware revision installed. There are four separate guids on the HCA; two of them can be set with the same value.

-r file

Specify the path to a file to create when reading the firmware from the device. The -f and -r options are mutually exclusive.

-v

Output fwflash version information and exit.

-y

Valid during an -f or -r operation, causes fwflash not to prompt for confirmation during operation and operate non-interactively.

Examples

Example 1 Entering Command Without Arguments

The following command shows fwflash when the command is entered without arguments.

example# fwflash
Usage: fwflash [-l [-c <device_class> | ALL]] | [-v] | [-h]
               [-f <file> | -r <file>]  [-y] [-d <dev_spec>]

Example 2 Listing Devices Available to Flash

The following command lists the devices available to be flashed.

example# fwflash -l
List of available devices:
Device[0],  /devices/pci@0,0/pci8086,3595@2/pci8086,32a@0,2/\
            pci15b3,5a46@c/pci15b3,5a44@0:devctl
    Class [IB]
        GUID: System Image - 0002c901081e33b3
              Node         - 0000000000003446
              Port 1       - 0002c901081e33b1
              Port 2       - 0002c901081e33b2
        Firmware revision: 3.3.0002
        No HW information available

Device[1],  /devices/pci@0,0/pci8086,3597@4/pci15b3,6278@0:devctl
    Class [IB]
        GUID: System Image - 0002c9010a99e3b3
              Node         - 0002c9010a99e3b0
              Port 1       - 0002c9010a99e3b1
              Port 2       - 0002c9010a99e3b2
        Firmware revision: 4.8.00c8
        Product           : MTLP25208-CF256T (Lion cub)
        PSID              : MT_00B0000001

Example 3 Flash Upgrading an IB HCA Device

The following command flash upgrades an IB HCA device.

example# fwflash -f ./version.3.2.0000 -d 0
About to update firmware on:
  /devices/pci@1d,700000/pci@1/pci15b3,5a44@0:devctl
Continue (Y/N): Y

Updating . . . . . . . . . . . .
Done.  New image will be active after the system is rebooted.

Note that you are prompted before the upgrading proceeds.

The following command adds the -y option to the preceding command.

example# fwflash -y -f ./version.3.2.0000 -d 0
About to update firmware on:
  /devices/pci@1d,700000/pci@1/pci15b3,5a44@0:devctl

Updating . . . . . . . . . . . .
Done.  New image will be active after the system is rebooted.

Example 4 Reading Device Firmware to File

The command shown below reads the device firmware to a file. The command uses the -y option so that read occurs without prompting.

example# fwflash -y -r /firmware.bin -d 1
About to read firmware on:
         /devices/pci@0,0/pci8086,3596@3/pci15b3,6278@0:devctl
to filename: /firmware.bin

Reading . . .
Done.

Return Values

The fwflash command returns the following values:

0: Success
1: Failure

Attributes

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWfwflash

Notes

The fwflash command supports IB class HCA cards containing either the AMD or the Intel parallel flash parts. The tavor(7D) HCA driver is required.

SunOS 5.10 Last Revised 12 Jun 2007