Chapter 2 Installing Enterprise Agents
2.1 Installing Enterprise Agents Overview
Installing Solstice Enterprise Agents (SEA) on the Solaris operating
system follows Standard Solaris conventions, as described in the following
sections.
The SEA package is divided into two major parts:
2.2 Platforms and Packages
This product is supported on the following platforms:
-
Sparc (Solaris 2.4, 2.5, and 2.6)
-
IA (Solaris 2.4, 2.5, and 2.6)
The runtime product includes the following unique packages:
The following sections describe the details of each package.
2.2.1 SUNWsacom
The SUNWsacom package contains all the configuration files corresponding
to the other three packages. The files in this package are installed in the /root and /var file systems. These files include
configuration files and other common files.
2.2.2 SUNWsasnm
The SUNWsasnm package includes:
-
snmpdx – Master Agent executable
-
init.snmpdx – Startup script file
-
snmpdx.mib – Master Agent MIB file
-
Libraries
2.2.3 SUNWsadmi
Within SUNWsadmi, the package includes:
-
dmispd – DMI Service Provider (SP)
executable
-
DMI libraries – See Table 2–3
-
snmpXdmid – DMI/SNMP mapper executable
-
init.dmi – Startup script file
-
ciinvoke – Script to invoke CI
agents, from init.dmi
-
Script to invoke CI agents – Invoked by ciinvoke
-
dmi_cmd and dmiget –
Command line MI utilities
2.2.4 SUNWmibii
The SUNWmibii package contains the mibiisa MIB II
subagent. The subagent provides MIB II functionality. The functionality provided
by MIB II subagent is the same as that provided by the snmpd
agent released with Domain Manager.
2.2.5 SUNWsasdk
This package contains SNMP Toolkit and the DMI Toolkit to build the
subagents.
SNMP Toolkit contains:
DMI Toolkit includes:
2.3 Installation Procedure
Packages are installed using the pkgadd
command and are removed by the pkgrm command.
Note –
The snmpXdmid must be configured properly in
the Master Agent configuration files.
2.3.1 Remove Existing Packages
Caution –
Before starting your installation procedure, be sure you log
in as root. Then follow the procedures below.
If these packages don't exist, you don't have to remove them.
2.3.2 Add New Packages
With the addition of each package, you receive both the
English and French copyrights, then a series of prompts that you can either
answer specifically or accept the default.
-
Add SUNWmibii:
pkgadd -d . SUNWmibii
-
Add SUNWsasnm:
pkgadd -d . SUNWsasnm
-
Add SUNWsadmi:
pkgadd -d . SUNWsadmi
-
Add SUNWsacom:
pkgadd -d . SUNWsacom
-
Add SUNWsasdk
pkgadd -d . SUNWsasdk
When you add the SUNWsadmi package, the dmispd and snmpXdmid processes start upon reboot
of the system.
The SUNWsacom package consists of two script files; init.dmi and init.snmpdx. The SNMP daemon, snmpdx, is invoked by init.snmpdx. The snmpdx process automatically starts the mibiisa
daemon.
The dmispd process is invoked through the RC script
files when the system is booted, as is snmpdx. The snmpXdmid mapper process is invoked after the dmispd
has been invoked.
Note –
When deleting or adding packages, be sure you follow the order
described above.
2.4 SNMP Default Software Locations
Table 2–1 shows a list of default software locations within SNMP.
Table 2–1 Default SNMP Locations
|
Label
|
Directory
|
|
SEA_SNMPLibrary_Directory
|
/usr/lib
|
|
SEA_SNMPConfiguration_Directory
|
/etc/snmp/conf
|
|
SEA_SNMPMibs_Directory
|
/var/snmp/mib
|
Table 2–2 provides
the list of SNMP component names and their default locations.
Table 2–2 SNMP Package Components
|
Component Name
|
Label/Directory
|
Description
|
|
snmpdx
|
/usr/lib/snmp
|
Master Agent executable
|
|
mibiisa
|
/usr/lib/snmp
|
MIB II snmp daemonpwd
|
|
snmp_trapsend
|
/usr/sbin
|
Utility for sending traps
|
|
mibcodegen
|
/usr/bin
|
Code generator executable
|
|
snmpdx.rsrc
|
SEA_SNMPConfiguration_Directory
|
Master Agent
resource file
|
|
snmpdx.reg
|
SEA_SNMPConfiguration_Directory
|
Registration
file for agents
|
|
snmpdx.acl
|
SEA_SNMPConfiguration_Directory
|
Master Agent
access control file
|
|
snmpd.conf
|
SEA_SNMPConfiguration_Directory
|
SNMPD configuration file
|
|
mibiisa.reg
|
SEA_SNMPConfiguration_Directory
|
MIB II subagent registration file
|
|
mibiisa.rsrc
|
SEA_SNMPConfiguration_Directory
|
MIB II agent resource file
|
|
snmpdx.st
|
SEA_SNMPRun_Time_Directory
|
Master Agent
status file
|
|
libssasnmp.so.1
|
SEA_SNMPLibrary_Directory
|
SSA SDK SNMP
library
|
|
libssagent.so.1
|
SEA_SNMPLibrary_Directory
|
SSA SDK Agent
library
|
|
enterprises.oid
|
SEA_SNMPConfiguration_Directory
|
Default enterprise-name
OID map
|
|
sun.mib
|
SEA_SNMPMibs_Directory
|
Sun MIB
|
|
snmpdx.mib
|
SEA_SNMPMibs_Directory
|
Snmpdx MIB
|
2.5 DMI Default Software Locations
Table 2–3 provides a list of default software locations for the DMI portion of
the product.
Table 2–3 Default Locations for DMI
|
Label
|
Location
|
|
SEA_DMILibrary_Directory
|
/usr/lib
|
|
SEA_DMIConfiguration_Directory
|
/etc/dmi/conf
|
|
SEA_DMIRunTime_Database_Directory
|
/var/dmi/db
|
|
SEA_DMIRunTime_MAP_Directory
|
/var/dmi/map
|
|
SEA_DMIMif_Directory
|
/var/dmi/mif
|
Table 2–4 provides
a list of DMI component names and their default locations.
Table 2–4 DMI Package Components
|
Component name
|
Label/Directory
|
Description
|
|
snmpXdmid
|
/usr/lib/dmi
|
Mapper executable
|
|
dmispd
|
/usr/lib/dmi
|
DMI Service Provider executable
|
|
dmi_cmd
|
/usr/sbin
|
DMI command utility
|
|
dmiget
|
/usr/sbin
|
DMI command utility
|
|
snmpXdmid.conf
|
SEA_DMIConfiguration_Directory
|
Mapper configuration
file
|
|
dmispd.conf
|
SEA_DMIConfiguration_Directory
|
DMI SP configuration
file
|
|
map files
|
SEA_DMIRunTime_MAP_Directory
|
Map files
|
|
libdmi.so.1
|
SEA_DMILibrary_Directory
|
SSA SDK DMI generic library
|
|
libci.so.1
|
SEA_DMILibrary_Directory
|
SSA SDK CI library
|
|
libdmimi.so.1
|
SEA_DMILibrary_Directory
|
SSA SDK MI library
|
|
sp.mif
|
SEA_DMIMif_Directory
|
MIF files
|
|
ciinvoke
|
/etc/dmi/ciagent
|
DMI component interface invocation script
|
PDF 文書ファイルをダウンロードする (575 KB)