Expert Mode Subcommands

Caution - The expert mode subcommands should only be used by qualified

personnel who are knowledgeable about the systems they are managing.

The command line must contain the luxadm -e (expert mode) option and a

subcommand.


  luxadm [options] subcommand pathname

TABLE A-1

Subcommand	Description
`bus_getstate`	Gets and displays the state of the specified bus or the bus controlling the specified device.
`bus_quiesce`	Quiesces the specified bus or the bus controlling the specified device.
`bus_reset`	Resets the specified bus or the bus controlling the specified device.
`bus_resetall`	Resets the specified bus or the bus controlling the specified device, and all devices on that bus.
`bus_unquiesce`	Unquiesces the specified bus or the bus controlling the specified device.
`dev_getstate`	Gets and displays the state of the specified device.
`dev_reset`	Resets the specified device.
`forcelip`	For (LIP) sequence. The ^{ces the link to r}^{einitialize using the Loop Initialize Primitive} Sun Enterprise Network Array only `^forcelip`^{subcommand is supported on the} .

TABLE A-1

Subcommand	Description
`offline`	Takes the specified device offline.
`online`	Puts the specified device online.
`rdls`	Reads the link error status block from a specified device. The `rdls` subcommand also displays the link error status information for the Host Adapter associated with the specified device, if available. The `rdls` subcommand is supported on the Sun Enterprise Network Array only.