.........................Contents


1. Using the luxadm Command 1</>
..Addressing 2
.....Addressing a StorEdge A5000 Disk Array 2
.....Addressing a SPARCstorage Array 3
.....Addressing a SPARCstorage RSM Tray 4
..Subcommand Support Matrix 5
2. luxadm Subcommands 7</>
..Disk LEDs 7
.....Displaying the Current State of a Disk LED 7
.....Setting a Disk LED to the Blink Mode 8
.....Turning Off a Disk LED 9
.....Turning On a Disk LED 10
..Displaying 10
.....Probing for StorEdge A5000 Disk Arrays 10
.....Displaying Enclosure or Device Specific Data 12
.....Displaying inquiry Information 15
..Downloading 17
.....Downloading Firmware 17


...Changing a SPARCstorage Array World Wide Name 18
...Downloading fcode to a FC25/S Host Adapters 19
...Downloading fcode to FC100 Host Adapters 20
Enclosure Services Card 21
...Displaying Environmental Information 21
...Disabling the Alarm 22
...Enabling the Alarm 22
...Setting the Alarm 23
Enclosure and Disk Operations 24
...Renaming a StorEdge A5000 Disk Array 24
...Collecting Performance Statistics 24
...Powering Off an Enclosure or Disk Drive 25
...Powering On Enclosures or Disk Drives 26
...Releasing Disks 26
...Reserving Disks 27
...Setting the Boot Device Variable 28
...Starting Disks 28
...Stopping Disks 29
NVRAM 30
...Enabling and Disabling Fast Writes 30
...Displaying Fast Write Data 30
...Purging Fast Write Data from NVRAM 31
...Flushing NVRAM 32
Removing, Inserting, and Replacing 33
...Removing Devices 33
...Inserting Devices 35
...Replacing Devices 37


3. Hot-Plugging in the StorEdge A5000 Disk Array 39
..Adding a Disk Drive 40
.....Unix File System (UFS) 41
.....Sun Enterprise Volume Manager 42
..Replacing a Disk Drive 43
.....Identifying the Faulty Disk Drive 43
.....UNIX File System (UFS) 43
.....Restoring the UFS File System 47
.....Sun Enterprise Volume Manager 48
..Removing a Disk Drive 53
.....Unix File System (UFS) 53
.....Sun Enterprise Volume Manager 56
A. Expert Mode Subcommands 59
..Index 61