NAME

reconfig - initiate auto-configuration sequence

SYNOPSIS

reconfig

AVAILABILITY

Sun Enterprise 10000 servers only.

DESCRIPTION

Warning:

This command can remap device files and cause the renaming of known devices. Use it with extreme caution.

Execute this command at the dr (1M)shell prompt after a new board has been attached to a running domain to make the board's devices immediately available for use.

reconfig executes the standard Solaris configuration sequence in the target domain. This sequence consists of the following commands, shown here in the proper order: drvconfig(1M), devlinks(1M), disks(1M), ports(1M), and tapes(1M).

EXIT STATUS

reconfig returns a 0 in the dr_return global variable upon success, or a 1 upon failure.

EXAMPLE

dr> reconfig

Reconfiguration of devices in progress...
Reconfiguration completed successfully.

DIAGNOSTICS

Reconfiguration failed

One or more of the Enterprise 10000 domain's reconfiguration commands has failed. Check the /var/adm/messages file on the Enterprise 10000 domain.

NOTES

If DR detects a usage syntax error, it immediately aborts the dr (1M)command, displays the dr (1M)shell prompt, and leaves dr_return unmodified. See dr (1M).

reconfig ( 1M ) SEE ALSO

dr (1M)in this Reference Manual

drvconfig(1M), devlinks(1M), disks(1M), ports(1M), tapes(1M) in man Pages(1M): System Administration Commands of the SunOS Reference Manual.