以 PDF 格式下载本书 (256 KB)

Driver Entry Points

• Intro(9E) - introduction to device driver entry points
• A
  • aread(9E) - asynchronous read from a device
  • attach(9E) - attach a device to the system, or resume it
  • awrite(9E) - asynchronous write to a device
• B
• C
  • chpoll(9E) - poll entry point for a non-STREAMS character driver
  • close(9E) - relinquish access to a device
  • csx_event_handler(9E) - PC Card driver event handler
• D
  • detach(9E) - detach a device
  • devmap(9E) - validate and translate virtual mapping for memory mapped device
  • devmap_access(9E) - device mapping access entry point
  • devmap_contextmgt(9E) - driver callback function for context management
  • devmap_dup(9E) - device mapping duplication entry point
  • devmap_map(9E) - device mapping create entry point
  • devmap_unmap(9E) - device mapping unmap entry point
  • dump(9E) - dump memory to device during system failure
• E
• F
  • _fini(9E) - loadable module configuration entry points
• G
  • getinfo(9E) - get device driver information
• H
• I
  • identify(9E) - determine if a driver is associated with a device
  • _info(9E) - loadable module configuration entry points
  • _init(9E) - loadable module configuration entry points
  • ioctl(9E) - control a character device
• J
• K
  • ks_update(9E) - dynamically update kstats
• L
• M
  • mapdev_access(9E) - device mapping access entry point
  • mapdev_dup(9E) - device mapping duplication entry point
  • mapdev_free(9E) - device mapping free entry point
  • mmap(9E) - check virtual mapping for memory mapped device
• N
• O
  • open(9E) - gain access to a device
• P
  • pm(9E) - power management properties
  • power(9E) - power a device attached to the system
  • print(9E) - display a driver message on system console
  • probe(9E) - determine if a non-self-identifying device is present
  • prop_op(9E) - report driver property information
  • put(9E) - receive messages from the preceding queue
• Q
• R
  • read(9E) - read data from a device
• S
  • segmap(9E) - map device memory into user space
  • srv(9E) - service queued messages
  • strategy(9E) - perform block I/O
• T
  • tran_abort(9E) - abort a SCSI command
  • tran_destroy_pkt(9E) - SCSI HBA packet preparation and deallocation
  • tran_dmafree(9E) - SCSI HBA DMA deallocation entry point
  • tran_getcap(9E) - get/set SCSI transport capability
  • tran_init_pkt(9E) - SCSI HBA packet preparation and deallocation
  • tran_reset(9E) - reset a SCSI bus or target
  • tran_reset_notify(9E) - request to notify SCSI target of bus reset
  • tran_setcap(9E) - get/set SCSI transport capability
  • tran_start(9E) - request to transport a SCSI command
  • tran_sync_pkt(9E) - SCSI HBA memory synchronization entry point
  • tran_tgt_free(9E) - request to free HBA resources allocated on behalf of a target
  • tran_tgt_init(9E) - request to initialize HBA resources on behalf of a particular target
  • tran_tgt_probe(9E) - request to probe SCSI bus for a particular target
• U
• V
• W
  • write(9E) - write data to a device
• X
• Y
• Z