NAME

Intro, intro - introduction to device driver entry points

DESCRIPTION

Section 9E describes the entry-point routines a developer may include in a device driver. These are called entry-point because they provide the calling and return syntax from the kernel into the driver. Entry-points are called, for instance, in response to system calls, when the driver is loaded, or in response to STREAMS events.

Kernel functions usable by the driver are described in section 9F.

In this section, reference pages contain the following headings:

NAME describes the routine's purpose.

SYNOPSIS summarizes the routine's calling and return syntax.

INTERFACE LEVEL describes any architecture dependencies. It also indicates whether the use of the entry point is required, optional, or discouraged.

ARGUMENTS describes each of the routine's arguments.

DESCRIPTION provides general information about the routine.

RETURN VALUES describes each of the routine's return values.

SEE ALSO gives sources for further information.

Overview of Driver Entry-Point Routines

By convention, a prefix string is added to the driver routine names. For a driver with the prefix prefix, the driver code may contain routines named prefixopen, prefixclose, prefixread, prefixwrite, and so forth. All global variables associated with the driver should also use the same prefix.

and Naming Conventions

All routines and data should be declared as static.

Every driver MUST include <sys/ddi.h> and <sys/sunddi.h>, in that order, and after all other include files.

The following table summarizes the STREAMS driver entry points described in this section.

Routine       Type
put           DDI/DKI
srv           DDI/DKI

The following table summarizes the driver entry points described in this section.

Routine                    Type

_fini

Solaris DDI

_info

Solaris DDI

_init

Solaris DDI

aread

Solaris DDI

attach

Solaris DDI

awrite

Solaris DDI

chpoll

DDI/DKI

close

DDI/DKI

detach

Solaris DDI

devmap

Solaris DDI

devmap_access

Solaris DDI

devmap_contextmgt

Solaris DDI

devmap_dup

Solaris DDI

devmap_map

Solaris DDI

devmap_unmap

Solaris DDI

dump

Solaris DDI

getinfo

Solaris DDI

identify

Solaris DDI

ioctl

DDI/DKI

ks_update

Solaris DDI

mapdev_access

Solaris DDI

mapdev_dup

Solaris DDI

mapdev_free

Solaris DDI

mmap

DKI only

open

DDI/DKI

power

Solaris DDI

print

DDI/DKI

probe

Solaris DDI

prop_op

Solaris DDI

read

DDI/DKI

segmap

DKI only

strategy

DDI/DKI

tran_abort

Solaris DDI

tran_destroy_pkt

Solaris DDI

tran_dmafree

Solaris DDI

tran_getcap

Solaris DDI

tran_init_pkt

Solaris DDI

tran_reset

Solaris DDI

tran_reset_notify

Solaris DDI

tran_setcap

Solaris DDI

tran_start

Solaris DDI

tran_sync_pkt

Solaris DDI

tran_tgt_free

Solaris DDI

tran_tgt_init

Solaris DDI

tran_tgt_probe

Solaris DDI

write

DDI/DKI

The following table lists the error codes returned by a driver routine when it encounters an error. The error values are listed in alphabetic order and are defined in <sys/errno.h>. In the driver open(9E), close(9E), ioctl(9E), read (9E),and write(9E) routines, errors are passed back to the user by returning the value. In the driver strategy(9E) routine, errors are passed back to the user by setting the b_error member of the buf(9S) structure to the error code. For STREAMS ioctl routines, errors should be sent upstream in an M_IOCNAK message. For STREAMS read and write routines, errors should be sent upstream in an

M_ERROR message. The driver print routine should not return an error code because the function that it calls, cmn_err(9F), is declared as void (no error is returned).

Error

Use in these

Value........Error Description......Driver Routines (9E)

EAGAIN

Kernel resources, such as the buf struc-

open, ioctl, read, write,

ture or cache memory, are not available

                                                        strategy

at this time (device may be busy, or the

system resource is not available).

EFAULT

An invalid address has been passed as

open, close, ioctl, read,

an argument; memory addressing error.

                                                        write, strategy
EINTR       Sleep interrupted by signal.                open, close, ioctl, read,
                                                        write, strategy
EINVAL      An invalid argument was passed to the

open, ioctl, read, write,

routine.

                                                        strategy

EIO

A device error occurred; an error condi-

open, close, ioctl, read,

tion was detected in a device status

                                                        write, strategy

register (the I/O request was valid, but

an error occurred on the device).

ENXIO

An attempt was made to access a device

open, close, ioctl, read,

or subdevice that does not exist (one

                                                        write, strategy

that is not configured); an attempt was

made to perform an invalid I/O opera-

tion; an incorrect minor number was

specified.

EPERM

A process attempting an operation did

open, ioctl, read, write,

not have required permission.

                                                        close

EROFS

An attempt was made to open for writ-

open

ing a read-only device.

The table below cross references error values to the driver routines from which the error values can be returned.

			read ,write,
open	close	ioctl	and strategy
EAGAIN	EFAULT	EAGAIN	EAGAIN
EFAULT	EINTR	EFAULT	EFAULT
EINTR	EIO	EINTR	EINTR
EINVAL	ENXIO	EINVAL	EINVAL
EIO		EIO	EIO
ENXIO		ENXIO	ENXIO
EPERM EROFS		EPERM

Name                            Description

aread (9E)

asynchronous read from a device

attach(9E)

attach a device to the system, or resume it

awrite(9E)

asynchronous write to a device

chpoll(9E)

poll entry point for a non-STREAMS character driver

close(9E)

relinquish access to a device

csx_event_handler(9E)

PC Card driver event handler

detach(9E)

detach a device

devmap(9E)

validate and translate virtual mapping for memory

mapped device

devmap_access(9E)

device mapping access entry point

devmap_contextmgt(9E)

driver callback function for context management

devmap_dup (9E)

device mapping duplication entry point

devmap_map(9E)

device mapping create entry point

devmap_unmap(9E)

device mapping unmap entry point

dump(9E)

dump memory to device during system failure

_fini(9E)

loadable module configuration entry points

getinfo(9E)

get device driver information

identify(9E)

determine if a driver is associated with a device

_info(9E)

See _fini(9E)

_init(9E)

See _fini(9E)

ioctl(9E)

control a character device

ks_update(9E)

dynamically update kstats

mapdev_access(9E)

device mapping access entry point

mapdev_dup (9E)

device mapping duplication entry point

mapdev_free(9E)

device mapping free entry point

mmap(9E)

check virtual mapping for memory mapped device

open(9E)

gain access to a device

pm (9E)

power management properties

power(9E)

power a device attached to the system

print(9E)

display a driver message on system console

probe(9E)

determine if a non-self-identifying device is present

prop_op(9E)

report driver property information

put(9E)

receive messages from the preceding queue

read (9E)

read data from a device

segmap (9E)

map device memory into user space

srv(9E)

service queued messages

strategy(9E)

perform block I/O

tran_abort(9E)

abort a SCSI command

tran_destroy_pkt(9E)

See tran_init_pkt(9E)

tran_dmafree(9E)

SCSI HBA DMA deallocation entry point

tran_getcap(9E)

get/set SCSI transport capability

tran_init_pkt(9E)

SCSI HBA packet preparation and deallocation

tran_reset(9E)

reset a SCSI bus or target

tran_reset_notify(9E)

request to notify SCSI target of bus reset

tran_setcap(9E)

See tran_getcap(9E)

tran_start(9E)

request to transport a SCSI command

tran_sync_pkt(9E)

SCSI HBA memory synchronization entry point

tran_tgt_free(9E)

request to free HBA resources allocated on behalf of a

target

tran_tgt_init(9E)

request to initialize HBA resources on behalf of a partic-

ular target

tran_tgt_probe(9E)

request to probe SCSI bus for a particular target

write(9E)

write data to a device