Hardware Installation Information

4

This chapter provides pointers to the appropriate hardware installation instructions for your SPARCcluster High Availability configuration. Use the following table to locate specific information in this chapter.

*SPARCcluster High Availability Hardware Installation*	*page 4-1*
*SPARCstation 4 Installation*	*page 4-2*
*SPARCcenter 2000 Installation*	*page 4-2*
*SPARCserver 1000 Installation*	*page 4-3*
*SPARCstorage Arrays Installation*	*page 4-3*
*Terminal Concentrator Installation*	*page 4-4*

4.1 SPARCcluster High Availability Hardware Installation

After planning your configuration using the information in Chapter 3, "Installation Planning," you are ready to install the hardware. The documentation necessary to set up and install the SPARCcluster High Availability configuration is listed in Table 4-1.

Table 4-1

Title	Part Number
*SPARCcluster High Availability Server Hardware Planning and Installation*	802-3510
*SPARCcluster High Availability Server Service Manual*	802-3512

4.2 SPARCstation 4 Installation

The documentation necessary to set up and configure the SPARCstation 4 Administration Workstation is listed in Table 4-2.

Table 4-2

Title	Part Number
*SPARCstation 4 Hardware Setup Instructions*	802-1900
*SPARCstation 4 Installation Guide*	802-1523
*Twisted-Pair Ethernet Link Test (10Base-T)*	801-6184
*Specifications - SPARCstation 4 System*	802-1526
*SPARCstation 4 Software installation Note*	802-2052

4.3 SPARCcenter 2000 Installation

If your configuration includes SPARCcenter 2000s, you may need some or all of the documentation listed in Table 4-3.

Table 4-3

Title	Part Number
*SPARCcenter 2000 Binder Set*	825-1509
- *SPARCcenter 2000 Installation Manual*	800-6975
- *SPARCcenter 2000 Storage Devices User's Guide*	800-7009
- *SPARCcenter 2000 Service Manual*	801-2007
- *SPARCcenter 2000 Regulatory Compliance Manual*	801-3051

4.4 SPARCserver 1000 Installation

If you configuration includes SPARCserver 1000s, you may need some or all of the documentation listed in Table 4-4.

Table 4-4

Title	Part Number
*SPARCserver 1000 Binder Set*	825-1725
- *SPARCserver 1000 System Installation Manual*	801-2893
- *SPARCserver 1000 Storage Devices User's Guide*	801-2198
- *SPARCserver 1000 System Service Manual*	801-2895
- *SPARCserver 1000 Regulatory Compliance Manual*	801-2892

4.5 SPARCstorage Arrays Installation

A listing of other documentation you may need to configure SPARCstorage Arrays is listed in Table 4-5.

Table 4-5

Title	Part Number
*SPARCstorage Array Model 100 Hardware Binder Set*	825-2513
- *SPARCstorage Array Model 100 Installation Manual*	801-2205
- *SPARCstorage Array Model 100 Service Manual*	801-2206
- *SPARCstorage Array Model 100 Compliance Manual*	801-7103

4.6 Terminal Concentrator Installation

A listing of the documentation needed to set up and configure the terminal concentrator is listed in Table 4-6.

Table 4-6

Title	Part Number
*SPARCcluster High Availability Server Hardware Planning and Installation* *Terminal Concentrator Binder Set*	802-3510

The procedure for setting up security on the terminal concentrator is documented in Appendix B, "Terminal Concentrator Security."