Innerhalb
Nach weiteren Dokumenten suchen
Support-Ressourcen
| Dieses Buch im PDF-Format herunterladen
Permuted Index
3
How to Use this Index
- This permuted index provides an alphabetized list of words (except variables) in all error messages documented in this book. Pick an important word from the message you see, and look it up in the listing below. Then read backwards to the first word on the line, and look up that word in the Error Messages chapter, or turn to the page number that appears at the end of line.
Alphabetical Index
- ***** FILE SYSTEM WAS MODIFIED ***** 7
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114
- Unmatched ' 118
- bad trap = number 22
- Soft error rate (retries = number) during writing was too high 107
- ***** FILE SYSTEM WAS MODIFIED ***** 7
- WARNING: Unable to repair the / filesystem. Run fsck 123
- ** Phase 1 - Check Blocks and Sizes 8 ** Phase 1b - Rescan For More DUPS 8 ** Phase 2 - Check Pathnames 9 ** Phase 3 - Check Connectivity 9 ** Phase 4 - Check Reference Counts 10 ** Phase 5 - Check Cyl groups 10
- operation failed [error 185], unknown group error 0, variable 92
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54 lockd[number]: create_client: no name for inet address 0xnumber 67
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- ** Phase 1 - Check Blocks and Sizes 8
- operation failed [error 185], unknown group error 0, variable 92
- ** Phase 1b - Rescan For More DUPS 8 ** Phase 2 - Check Pathnames 9 ** Phase 3 - Check Connectivity 9
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- admintool: Received communication service error 4 13
- ** Phase 4 - Check Reference Counts 10
- WARNING: processor level 4 interrupt not serviced 122
- 451 timeout waiting for input during variable 11
- ** Phase 5 - Check Cyl groups 10
- 550 variable... Host unknown 11 550 variable... User unknown 12 554 variable... Local configuration error 12 A command window has exited because its child exited. 13
- automount[number]: variable: Not a directory 17
- Is a directory 61
- Not a directory 88
- Please specify a recipient. 97
- Mail Tool is confused about the state of your Mail File. 70
- data access exception 35
- Graphics Adapter device /dev/fb is of unknown type 49 Bad address 18
- No such device or address 86
- lockd[number]: create_client: no name for inet address 0xnumber 67
- Memory address alignment 71
- LINK COUNT FILE I=i OWNER=o MODE=m
- SIZE=s MTIME=t COUNT... . ADJUST? 66
- automountd[number]: No network locking
- on variable: contact admin to install server change 16
- WARNING: No network locking on variable: contact admin to install server change 121
- admintool: Received communication service error 4 13
- Memory address alignment 71
- Cannot allocate colormap entry for "variable" 25
- PARTIALLY ALLOCATED INODE I=number . CLEAR? 95
- kmem_free block already free 62
- mount: /dev/dsk/variable is already mounted, /variable is busy, or... 72
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED INCONSISTENCY: 113
- WARNING: Clock gained number days - CHECK AND RESET THE DATE! 113 WARNING: TOD clock not initialized - CHECK AND RESET THE DATE! 113
- ** Phase 1 - Check Blocks and Sizes 113
- This mail file has been changed by another mail reader. 115
- answerbook: XView error: NULL pointer passed to xv_set 14
- Operation not applicable 93
- share_nfs: /home: Operation not applicable 106
- Who are you? 125
- I can't read your attachments. What mailer are you using? 52
- ERROR: missing file arg (cm3) 40
- Arg list too long 14
- Invalid argument 59
- Argument out of domain 15
- cd: Too many arguments 27
- Arguments too long 16
- Timeout waiting for ARP/RARP packet 116
- No such user as variable - cron entries not created 88
- assertion failed: variable, file variable, line number 16
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- bad module/chip at: variable 20
- statd: cannot talk to statd at variable 108
- I can't read your attachments. What mailer are you using? 52
- NIS+ authentication failure 80
- Xlib: Client is not authorized to connect to Server 127
- automount[number]: variable: Not a directory 17 automountd[number]: No network locking on variable: contact admin to install 16
- automountd[number]: server variable not responding 17
- No buffer space available 80
- No default media available 81 No record locks available 83
- Bad address 18
- EXCESSIVE BAD BLKS I=number . CONTINUE? 42
- Bad file number 19
- nfs_server: bad getargs for number/number 77 number BAD I=number 19
- cpio: Bad magic number/header. 34 bad module/chip at: variable 20 BAD SUPER BLOCK: variable 20 BAD TRAP 21
- bad trap = number 22 BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 18
- mail: Your mailfile was found to be corrupted (Content-length mismatch). 70
- INCORRECT BLOCK COUNT I=number (should be number) . CORRECT? 55
- The system will be shut down in number minutes 115
- Recipient names must be specified 99
- A command window has exited because its child exited. 13
- Text is lost because the maximum edit log size has been exceeded. 113
- This mail file has been changed by another mail reader. 115
- Text is lost because the maximum edit log size has been exceeded. 113
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114
- /bin/sh: variable: too big 22 nfs mount: Couldn't bind to reserved port 75
- /bin/sh: variable: too big 22
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- EXCESSIVE BAD BLKS I=number . CONTINUE? 42 EXCESSIVE DUP BLKS I=number . CONTINUE? 42 kmem_free block already free 62
- INCORRECT BLOCK COUNT I=number (should be number)
- . CORRECT? 55
- Block device required 22
- BAD SUPER BLOCK: variable 20
- ** Phase 1 - Check Blocks and Sizes 20
- Boot device: /iommu/sbus/variable/variable/sd@3,0 23 Broadcast Message from root (pts/number) on server [date] 23
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126
- Broken pipe 24
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- No buffer space available 80
- SCSI bus DATA IN phase parity error 103 Bus Error 24
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- Can't create public message device (Device busy) 25
- Device busy 36
- dumptm: Cannot open '/dev/rmt/variable': Device busy 39
- nfs mount: mount: variable: Device busy 76
- nfs umount: variable: is busy 78
- mount: /dev/dsk/variable is already mounted, /variable is busy, or... 72
- This mail file has been changed by another mail reader. 115
- Connection closed by foreign host. 29
- Read error from network: Connection reset by peer 98
- Xlib: connection to "variable:0.0" refused by server 128
- le0: No carrier - cable disconnected or hub link test disabled? 128
- le0: No carrier - transceiver cable problem? 128
- Interrupted system call 59
- Cannot allocate colormap entry for "variable" 25
- ln: cannot create /dev/fb: Read-only file system 67
- INIT: Cannot create /var/adm/utmp or /var/adm/utmpx 57
- XView warning: Cannot load font set 'variable' (Font Package) 129
- dumptm: Cannot open '/dev/rmt/variable': Device busy 39 setmnt: Cannot open /etc/mnttab for writing 106 statd: cannot talk to statd at variable 108
- /dev/rdsk/variable: CAN'T CHECK FILE SYSTEM. 37
- ypwhich: can't communicate with ypbind 130 mailtool: Can't create dead letter: Permission denied 69
- Can't create public message device (Device busy) 25 Can't invoke /etc/init, error number 26
- fsck: Can't open /dev/dsk/variable 48
- ld.so.1: variable: fatal: variable: can't open file: errno=2 64
- I can't read your attachments. What mailer are you using? 52
- fsck: Can't stat /dev/dsk/variable 48 can't synchronize with hayes 27
- ie0: no carrier 53 le0: No carrier - cable disconnected or hub link test disabled? 65 le0: No carrier - transceiver cable problem? 65
- cd: Too many arguments 27
- No network locking on variable: contact
- admin to install server change 16
- WARNING: No network locking on variable:
- contact admin to install server change 121
- This mail file has been changed by another mail reader. 115
- Channel number out of range 27
- WARNING: Clock gained number days - CHECK AND RESET THE DATE! 27 WARNING: TOD clock not initialized - CHECK AND RESET THE DATE! 27
- ** Phase 1 - Check Blocks and Sizes 27 ** Phase 3 - Check Connectivity 27 ** Phase 5 - Check Cyl groups 27
- /dev/rdsk/variable: CAN'T CHECK FILE SYSTEM. 37
- ** Phase 2 - Check Pathnames 37 ** Phase 4 - Check Reference Counts 37
- tar: directory checksum error 112
- A command window has exited because its child exited. 13
- No child processes 81
- chmod: ERROR: invalid mode 28
- mailtool: Could not initialize the Classing Engine 69
- BAD/DUP FILE I=i OWNER=o MODE=m
- SIZE=s MTIME=t . CLEAR? 18
- PARTIALLY ALLOCATED INODE I=number . CLEAR? 95
- UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119
- Xlib: Client is not authorized to connect to Server 127
- WARNING: Clock gained number days - CHECK AND
- RESET THE DATE! 121
- WARNING: TOD clock not initialized - CHECK AND RESET THE DATE! 123 Connection closed. 29
- No shell . Connection closed 84
- Connection closed by foreign host. 29 [Connection closed. Exiting] 30
- ERROR: missing file arg (cm3) 40
- Cannot allocate colormap entry for "variable" 25 Invalid null command 60
- Command not found 28
- A command window has exited because its child exited. 13
- ypwhich: can't communicate with ypbind 130
- admintool: Received communication service error 4 13 554 variable... Local configuration error 12
- host name configuration error 51
- Mail Tool is confused about the state of your Mail File. 70
- Xlib: Client is not authorized to connect to Server 127
- Connection closed. 29
- No shell . Connection closed 84
- Connection closed by foreign host. 29 [Connection closed. Exiting] 30
- error: DPS has not initialized or server connection failed 40
- Connection refused 30
- Read error from network: Connection reset by peer 98
- Connection timed out 30
- X connection to variable:0.0 broken (explicit kill
- or server shutdown). 126
- Xlib: connection to "variable:0.0" refused by server 128
- /usr/openwin/bin/xinit: connection to X server lost 120
- ** Phase 3 - Check Connectivity 120
- Not on system console 91
- console login: ^J^M^Q^K^K^P 31
- automountd[number]: No network locking on variable: contact admin to install server change 16
- WARNING: No network locking on variable: contact admin to install server change 121
- mail: Your mailfile was found to be corrupted (Content-length mismatch). 70
- EXCESSIVE BAD BLKS I=number . CONTINUE? 42 EXCESSIVE DUP BLKS I=number . CONTINUE? 42
- undefined control 118
- core dumped 32
- INCORRECT BLOCK COUNT I=number
- (should be number) . CORRECT? 55
- mail: Your mailfile was found to be corrupted (Content-length mismatch). 70
- mailtool: Could not initialize the Classing Engine 69
- Could not initialize tooltalk (tt_open): TT_ERR_NOMP 33 Could not start new viewer 33
- nfs mount: Couldn't bind to reserved port 75
- LINK COUNT FILE I=i OWNER=o
- MODE=m SIZE=s MTIME=t COUNT... . ADJUST? 66
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s
- MTIME=t COUNT... . ADJUST? 66
- INCORRECT BLOCK COUNT I=number (should be number) . CORRECT? 55
- ** Phase 4 - Check Reference Counts 55
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- cpio: Bad magic number/header. 34
- mailtool: Can't create dead letter: Permission denied 69 ln: cannot create /dev/fb: Read-only file system 67
- Can't create public message device (Device busy) 25
- INIT: Cannot create /var/adm/utmp or /var/adm/utmpx 57
- lockd[number]: create_client: no name for inet address 0xnumber 67
- No such user as variable - cron entries not created 67
- No such user as variable - cron entries not created 67
- Cross-device link 34
- ** Phase 5 - Check Cyl groups 34
- Soft error rate (number%) during writing was too high 106
- data access exception 35 Data fault 35
- SCSI bus DATA IN phase parity error 103 esp0: data transfer overrun 41
- Value too large for defined data type 120
- Broadcast Message from root (pts/number) on server [date] 23
- WARNING: Clock gained number days -
- CHECK AND RESET THE DATE! 23
- WARNING: TOD clock not initialized -
- CHECK AND RESET THE DATE! 23
- WARNING: Clock gained number days - CHECK AND RESET THE DATE! 121
- mailtool: Can't create dead letter: Permission denied 69
- File locking deadlock 45
- Deadlock situation detected/avoided 36
- Password does not decrypt secret key for unix.uid@variable 96
- No default media available 81
- Value too large for defined data type 120
- filemgr: mknod: Permission denied 45
- mailtool: Can't create dead letter: Permission denied 69
- Permission denied 96
- No message of desired type 83
- LL105W: Protocol error detected. 66
- Deadlock situation detected/avoided 36
- ROOT LOGIN /dev/console 102
- fsck: Can't open /dev/dsk/variable 48 fsck: Can't stat /dev/dsk/variable 48
- mount: /dev/dsk/variable is already mounted, /variable
- is busy, or... 72
- mount: the state of /dev/dsk/variable is not okay 73
- InitOutput: Error loading module for /dev/fb 58
- Graphics Adapter device /dev/fb is of unknown type 49
- ln: cannot create /dev/fb: Read-only file system 67
- Inappropriate ioctl for device 55
- NFS write error on host variable: No space left on device. 79
- No space left on device 85
- No such device 85
- Device busy 36
- Can't create public message device (Device busy) 25
- dumptm: Cannot open '/dev/rmt/variable': Device busy 39
- nfs mount: mount: variable: Device busy 76
- Graphics Adapter device /dev/fb is of unknown type 49
- Can't create public message device (Device busy) 25
- Boot device: /iommu/sbus/variable/variable/sd@3,0 23
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- No such device or address 86 Block device required 22
- su: 'su root' failed for variable on /dev/pts/number 109
- su: 'su root' succeeded for variable on /dev/pts/number 110
- ROOT LOGIN /dev/pts/number FROM variable 102
- /dev/rdsk/variable: CAN'T CHECK FILE SYSTEM. 37 /dev/rdsk/variable: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. 37
- tar: /dev/rmt/0: No such file or directory 111
- dumptm: Cannot open '/dev/rmt/variable': Device busy 39
- automount[number]: variable: Not a directory 17
- /home/variable: No such file or directory 50
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- Is a directory 61
- /net/variable: No such file or directory 73
- No such file or directory 86
- Not a directory 88
- tar: /dev/rmt/0: No such file or directory 111
- tar: directory checksum error 112 No directory! Logging in with home=/ 82 Directory not empty 38
- rmdir: variable: Directory not empty 101
- le0: No carrier - cable disconnected or hub link test disabled? 101
- Disc quota exceeded 38
- le0: No carrier - cable disconnected or hub link test disabled? 38
- fd0: unformatted diskette or no diskette in the drive 44
- fd0: unformatted diskette or no diskette in the drive 44
- Password does not decrypt secret key for unix.uid@variable 96
- mount: mount-point /variable does not exist. 73
- Argument out of domain 15
- no such map in server's domain 87
- ypbind[number]: NIS server for domain "variable" OK 129
- ypbind[number]: NIS server not responding for domain "variable"; still trying 130
- Host is down 50
- Network is down 74
- The system will be shut down in number minutes 115
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114
- error: DPS has not initialized or server connection failed 40
- fd0: unformatted diskette or no diskette in the drive 44
- Unable to install/attach driver 'variable' 118
- core dumped 32
- dumptm: Cannot open '/dev/rmt/variable': Device busy 39
- EXCESSIVE DUP BLKS I=number . CONTINUE? 42 number DUP I=number 39
- DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f . REMOVE? 39
- ** Phase 1b - Rescan For More DUPS 8 451 timeout waiting for input during variable 11
- Soft error rate (number%) during writing was too high 106
- Soft error rate (retries = number) during writing was too high 107
- Text is lost because the maximum edit log size has been exceeded. 113
- Directory not empty 38
- rmdir: variable: Directory not empty 101
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- mailtool: Could not initialize the Classing Engine 69
- Not enough space 88
- No such user as variable - cron entries not created 88
- Cannot allocate colormap entry for "variable" 25
- ld.so.1: variable: fatal: variable: can't open file: errno=2 64
- 554 variable... Local configuration error 12
- Bus Error 24
- Exec format error 43
- host name configuration error 51
- I/O error 60
- kernel read error 61
- le0: Memory error! 64 rx framing error 102
- SCSI bus DATA IN phase parity error 103
- tar: directory checksum error 112
- tar: tape write error 112
- operation failed [error 185], unknown group error 0, variable 92
- operation failed [error 185], unknown group error 0, variable 92 XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127 xterm: fatal IO error 32 (Broken Pipe) or KillClient on X
- server "variable:0.0" 128
- admintool: Received communication service error 4 13
- Can't invoke /etc/init, error number 26
- LL105W: Protocol error detected. 66
- error: DPS has not initialized or server connection failed 40
- Read error from network: Connection reset by peer 98
- chmod: ERROR: invalid mode 28
- InitOutput: Error loading module for /dev/fb 58
- ERROR: missing file arg (cm3) 40
- answerbook: XView error: NULL pointer passed to xv_set 14
- NFS write error on host variable: No space left on device. 79 Soft error rate (number%) during writing was too high 106
- Soft error rate (retries = number) during writing was too high 107 ERROR [SCCS/s.variable]: 'SCCS/p.variable'
- nonexistent (ut4) 41
- ERROR [SCCS/s.variable]: writable 'variable' exists (ge4) 41
- ld.so.1: variable: fatal: relocation error: symbol not found: variable 63
- esp0: data transfer overrun 41
- Can't invoke /etc/init, error number 26
- setmnt: Cannot open /etc/mnttab for writing 106
- ie0: Ethernet jammed 52
- Event not found 42
- Disc quota exceeded 38
- Text is lost because the maximum edit log size has been exceeded. 113
- WARNING: /tmp: File system full, swap space limit exceeded 122
- data access exception 35
- EXCESSIVE BAD BLKS I=number . CONTINUE? 42 EXCESSIVE DUP BLKS I=number . CONTINUE? 42 Exec format error 43
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- mount: mount-point /variable does not exist. 73
- File exists 44
- ERROR [SCCS/s.variable]: writable 'variable' exists (ge4) 41
- A command window has exited because its child exited. 13
- A command window has exited because its child exited. 13 [Connection closed. Exiting] 30
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126 The SCSI bus is hung. Perhaps an external device is turned off. 114
- error: DPS has not initialized or server connection failed 40
- operation failed [error 185], unknown group error 0, variable 92
- su: 'su root' failed for variable on /dev/pts/number 109 NFS read failed for server variable 76
- NFS getattr failed for server variable: RPC: Timed out 75 NFS write failed for server variable: RPC: Timed out 79
- SCSI transport failed: reason 'reset' 103
- assertion failed: variable, file variable, line number 16
- NIS+ authentication failure 80
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient
- on X server "variable:0.0" 128
- ld.so.1: variable: fatal: relocation error: symbol not found: variable 63 ld.so.1: variable: fatal: variable: can't open file: errno=2 64
- Data fault 35
- Segmentation Fault 104
- fd0: unformatted diskette or no diskette in the drive 44
- Mail Tool is confused about the state of your Mail File. 70
- ERROR: missing file arg (cm3) 40
- ld.so.1: variable: fatal: variable: can't open file: errno=2 64
- File exists 44
- Stale NFS file handle 107 This mail file has been changed by another mail reader. 115
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t
- COUNT... . ADJUST? 66
- BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t .
- CLEAR? 18
- UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t .
- CLEAR? 119
- File locking deadlock 45 File name too long 45
- Bad file number 19
- /home/variable: No such file or directory 50
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- /net/variable: No such file or directory 73
- No such file or directory 86
- tar: /dev/rmt/0: No such file or directory 111 assertion failed: variable, file variable, line number 16
- /dev/rdsk/variable: CAN'T CHECK FILE SYSTEM. 37 ln: cannot create /dev/fb: Read-only file system 67
- Read-only file system 98
- WARNING: /tmp: File system full, swap space limit exceeded 122
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46
- ***** FILE SYSTEM WAS MODIFIED ***** 7
- syncing file systems... 110
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED
- INCONSISTENCY: 113
- File table overflow 47 File too large 47
- DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f . REMOVE? 39
- filemgr: mknod: Permission denied 45
- inetd: Too many open files 57
- Too many open files 117
- WARNING: Unable to repair the / filesystem. Run fsck 123
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED
- INCONSISTENCY: 113
- XView warning: Cannot load font set 'variable' (Font Package) 129
- XView warning: Cannot load font set 'variable' (Font Package) 129
- Timeout waiting for ARP/RARP packet 116
- nfs_server: bad getargs for number/number 77
- Value too large for defined data type 120
- InitOutput: Error loading module for /dev/fb 58
- Inappropriate ioctl for device 55
- ypbind[number]: NIS server for domain "variable" OK 129
- ypbind[number]: NIS server not responding for domain "variable"; still trying 130
- lockd[number]: create_client: no name for inet address 0xnumber 67
- 451 timeout waiting for input during variable 11 ** Phase 1b - Rescan For More DUPS 11
- Cannot allocate colormap entry for "variable" 25
- su: 'su root' failed for variable on /dev/pts/number 109
- su: 'su root' succeeded for variable on /dev/pts/number 110
- NFS read failed for server variable 76
- NFS getattr failed for server variable: RPC: Timed out 75 NFS write failed for server variable: RPC: Timed out 79
- Protocol wrong type for socket 97
- Password does not decrypt secret key for unix.uid@variable 96
- setmnt: Cannot open /etc/mnttab for writing 106
- Connection closed by foreign host. 29
- Exec format error 43
- Command not found 28
- Event not found 42
- not found 89
- xinit: not found 127
- ld.so.1: variable: fatal: relocation error: symbol not found: variable 63
- mail: Your mailfile was found to be corrupted (Content-length mismatch). 70
- rx framing error 102
- kmem_free block already free 62
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- Reset tty pgrp from number to number 100 Read error from network: Connection reset by peer 98
- Broadcast Message from root (pts/number) on server [date] 23
- ROOT LOGIN /dev/pts/number FROM variable 102
- sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- WARNING: Unable to repair the / filesystem. Run fsck 123
- fsck: Can't open /dev/dsk/variable 48 fsck: Can't stat /dev/dsk/variable 48
- /dev/rdsk/variable: UNEXPECTED INCONSISTENCY;
- RUN fsck MANUALLY. 37
- WARNING: /tmp: File system full, swap space limit exceeded 122
- WARNING: Clock gained number days - CHECK AND RESET THE DATE! 121
- ERROR [SCCS/s.variable]: writable 'variable' exists (ge4) 41
- nfs_server: bad getargs for number/number 77
- NFS getattr failed for server variable: RPC: Timed out 75 giving up 49
- mount: giving up on: /variable 72
- Graphics Adapter device /dev/fb is of unknown type 49
- operation failed [error 185], unknown group error 0, variable 92
- group.org_dir: NIS+ servers unreachable 49
- ** Phase 5 - Check Cyl groups 49
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED INCONSISTENCY: 113
- Stale NFS file handle 107
- lp hang 68
- sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- This mail file has been changed by another mail reader. 115
- Text is lost because the maximum edit log size has been exceeded. 113
- A command window has exited because its child exited. 13
- error: DPS has not initialized or server connection failed 40
- can't synchronize with hayes 27
- Soft error rate (number%) during writing was too high 106
- Soft error rate (retries = number) during writing was too high 107
- No directory! Logging in with home=/ 82
- share_nfs: /home: Operation not applicable 106
- /home/variable: No such file or directory 50
- Connection closed by foreign host. 29
- No route to host 84
- Host is down 50 host name configuration error 51
- NFS write error on host variable: No space left on device. 79 550 variable... Host unknown 11
- hosts.org_dir: NIS+ servers unreachable 51
- le0: No carrier - cable disconnected or hub link test disabled? 51
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- I can't read your attachments. What mailer are you using? 52
-
number BAD I=number 19 number DUP I=number 39
- PARTIALLY ALLOCATED INODE I=number . CLEAR? 95
- EXCESSIVE BAD BLKS I=number . CONTINUE? 42 EXCESSIVE DUP BLKS I=number . CONTINUE? 42
- INCORRECT BLOCK COUNT I=number (should be number) . CORRECT? 55
- ie0: Ethernet jammed 52 ie0: no carrier 53
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t
- COUNT... . ADJUST? 66
- BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 18 UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119 DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f .
- REMOVE? 39
- Illegal Instruction 53 Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- Illegal seek 54 Image Tool: Unable to open XIL Library. 55
- The system will be shut down in number minutes 115
- umount: warning: /variable not in mnttab 117
- SCSI bus DATA IN phase parity error 103
- no such map in server's domain 87
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46
- fd0: unformatted diskette or no diskette in the drive 44
- No directory! Logging in with home=/ 82
- Inappropriate ioctl for device 55
- THE FOLLOWING FILE SYSTEM(S) HAD AN
- UNEXPECTED INCONSISTENCY: 113
- /dev/rdsk/variable: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. 37
- Login incorrect 67
- INCORRECT BLOCK COUNT I=number (should be number) . CORRECT? 55
- lockd[number]: create_client: no name for inet address 0xnumber 67
- inetd: Too many open files 57 inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- inetd[number]: variable/tcp: unknown service 56 inetd[number]: variable/udp: unknown service 57 INIT: Cannot create /var/adm/utmp or /var/adm/utmpx 57
- mailtool: Could not initialize the Classing Engine 69
- Could not initialize tooltalk (tt_open): TT_ERR_NOMP 33
- WARNING: TOD clock not initialized - CHECK AND RESET THE DATE! 123
- error: DPS has not initialized or server connection failed 40
- InitOutput: Error loading module for /dev/fb 58
- PARTIALLY ALLOCATED INODE I=number . CLEAR? 95 NOTICE: /variable: out of inodes 90
- 451 timeout waiting for input during variable 11
- automountd[number]: No network locking
- on variable: contact admin to install server change 16
- WARNING: No network locking on variable:
- contact admin to install server change 121
- Unable to install/attach driver 'variable' 118 Illegal Instruction 53
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- WARNING: processor level 4 interrupt not serviced 122
- Interrupted system call 59 Invalid argument 59
- chmod: ERROR: invalid mode 28
- Invalid null command 60
- Can't invoke /etc/init, error number 26
- I/O error 60
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server
- "variable:0.0" 128
- Inappropriate ioctl for device 55 Boot device: /iommu/sbus/variable/variable/sd@3,0 23
- Is a directory 61
- mount: /dev/dsk/variable is already mounted, /variable is busy, or... 72
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114
- nfs umount: variable: is busy 78
- mount: /dev/dsk/variable is already mounted, /variable is busy, or... 72
- Mail Tool is confused about the state of your Mail File. 70 Host is down 50
- Network is down 74
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- Text is lost because the maximum edit log size has
- been exceeded. 113
- Xlib: Client is not authorized to connect to Server 127
- mount: the state of /dev/dsk/variable is not okay 73
- Graphics Adapter device /dev/fb is of unknown type 49
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- Network is unreachable 74
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46 A command window has exited because its child exited. 13
- ie0: Ethernet jammed 52
- console login: ^J^M^Q^K^K^P 31
- kernel read error 61
- Password does not decrypt secret key for unix.uid@variable 96
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126 xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- Killed 61 kmem_free block already free 62
- File too large 47
- Result too large 101 Value too large for defined data type 120
- last message repeated number times 63 ld.so.1: variable: fatal: relocation error: symbol not found: variable 63
- ld.so.1: variable: fatal: variable: can't open file: errno=2 64 le0: Memory error! 64
- le0: No carrier - cable disconnected or hub link test disabled? 65
- le0: No carrier - transceiver cable problem? 65
- memory leaks 71
- NFS write error on host variable: No space left on device. 79
- No space left on device 85
- mailtool: Can't create dead letter: Permission denied 69 WARNING: processor level 4 interrupt not serviced 122
- Image Tool: Unable to open XIL Library. 55
- WARNING: /tmp: File system full, swap space limit exceeded 122
- assertion failed: variable, file variable, line number 16
- Cross-device link 34
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t COUNT... . 66
- le0: No carrier - cable disconnected or hub link test disabled? 65
- Too many links 116
- Arg list too long 14
- LL105W: Protocol error detected. 66 ln: cannot create /dev/fb: Read-only file system 67
- XView warning: Cannot load font set 'variable' (Font Package) 129
- InitOutput: Error loading module for /dev/fb 58 554 variable... Local configuration error 12
- lockd[number]: create_client: no name for inet address 0xnumber 67
- File locking deadlock 45
- automountd[number]: No network locking on variable: contact admin to install server change 16
- WARNING: No network locking on variable: contact admin to install server change 121
- No record locks available 83
- Text is lost because the maximum edit log size has been exceeded. 113
- No directory! Logging in with home=/ 82
- ROOT LOGIN /dev/console 102 ROOT LOGIN /dev/pts/number FROM variable 102
- Login incorrect 67
- console login: ^J^M^Q^K^K^P 31 Not login shell 90
- Use "logout" to logout. 119
- Use "logout" to logout. 119
- Arg list too long 14
- Arguments too long 16 File name too long 45
- /usr/openwin/bin/xinit: connection to X server lost 120
- Text is lost because the maximum edit log size has been exceeded. 113
- lp hang 68
- cpio: Bad magic number/header. 34
- Mail Tool is confused about the state of your Mail File. 70
- This mail file has been changed by another mail reader. 115
- This mail file has been changed by another mail reader. 115
- Mail Tool is confused about the state of your Mail File. 70 mail: Your mailfile was found to be corrupted (Content-length mismatch). 70
- I can't read your attachments. What mailer are you using? 52
- mail: Your mailfile was found to be corrupted
- (Content-length mismatch). 70
- mailtool: Can't create dead letter: Permission denied 69 mailtool: Could not initialize the Classing Engine 69
- /dev/rdsk/variable: UNEXPECTED
- INCONSISTENCY; RUN fsck MANUALLY. 37
- cd: Too many arguments 27
- Too many links 116
- inetd: Too many open files 57
- Too many open files 117
- no such map in server's domain 87
- Text is lost because the maximum edit log size has been exceeded. 113
- No default media available 81
- out of memory 93
- Memory address alignment 71
- le0: Memory error! 64
- memory leaks 71
- Can't create public message device (Device busy) 25
- Broadcast Message from root (pts/number) on server [date] 23 No message of desired type 83
- last message repeated number times 63
- The system will be shut down in number minutes 115
- mail: Your mailfile was found to be corrupted
- (Content-length mismatch). 70
- ERROR: missing file arg (cm3) 40 filemgr: mknod: Permission denied 45
- umount: warning: /variable not in mnttab 117
- chmod: ERROR: invalid mode 28
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t COUNT... . ADJUST? 66 BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 18
- UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119 DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f . REMOVE? 39 ***** FILE SYSTEM WAS MODIFIED ***** 7
- InitOutput: Error loading module for /dev/fb 58
- bad module/chip at: variable 20
- ** Phase 1b - Rescan For More DUPS 20
- nfs mount: Couldn't bind to reserved port 75 mount: /dev/dsk/variable is already mounted,
- /variable is busy, or... 72
- mount: giving up on: /variable 72
- nfs mount: mount: variable: Device busy 76 mount: mount-point /variable does not exist. 73
- nfs mount: mount: variable: Device busy 76 NFS mount: /variable mounted OK 76
- mount: the state of /dev/dsk/variable is not okay 73
- NFS mount: /variable mounted OK 76
- mount: /dev/dsk/variable is already mounted, /variable is busy, or... 72
- mount: mount-point /variable does not exist. 73
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t COUNT... . ADJUST? 66 BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 18
- UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119 DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f . REMOVE? 39
- Recipient names must be specified 99
- host name configuration error 51
- lockd[number]: create_client: no name for inet address 0xnumber 67
- File name too long 45
- Recipient names must be specified 99
- sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- /net/variable: No such file or directory 73
- Read error from network: Connection reset by peer 98
- Network is down 74 Network is unreachable 74
- automountd[number]: No network locking on variable: contact admin
- to install server change 16
- WARNING: No network locking on variable: contact admin
- to install server change 121
- Could not start new viewer 33
- Stale NFS file handle 107
- NFS getattr failed for server variable: RPC: Timed out 75 nfs mount: Couldn't bind to reserved port 75 nfs mount: mount: variable: Device busy 76 NFS mount: /variable mounted OK 76
- NFS read failed for server variable 76 NFS server variable not responding still trying 77 NFS server variable ok 78
- nfs umount: variable: is busy 78 NFS write error on host variable: No space left on device. 79 NFS write failed for server variable: RPC: Timed out 79 nfs_server: bad getargs for number/number 77 NIS+ authentication failure 80
- ypbind[number]: NIS server for domain "variable" OK 129 ypbind[number]: NIS server not responding for domain "variable"; still trying 130 group.org_dir: NIS+ servers unreachable 49
- hosts.org_dir: NIS+ servers unreachable 51
- passwd.org_dir: NIS+ servers unreachable 95
- No buffer space available 80
- ie0: no carrier 53 le0: No carrier - cable disconnected or hub link test disabled? 65 le0: No carrier - transceiver cable problem? 65
- No child processes 81 No default media available 81 No directory! Logging in with home=/ 82
- fd0: unformatted diskette or no diskette in the drive 44
- No message of desired type 83
- lockd[number]: create_client: no name for inet address 0xnumber 67 automountd[number]: No network locking on variable: contact admin
- to install server 16change 16
- WARNING: No network locking on variable: contact admin
- to install server 121change 121
- No recipients specified 83 No record locks available 83 No route to host 84
- su: No shell 109
- No shell . Connection closed 84 No space left on device 85
- NFS write error on host variable: No space left on device. 79
- No such device 85 No such device or address 86 No such file or directory 86
- /home/variable: No such file or directory 50
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- /net/variable: No such file or directory 73
- tar: /dev/rmt/0: No such file or directory 111
- no such map in server's domain 87 No such process 87
- No such user as variable - cron entries not created 88
- ERROR [SCCS/s.variable]: 'SCCS/p.variable' nonexistent (ut4) 41
- sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- Not a directory 88
- automount[number]: variable: Not a directory 17
- Operation not applicable 93
- share_nfs: /home: Operation not applicable 106
- Xlib: Client is not authorized to connect to Server 127
- No such user as variable - cron entries not created 127
- Password does not decrypt secret key for unix.uid@variable 96 Directory not empty 38
- rmdir: variable: Directory not empty 101
- Not enough space 88
- mount: mount-point /variable does not exist. 73
- not found 89
- Command not found 28
- Event not found 42 xinit: not found 127
- ld.so.1: variable: fatal: relocation error: symbol not found: variable 63
- umount: warning: /variable not in mnttab 117
- mailtool: Could not initialize the Classing Engine 69
- Could not initialize tooltalk (tt_open): TT_ERR_NOMP 33
- WARNING: TOD clock not initialized - CHECK AND RESET THE DATE! 123
- error: DPS has not initialized or server connection failed 40
- Not login shell 90
- mount: the state of /dev/dsk/variable is not okay 73
- Not on system console 91 Not owner 91
- automountd[number]: server variable not responding 17
- ypbind[number]: NIS server not responding for domain "variable"; still trying 130
- NFS server variable not responding still trying 77
- WARNING: processor level 4 interrupt not serviced 122
- Could not start new viewer 33
- Not supported 91
- Protocol not supported 97
- stty: TCGETS: Operation not supported on socket 108
- NOTICE: /variable: out of inodes 90
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114
- Invalid null command 60
- answerbook: XView error: NULL pointer passed to xv_set 14
- Bad file number 19 Channel number out of range 27
- cpio: Bad magic number/header. 34
- No message of desired type 83
- mount: the state of /dev/dsk/variable is not okay 73 Argument out of domain 15
- NOTICE: /variable: out of inodes 90
- out of memory 93
- Channel number out of range 27
- Graphics Adapter device /dev/fb is of unknown type 49 Mail Tool is confused about the state of your Mail File. 70
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- ok 92
- NFS mount: /variable mounted OK 76
- NFS server variable ok 78
- ypbind[number]: NIS server for domain "variable" OK 129
- mount: the state of /dev/dsk/variable is not okay 73
- NFS write error on host variable: No space left on device. 79
- No space left on device 85
- su: 'su root' failed for variable on /dev/pts/number 109
- su: 'su root' succeeded for variable on /dev/pts/number 110
- NFS write error on host variable: No space left on device. 79
- mount: giving up on: /variable 72
- automountd[number]: No network locking on variable: contact admin to install server change 16
- WARNING: No network locking on variable: contact admin to install server change 121
- Broadcast Message from root (pts/number) on server [date] 23
- stty: TCGETS: Operation not supported on socket 108
- Not on system console 91
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- fsck: Can't open /dev/dsk/variable 48
- dumptm: Cannot open '/dev/rmt/variable': Device busy 39 setmnt: Cannot open /etc/mnttab for writing 106
- ld.so.1: variable: fatal: variable: can't open file: errno=2 64
- inetd: Too many open files 57
- Too many open files 117
- Image Tool: Unable to open XIL Library. 55
- operation failed [error 185], unknown group error 0, variable 92
- Operation not applicable 93
- share_nfs: /home: Operation not applicable 106 stty: TCGETS: Operation not supported on socket 108
- mount: /dev/dsk/variable is already mounted,
- /variable is busy, or... 72 No such device or address 86
- /home/variable: No such file or directory 50
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- /net/variable: No such file or directory 73
- No such file or directory 86
- tar: /dev/rmt/0: No such file or directory 111
- le0: No carrier - cable disconnected or hub link test disabled? 111
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- fd0: unformatted diskette or no diskette in the drive 44
- error: DPS has not initialized or server connection failed 40
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126
- INIT: Cannot create /var/adm/utmp or /var/adm/utmpx 57
- Connection timed out 30
- NFS getattr failed for server variable: RPC: Timed out 75 NFS write failed for server variable: RPC: Timed out 79
- Argument out of domain 15
- NOTICE: /variable: out of inodes 90
- out of memory 93
- Channel number out of range 27
- File table overflow 47
- zsnumber: silo overflow 131
- esp0: data transfer overrun 41
- Not owner 91
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t
- COUNT... . ADJUST? 66
- BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 18 UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119 DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f .
- REMOVE? 39
- XView warning: Cannot load font set 'variable' (Font Package) 129
- Timeout waiting for ARP/RARP packet 116
- Panic 94
- SCSI bus DATA IN phase parity error 103
- PARTIALLY ALLOCATED INODE I=number . CLEAR? 95
- answerbook: XView error: NULL pointer passed to xv_set 14
- passwd.org_dir: NIS+ servers unreachable 95 Password does not decrypt secret key for unix.uid@variable 96
- ** Phase 2 - Check Pathnames 96
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- Read error from network: Connection reset by peer 98
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- Permission denied 96
- filemgr: mknod: Permission denied 45
- mailtool: Can't create dead letter: Permission denied 69
- Reset tty pgrp from number to number 100
- ** Phase 1 - Check Blocks and Sizes 8 ** Phase 1b - Rescan For More DUPS 8 ** Phase 2 - Check Pathnames 9 ** Phase 3 - Check Connectivity 9 ** Phase 4 - Check Reference Counts 10 ** Phase 5 - Check Cyl groups 10
- SCSI bus DATA IN phase parity error 103
- Broken pipe 24
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- Please specify a recipient. 97
- answerbook: XView error: NULL pointer passed to xv_set 14
- nfs mount: Couldn't bind to reserved port 75
- le0: No carrier - transceiver cable problem? 75
- No such process 87 No child processes 81
- WARNING: processor level 4 interrupt not serviced 122 LL105W: Protocol error detected. 66
- Protocol not supported 97 Protocol wrong type for socket 97
- Broadcast Message from root (pts/number) on server [date] 23
- Can't create public message device (Device busy) 25
- Disc quota exceeded 38
- Channel number out of range 27
- Soft error rate (number%) during writing was too high 106 Soft error rate (retries = number) during writing was too high 107 kernel read error 61
- Read error from network: Connection reset by peer 98
- NFS read failed for server variable 76
- I can't read your attachments. What mailer are you using? 52
- This mail file has been changed by another mail reader. 115
- sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- Read-only file system 98
- ln: cannot create /dev/fb: Read-only file system 67
- SCSI transport failed: reason 'reset' 103
- rebooting... 99
- Watchdog Reset, Rebooting. 124
- admintool: Received communication service error 4 13
- Please specify a recipient. 97
- Recipient names must be specified 99
- No recipients specified 83 No record locks available 83
- ** Phase 4 - Check Reference Counts 83
- Connection refused 30
- Xlib: connection to "variable:0.0" refused by server 128
- ld.so.1: variable: fatal: relocation error: symbol not found: variable 63
- DUP/BAD I=i OWNER=o MODE=m SIZE=s
- MTIME=t FILE=f . REMOVE? 39
- WARNING: Unable to repair the / filesystem. Run fsck 123
- last message repeated number times 63 Block device required 22
- ** Phase 1b - Rescan For More DUPS 22
- nfs mount: Couldn't bind to reserved port 75 SCSI transport failed: reason 'reset' 103
- Watchdog Reset 124
- Read error from network: Connection reset by peer 98
- Watchdog Reset, Rebooting. 124
- WARNING: Clock gained number days - CHECK AND RESET THE DATE! 124 WARNING: TOD clock not initialized - CHECK AND RESET THE DATE! 124
- Reset tty pgrp from number to number 100 Resource temporarily unavailable 100
- automountd[number]: server variable not responding 17
- ypbind[number]: NIS server not responding for domain "variable"; still trying 130
- NFS server variable not responding still trying 77
- Result too large 101
- Soft error rate (retries = number) during writing was too high 107
- rmdir: variable: Directory not empty 101
- su: 'su root' failed for variable on /dev/pts/number 109
- ROOT LOGIN /dev/console 102 ROOT LOGIN /dev/pts/number FROM variable 102
- Broadcast Message from root (pts/number) on server [date] 23
- su: 'su root' succeeded for variable on /dev/pts/number 110 No route to host 84
- NFS getattr failed for server variable: RPC: Timed out 75 NFS write failed for server variable: RPC: Timed out 79
- WARNING: Unable to repair the / filesystem. Run fsck 123
- /dev/rdsk/variable: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. 37
- rx framing error 102
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- ERROR [SCCS/s.variable]: 'SCCS/p.variable' nonexistent (ut4) 41
- ERROR [SCCS/s.variable]: 'SCCS/p.variable' nonexistent (ut4) 41 ERROR [SCCS/s.variable]: writable 'variable' exists (ge4) 41
- SCSI bus DATA IN phase parity error 103
- The SCSI bus is hung. Perhaps an external device is turned off. 114 SCSI transport failed: reason 'reset' 103
- Password does not decrypt secret key for unix.uid@variable 96
- Illegal seek 54
- Segmentation Fault 104 sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- Xlib: Client is not authorized to connect to Server 127 Xlib: connection to "variable:0.0" refused by server 128
- automountd[number]: No network locking on variable:
- contact admin to install server change 16
- WARNING: No network locking on variable: contact
- admin to install server change 121
- error: DPS has not initialized or server connection failed 40
- Broadcast Message from root (pts/number) on server [date] 23
- ypbind[number]: NIS server for domain "variable" OK 129
- /usr/openwin/bin/xinit: connection to X server lost 120
- ypbind[number]: NIS server not responding for domain "variable"; still trying 130 NFS read failed for server variable 76
- automountd[number]: server variable not responding 17
- NFS server variable not responding still trying 77 NFS server variable ok 78
- NFS getattr failed for server variable: RPC: Timed out 75 NFS write failed for server variable: RPC: Timed out 79
- XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126
- no such map in server's domain 87
- group.org_dir: NIS+ servers unreachable 49 hosts.org_dir: NIS+ servers unreachable 51
- passwd.org_dir: NIS+ servers unreachable 95
- inetd[number]: variable/tcp: unknown service 56 inetd[number]: variable/udp: unknown service 57 admintool: Received communication service error 4 13
- syslog service starting. 111
- WARNING: processor level 4 interrupt not serviced 122
- XView warning: Cannot load font set 'variable' (Font Package) 129
- setmnt: Cannot open /etc/mnttab for writing 106 share_nfs: /home: Operation not applicable 106
- Not login shell 90
- su: No shell 109
- No shell . Connection closed 84
- INCORRECT BLOCK COUNT I=number (should be number) . CORRECT? 55
- The system will be shut down in number minutes 115
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126
- zsnumber: silo overflow 131 Deadlock situation detected/avoided 36
- Text is lost because the maximum edit log size has been exceeded. 113
- ** Phase 1 - Check Blocks and Sizes 113
- LINK COUNT FILE I=i OWNER=o MODE=m SIZE=s MTIME=t COUNT... . ADJUST? 66 BAD/DUP FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 18
- UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119 DUP/BAD I=i OWNER=o MODE=m SIZE=s MTIME=t FILE=f . REMOVE? 39
- Protocol wrong type for socket 97
- stty: TCGETS: Operation not supported on socket 108
- Soft error rate (number%) during writing was too high 106 Soft error rate (retries = number) during writing was too high 107
- Not enough space 88 No buffer space available 80
- NFS write error on host variable: No space left on device. 79
- No space left on device 85
- WARNING: /tmp: File system full, swap space limit exceeded 122
- No recipients specified 83
- Recipient names must be specified 99
- Please specify a recipient. 97
- Stale NFS file handle 107
- Could not start new viewer 33
- syslog service starting. 111
- fsck: Can't stat /dev/dsk/variable 48
- statd: cannot talk to statd at variable 108
- statd: cannot talk to statd at variable 108
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46 mount: the state of /dev/dsk/variable is not okay 73
- Mail Tool is confused about the state of your Mail File. 70
- NFS server variable not responding still trying 77
- ypbind[number]: NIS server not responding for
- domain "variable"; still trying 130
- stty: TCGETS: Operation not supported on socket 108 su: No shell 109
- su: 'su root' failed for variable on /dev/pts/number 109 su: 'su root' succeeded for variable on /dev/pts/number 110 su: 'su root' failed for variable on /dev/pts/number 109 su: 'su root' succeeded for variable on /dev/pts/number 110
- su: 'su root' succeeded for variable on /dev/pts/number 110
- No such device 85 No such device or address 86
- /home/variable: No such file or directory 50
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- /net/variable: No such file or directory 73
- No such file or directory 86
- tar: /dev/rmt/0: No such file or directory 111
- no such map in server's domain 87
- No such process 87 No such user as variable - cron entries not created 88
- BAD SUPER BLOCK: variable 20
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46
- Not supported 91
- Protocol not supported 97
- stty: TCGETS: Operation not supported on socket 108
- WARNING: /tmp: File system full, swap space limit exceeded 122
- ld.so.1: variable: fatal: relocation error: symbol not found: variable 63
- can't synchronize with hayes 27 syncing file systems... 110
- sendmail[number]: NOQUEUE: SYSERR: net hang reading from variable 105
- syslog service starting. 111
- /dev/rdsk/variable: CAN'T CHECK FILE SYSTEM. 37 ln: cannot create /dev/fb: Read-only file system 67
- Read-only file system 98 Interrupted system call 59
- Not on system console 91
- WARNING: /tmp: File system full, swap space limit exceeded 122
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114 FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46
- ***** FILE SYSTEM WAS MODIFIED ***** 7 The system will be shut down in number minutes 115
- syncing file systems... 110
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED INCONSISTENCY: 113
- File table overflow 47
- statd: cannot talk to statd at variable 108
- tar: tape write error 112
- tar: /dev/rmt/0: No such file or directory 111 tar: directory checksum error 112
- tar: tape write error 112
- stty: TCGETS: Operation not supported on socket 108
- Resource temporarily unavailable 100
- le0: No carrier - cable disconnected or hub link test disabled? 100
- Text is lost because the maximum edit log size has been exceeded. 113
- WARNING: Unable to repair the / filesystem. Run fsck 123 mailtool: Could not initialize the Classing Engine 69
- WARNING: Clock gained number days -
- CHECK AND RESET THE DATE! 69
- WARNING: TOD clock not initialized -
- CHECK AND RESET THE DATE! 69
- fd0: unformatted diskette or no diskette in the drive 44
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED INCONSISTENCY: 113
- Text is lost because the maximum edit log size has been exceeded. 113
- The SCSI bus is hung. Perhaps an external device is turned off. 114
- mount: the state of /dev/dsk/variable is not okay 73
- Mail Tool is confused about the state of your Mail File. 70
- THE SYSTEM IS BEING SHUT DOWN NOW !!! 114 The system will be shut down in number minutes 115 This mail file has been changed by another mail reader. 115
- Connection timed out 30
- NFS getattr failed for server variable: RPC: Timed out 75 NFS write failed for server variable: RPC: Timed out 79
- Timeout waiting for ARP/RARP packet 116
- 451 timeout waiting for input during variable 11
- last message repeated number times 63
- WARNING: /tmp: File system full, swap space limit exceeded 122
- mail: Your mailfile was found to be corrupted (Content-length mismatch). 70 Xlib: Client is not authorized to connect to Server 127
- Reset tty pgrp from number to number 100
- No route to host 84
- automountd[number]: No network locking
- on variable: contact admin to install server change 16
- WARNING: No network locking on variable: contact admin to install server change 121
- Unable to install/attach driver 'variable' 118
- Use "logout" to logout. 119
- Image Tool: Unable to open XIL Library. 55 WARNING: Unable to repair the / filesystem. Run fsck 123
- nfs mount: Couldn't bind to reserved port 75
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126
- Xlib: connection to "variable:0.0" refused by server 128
- Xlib: Client is not authorized to connect to Server 127
- statd: cannot talk to statd at variable 108
- /usr/openwin/bin/xinit: connection to X server lost 120
- answerbook: XView error: NULL pointer passed to xv_set 14
- WARNING: TOD clock not initialized - CHECK AND RESET
- THE DATE! 123
- /bin/sh: variable: too big 22
- Soft error rate (number%) during writing was too high 106
- Soft error rate (retries = number) during writing was too high 107
- File too large 47
- Result too large 101 Value too large for defined data type 120
- Arg list too long 14
- Arguments too long 16 File name too long 45
- cd: Too many arguments 27
- Too many links 116
- Too many open files 117
- inetd: Too many open files 57 Mail Tool is confused about the state of your Mail File. 70 Image Tool: Unable to open XIL Library. 55
- Could not initialize tooltalk (tt_open): TT_ERR_NOMP 33 le0: No carrier - transceiver cable problem? 33
- esp0: data transfer overrun 41
- SCSI transport failed: reason 'reset' 103 BAD TRAP 21
- bad trap = number 22
- NFS server variable not responding still trying 77
- ypbind[number]: NIS server not responding for
- domain "variable"; still trying 130
- Could not initialize tooltalk (tt_open): TT_ERR_NOMP 33
- Could not initialize tooltalk (tt_open): TT_ERR_NOMP 33
- Reset tty pgrp from number to number 100
- The SCSI bus is hung. Perhaps an external device is turned off. 114 Graphics Adapter device /dev/fb is of unknown type 49
- No message of desired type 83
- Value too large for defined data type 120
- Protocol wrong type for socket 97
- nfs umount: variable: is busy 78 umount: warning: /variable not in mnttab 117 Unable to install/attach driver 'variable' 118
- Image Tool: Unable to open XIL Library. 55 WARNING: Unable to repair the / filesystem. Run fsck 123
- Resource temporarily unavailable 100
- undefined control 118
- Window Underflow 125
- THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED INCONSISTENCY: 113
- /dev/rdsk/variable: UNEXPECTED INCONSISTENCY;
- RUN fsck MANUALLY. 37
- fd0: unformatted diskette or no diskette in the drive 44
- Password does not decrypt secret key for unix.uid@variable 96
- 550 variable... Host unknown 11 550 variable... User unknown 12
- operation failed [error 185], unknown group error 0, variable 92 inetd[number]: variable/tcp: unknown service 56 inetd[number]: variable/udp: unknown service 57
- Graphics Adapter device /dev/fb is of unknown type 49
- Unmatched ' 118
- group.org_dir: NIS+ servers unreachable 49 hosts.org_dir: NIS+ servers unreachable 51
- Network is unreachable 74
- passwd.org_dir: NIS+ servers unreachable 95
- UNREF FILE I=i OWNER=o MODE=m SIZE=s MTIME=t . CLEAR? 119
- giving up 49
- mount: giving up on: /variable 72
- Use "logout" to logout. 119
- No such user as variable - cron entries not created 88
- 550 variable... User unknown 12
- I can't read your attachments. What mailer are you using? 52
- /usr/openwin/bin/xinit: connection to X server lost 120
- inetd[number]: execv /usr/sbin/in.uucpd: No such file or directory 56
- ERROR [SCCS/s.variable]: 'SCCS/p.variable' nonexistent (ut4) 41
- Value too large for defined data type 120
- INIT: Cannot create /var/adm/utmp or /var/adm/utmpx 57
- INIT: Cannot create /var/adm/utmp or /var/adm/utmpx 57
- Could not start new viewer 33
- Timeout waiting for ARP/RARP packet 116
- 451 timeout waiting for input during variable 11 XView warning: Cannot load font set 'variable' (Font Package) 129
- WARNING: Clock gained number days - CHECK AND RESET 121THE DATE! 121 WARNING: No network locking on variable: contact admin to install server 121
- WARNING: processor level 4 interrupt not serviced 122
- umount: warning: /variable not in mnttab 117
- WARNING: /tmp: File system full, swap space limit exceeded 122
- WARNING: TOD clock not initialized - CHECK AND RESET 123THE DATE! 123
- WARNING: Unable to repair the / filesystem. Run fsck 123
- Illegal instruction "0xnumber" was encountered at PC 0xnumber 54
- mail: Your mailfile was found to be corrupted (Content-length mismatch). 70 ***** FILE SYSTEM WAS MODIFIED ***** 7
- Soft error rate (number%) during writing was too high 106
- Soft error rate (retries = number) during writing was too high 107
- Watchdog Reset 124 Watchdog Reset, Rebooting. 124
- I can't read your attachments. What mailer are you using? 52
- Who are you? 125
- The system will be shut down in number minutes 115 A command window has exited because its child exited. 13
- Window Underflow 125
- can't synchronize with hayes 27
- No directory! Logging in with home=/ 82
- ypwhich: can't communicate with ypbind 130 ERROR [SCCS/s.variable]: writable 'variable' exists (ge4) 41
- tar: tape write error 112
- NFS write error on host variable: No space left on device. 79 NFS write failed for server variable: RPC: Timed out 79
- setmnt: Cannot open /etc/mnttab for writing 106
- Soft error rate (number%) during writing was too high 106
- Soft error rate (retries = number) during writing was too high 107
- FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? 46
- FREE BLK COUNT(S) WRONG IN SUPERBLK . SALVAGE? 48
- Protocol wrong type for socket 97
- X connection to variable:0.0 broken (explicit kill or server shutdown). 126
- /usr/openwin/bin/xinit: connection to X server lost 120 XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server "variable:0.0" 128
- Image Tool: Unable to open XIL Library. 55
- xinit: not found 127 XIO: fatal IO error 32 (Broken pipe) on X server "variable:0.0" 127
- Xlib: Client is not authorized to connect to Server 127 Xlib: connection to "variable:0.0" refused by server 128 xterm: fatal IO error 32 (Broken Pipe) or KillClient on X server 128
- answerbook: XView error: NULL pointer passed to xv_set 14
- XView warning: Cannot load font set 'variable' (Font Package) 129
- answerbook: XView error: NULL pointer passed to xv_set 14
- Who are you? 125
- I can't read your attachments. What mailer are you using? 52
- I can't read your attachments. What mailer are you using? 52
- Mail Tool is confused about the state of your Mail File. 70
- mail: Your mailfile was found to be corrupted
- (Content-length mismatch). 70
- ypwhich: can't communicate with ypbind 130
- ypbind[number]: NIS server for domain "variable" OK 129 ypbind[number]: NIS server not responding for domain "variable"; still trying 130
- ypwhich: can't communicate with ypbind 130 zsnumber: silo overflow 131
|
|