Contained Within
Find More Documentation
Featured Support Resources
|  PDF로 이 문서 다운로드
NAME
- Intro, intro - introduction to maintenance commands and application programs
AVAILABILITY
- This section indicates which package contains the commands being described on this page. To be able to use the command, the indicated package must have been installed with the operating system. For information on how to add a package see pkgadd (1).
DESCRIPTION
- This section describes, in alphabetical order, commands that are used chiefly for system maintenance and administration purposes.
- Because of command restructuring for the Virtual File System architecture, there are several instances of multiple manual pages that begin with the same name. For example, the mount ,pages - mount (1M),mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), and mount_ufs(1M). In each such case the first of the multiple pages describes the syntax and options of the generic command, that is, those options applicable to all FSTypes (file system types). The succeeding pages describe the functionality of the FSType-specific modules of the command. These pages list the command followed by an underscore ( _ ) and the FSType to which they pertain. Note that the administrator should not attempt to call these modules directly. The generic command provides a common interface to all of them. Thus the FSType-specific manual pages should not be viewed as describing distinct commands, but rather as detailing those aspects of a command that are specific to a particular FSType.
COMMAND SYNTAX
- Unless otherwise noted, commands described in this section accept options and other arguments according to the following syntax:
-
name [option(s)] [cmdarg(s)]
- where:
-
-
name
- The name of an executable file
-
-
option
- - noargletter(s) or,
- - argletter< >optarg
- where < > is optional white space
-
-
noargletter
- A single letter representing an option without an argument
-
-
argletter
- A single letter representing an option requiring an argument
-
-
optarg
- Argument (character string) satisfying preceding argletter
-
-
cmdarg
- Pathname (or other command argument) not beginning with - or, - by itself indicating the standard input
SEE ALSO
-
getopt(1), pkgadd (1M),getopt(3C)
DIAGNOSTICS
- Upon termination, each command returns 0 for normal termination and non-zero to indicate troubles such as erroneous parameters, bad or inaccessible data, or other inability to cope with the task at hand. It is called variously ``exit code,'' ``exit status,'' or ``return code,'' and is described only where special conventions are involved.
NOTES
- Unfortunately, not all commands adhere to the standard syntax.
-
-
Name Appears on Page Description
-
-
accept
-
accept(1M)
- accept or reject print requests
-
-
acct
-
acct(1M)
- overview of accounting and
- miscellaneous accounting commands
-
-
acctcms
-
acctcms(1M)
- command summary from process
- accounting records
-
-
acctcon1 acctcon(1M) connect-time accounting
acctcon2 acctcon(1M) connect-time accounting
acctcon acctcon(1M) connect-time accounting
acctdisk acct(1M) overview of accounting and
- miscellaneous accounting commands
-
-
acctdusg
-
acct(1M)
- overview of accounting and
- miscellaneous accounting commands
-
-
acctmerg acctmerg(1M) merge or add total accounting files
accton acct(1M) overview of accounting and
- miscellaneous accounting commands
-
-
acctprc1 acctprc(1M) process accounting
acctprc2 acctprc(1M) process accounting
acctprc acctprc(1M) process accounting
acctsh acctsh(1M) shell procedures for accounting
acctwtmp acct(1M) overview of accounting and
- miscellaneous accounting commands
-
-
adbgen adbgen(1M) generate adb script
add_drv add_drv(1M) add a new device driver to the system
add_install_client install_scripts(1M) scripts used to install the Solaris
software
addbadsec addbadsec(1M) map out defective disk blocks
admind admind(1M) distributed system administration
daemon
admintool admintool(1M) system administration with a graphical
user interface
aliasadm aliasadm(1M) manipulate the NIS+ aliases map
allocate allocate(1M) device allocation
arp arp (1M) address resolution display and control
aset.restore aset.restore(1M) restores system files to their content
- before ASET is installed
-
-
aset
-
aset(1M)
- monitors or restricts accesses to
- system files and directories
-
-
aspppd aspppd(1M) Asynchronous PPP Link Manager
aspppls aspppd(1M) Asynchronous PPP Link Manager
-
-
audit
-
audit(1M)
- control the behavior of the audit
- daemon
-
-
audit_startup audit_startup(1M) audit subsystem initialization script
audit_warn audit_warn(1M) audit daemon warning script
auditconfig auditconfig(1M) configure auditing
auditd auditd(1M) audit daemon
auditreduce auditreduce(1M) merge and select audit records from
audit trail files
auditstat auditstat(1M) display kernel audit statistics
automount automount (1M) install automatic mount points
automountd automountd(1M) autofs mount/unmount daemon
autopush autopush(1M) configures lists of automatically
- pushed STREAMS modules
-
-
bdconfig
-
bdconfig (1M)
- configures the bd (buttons and dials)
- stream
-
-
boot
-
boot(1M)
- start the system kernel or a
- standalone program
-
-
bootparamd rpc.bootparamd (1M) boot parameter server
bsmconv bsmconv(1M) enable/disable the Basic Security
- Module (BSM) on Solaris
-
-
bsmunconv
-
bsmconv(1M)
- enable/disable the Basic Security
- Module (BSM) on Solaris
-
-
captoinfo
-
captoinfo(1M)
- convert a termcap description into a
- terminfo description
-
-
catman catman(1M) create the cat files for the manual
cfsadmin cfsadmin(1M) administer disk space used for caching
- file systems with the Cache
- File-System (CacheFS)
-
-
cg14config cg14config(1M) configure the cgfourteen device
chargefee acctsh(1M) shell procedures for accounting
check install_scripts(1M) scripts used to install the Solaris
software
chown chown(1M) change owner
chroot chroot(1M) change root directory for a command
chrtbl chrtbl(1M) generate character classification and
conversion tables
ckpacct acctsh(1M) shell procedures for accounting
closewtmp acct(1M) overview of accounting and
- miscellaneous accounting commands
-
-
clri clri(1M) clear inode
colltbl colltbl(1M) create string collation routines
comsat in.comsat(1M) biff server
convert4x convert4x(1M) converts SunOS 4.x clients to work
- from Solaris 2.x servers
-
-
crash
-
crash(1M)
- examine system images
-
-
cron cron (1M) clock daemon
dd dd(1M) convert and copy a file
deallocate deallocate(1M) device deallocation
devattr devattr(1M) lists device attributes
devconfig devconfig(1M) configure device attributes
devfree devfree(1M) release devices from exclusive use
devinfo devinfo(1M) print device specific information
devlinks devlinks(1M) adds /dev entries for miscellaneous
- devices and pseudo-devices
-
-
devnm devnm(1M) device name
devreserv devreserv(1M) reserve devices for exclusive use
df df (1M) report number of free disk blocks and
files
df_ufs df_ufs(1M) report free disk space on ufs file
systems
dfmounts dfmounts(1M) display mounted resource information
dfmounts_nfs dfmounts_nfs(1M) display mounted NFS resource
information
dfshares dfshares(1M) list available resources from remote
or local systems
dfshares_nfs dfshares_nfs(1M) list available NFS resources from
remote systems
discover4x discover4x(1M) analyze the SunOS 4.1 client support
- after converting to Solaris 2.1
-
-
disks
-
disks(1M)
- adds /dev entries for hard disks
- attached to the system
-
-
diskscan diskscan(1M) perform surface analysis
dispadmin dispadmin(1M) process scheduler administration
dmesg dmesg (1M) collect system diagnostic messages to
form error log
dminfo dminfo(1M) report information about a device
- entry in a device maps file
-
-
dodisk acctsh(1M) shell procedures for accounting
domainname domainname (1M) set or display name of the current
domain
drvconfig drvconfig(1M) configure the /devices directory
du du(1M) summarize disk usage
edquota edquota(1M) edit user quotas for ufs file system
eeprom eeprom(1M) EEPROM display and load utility
fdetach fdetach(1M) detach a name from a STREAMS-based
file descriptor
fdisk fdisk(1M) create or modify fixed disk partition
table
-
-
ff
-
ff(1M)
- list file names and statistics for a
- file system
-
-
ff_ufs
-
ff_ufs(1M)
- list file names and statistics for a
- ufs file system
-
-
fingerd in.fingerd(1M) remote user information server
firmware firmware(1M) bootable firmware programs and
firmware commands
fmthard fmthard(1M) populate VTOC on hard disks
format format(1M) disk partitioning and maintenance
utility
fsck fsck(1M) check and repair file systems
fsck_cachefs fsck_cachefs(1M) check integrity of data cached with
CacheFS
fsck_s5fs fsck_s5fs(1M) file system consistency check and
interactive repair
fsck_ufs fsck_ufs(1M) file system consistency check and
interactive repair
fsdb fsdb(1M) file system debugger
fsdb_ufs fsdb_ufs(1M) ufs file system debugger
fsirand fsirand(1M) install random inode generation
numbers
fstyp fstyp(1M) determine file system type
ftpd in.ftpd(1M) file transfer protocol server
fusage fusage (1M) disk access profiler
fuser fuser(1M) identify processes using a file or
file structure
fwtmp fwtmp(1M) manipulate connect accounting records
gencc gencc(1M) create a front-end to the cc command
getdev getdev(1M) lists devices based on criteria
getdgrp getdgrp(1M) lists device groups which contain
- devices that match criteria
-
-
getent
-
getent(1M)
- get entries from administrative
- database
-
-
gettable
-
gettable(1M)
- get DoD Internet format host table
- from a host
-
-
getty
-
getty(1M)
- set terminal type, modes, speed, and
- line discipline
-
-
getvol getvol(1M) verifies device accessibility
groupadd groupadd(1M) add (create) a new group definition on
the system
groupdel groupdel(1M) delete a group definition from the
system
groupmod groupmod(1M) modify a group definition on the
system
grpck pwck(1M) password/group file checkers
-
-
gsconfig
-
gsconfig(1M)
- initialize the SBus GS graphics
- accelerator
-
-
gtconfig
-
gtconfig(1M)
- initialize the GT Graphics Accelerator
- and download microcode
-
-
halt halt(1M) stop the processor
hostconfig hostconfig(1M) configure a system's host parameters
htable htable(1M) convert DoD Internet format host table
id id(1M) print the user name, user ID, group
name and group ID
ifconfig ifconfig (1M) configure network interface parameters
in.comsat in.comsat(1M) biff server
in.fingerd in.fingerd(1M) remote user information server
in.ftpd in.ftpd(1M) file transfer protocol server
in.named in.named(1M) Internet domain name server
in.rarpd in.rarpd(1M) DARPA Reverse Address Resolution
Protocol server
in.rdisc in.rdisc(1M) network router discovery daemon
in.rexecd in.rexecd(1M) remote execution server
in.rlogind in.rlogind(1M) remote login server
in.routed in.routed(1M) network routing daemon
in.rshd in.rshd(1M) remote shell server
in.rwhod in.rwhod(1M) system status server
in.talkd in.talkd(1M) server for talk program
in.telnetd in.telnetd(1M) DARPA TELNET protocol server
in.tftpd in.tftpd(1M) Internet Trivial File Transfer
Protocol server
in.tnamed in.tnamed(1M) DARPA trivial name server
in.uucpd in.uucpd(1M) UUCP server
inetd inetd(1M) Internet services daemon
infocmp infocmp(1M) compare or print out terminfo
descriptions
init init(1M) process control initialization
install4x install4x(1M) install SunOS 4.1 diskless/dataless
- client support on Solaris 2.1 servers
-
-
install install(1M) install commands
install_scripts install_scripts(1M) scripts used to install the Solaris
software
installboot installboot(1M) install bootblocks in a disk partition
installf installf(1M) add a file to the software
installation database
iostat iostat(1M) report I/O statistics
kadb kadb(1M) a kernel debugger
-
-
kdmconfig
-
kdmconfig(1M)
- configure or unconfigure keyboard,
- display, and mouse options for
- OpenWindows and internationalization
-
-
kerbd
-
kerbd(1M)
- generates and validates Kerberos
- tickets for kernel RPC
-
-
kernel
-
kernel(1M)
- UNIX system executable file containing
- basic operating system services
-
-
keyserv
-
keyserv(1M)
- server for storing private encryption
- keys
-
-
killall killall(1M) kill all active processes
labelit labelit(1M) list or provide labels for file
systems
labelit_hsfs labelit_hsfs(1M) provide and print labels for hsfs file
systems
labelit_ufs labelit_ufs(1M) provide and print labels for ufs file
systems
lastlogin acctsh(1M) shell procedures for accounting
leoconfig leoconfig(1M) initialize the Leo (ZX) Graphics
- Accelerator and download microcode
-
-
link link(1M) link and unlink files and directories
list_devices list_devices(1M) list allocatable devices
listdgrp listdgrp(1M) lists members of a device group
listen listen(1M) network listener daemon
lockd lockd(1M) network lock daemon
lockfs lockfs(1M) change or report file system locks
logins logins(1M) list user and system login information
lpadmin lpadmin(1M) configure the LP print service
lpfilter lpfilter(1M) administer filters used with the LP
print service
lpforms lpforms(1M) administer forms used with the LP
print service
lpmove lpsched(1M) start/stop the LP print service and
move requests
lpsched lpsched(1M) start/stop the LP print service and
move requests
lpshut lpsched(1M) start/stop the LP print service and
move requests
lpsystem lpsystem(1M) register remote systems with the print
service
lpusers lpusers(1M) set printing queue priorities
makedbm makedbm(1M) make a dbm file, or get a text file
from a dbm file
mk mk (1M) remake the binary system and commands
from source code
mkfifo mkfifo(1M) make FIFO special file
-
-
mkfile mkfile(1M) create a file
mkfs mkfs(1M) construct a file system
mkfs_ufs mkfs_ufs(1M) construct a ufs file system
mknod mknod(1M) make a special file
modinfo modinfo(1M) display information about loaded
kernel modules
modload modload(1M) load a kernel module
modunload modunload(1M) unload a module
monacct acctsh(1M) shell procedures for accounting
monitor monitor(1M) SPARC system PROM monitor
montbl montbl(1M) create monetary database
mount mount (1M) mount or unmount file systems and
remote resources
mount_cachefs mount_cachefs(1M) mount CacheFS file systems
mount_hsfs mount_hsfs(1M) mount hsfs file systems
mount_nfs mount_nfs(1M) mount remote NFS resources
mount_pcfs mount_pcfs(1M) mount pcfs file systems
mount_s5fs mount_s5fs(1M) mount s5 file systems
mount_tmpfs mount_tmpfs(1M) mount tmpfs file systems
mount_ufs mount_ufs(1M) mount ufs file systems
mountall mountall(1M) mount, unmount multiple file systems
mountd mountd(1M) NFS mount request server
mpstat mpstat(1M) report per-processor statistics
mvdir mvdir(1M) move a directory
named-xfer in.named(1M) Internet domain name server
named in.named(1M) Internet domain name server
ncheck ncheck(1M) generate a list of path names versus
i-numbers
ncheck_ufs ncheck_ufs(1M) generate pathnames versus i-numbers
for ufs file systems
ndd ndd(1M) get and set driver configuration
parameters
netstat netstat(1M) show network status
newfs newfs(1M) construct a new ufs file system
newgrp newgrp (1M) log in to a new group
newkey newkey(1M) create a new Diffie-Hellman key pair
- in the publickey database
-
-
nfsd nfsd(1M) NFS daemon
nfsstat nfsstat(1M) Network File System statistics
nis_cachemgr nis_cachemgr(1M) NIS+ utility to cache location
- information about NIS+ servers
-
-
nisaddcred nisaddcred(1M) create NIS+ credentials
nisaddent nisaddent(1M) create NIS+ tables from corresponding
- /etc files or NIS maps
-
-
nisclient
-
nisclient(1M)
- initialize NIS+ credentials for NIS+
- principals
-
-
nisd rpc.nisd(1M) NIS+ service daemon
nisd_resolv rpc.nisd(1M) NIS+ service daemon
nisinit nisinit(1M) NIS+ client and server initialization
utility
nislog nislog(1M) display the contents of the NIS+
transaction log
nisping nisping(1M) send ping to NIS+ servers
nispopulate nispopulate(1M) populate the NIS+ tables in a NIS+
domain.
nisserver nisserver(1M) set up NIS+ servers.
nissetup nissetup(1M) initialize a NIS+ domain
nisshowcache nisshowcache(1M) NIS+ utility to print out the contents
- of the shared cache file
-
-
nisstat nisstat(1M) report NIS+ server statistics
nisupdkeys nisupdkeys(1M) update the public keys in a NIS+
directory object
nlsadmin nlsadmin(1M) network listener service
administration
nslookup nslookup(1M) query name servers interactively
nstest nstest(1M) DNS test shell
nulladm acctsh(1M) shell procedures for accounting
passmgmt passmgmt(1M) password files management
pbind pbind(1M) control and query bindings of
- processes to processors
-
-
pfinstall pfinstall(1M) tests installation profiles
ping ping(1M) send ICMP ECHO_REQUEST packets to
network hosts
pkgadd pkgadd (1M) transfer software package to the
system
pkgask pkgask(1M) stores answers to a request script
pkgchk pkgchk(1M) check accuracy of installation
pkgrm pkgrm(1M) removes a package from the system
pmadm pmadm (1M) port monitor administration
ports ports(1M) create /dev entries and inittab
- entries for serial lines
-
-
poweroff halt(1M) stop the processor
praudit praudit(1M) print contents of an audit trail file
prctmp acctsh(1M) shell procedures for accounting
prdaily acctsh(1M) shell procedures for accounting
prtacct acctsh(1M) shell procedures for accounting
prtconf prtconf(1M) print system configuration
prtdiag prtdiag(1M) print system diagnostic information
prtvtoc prtvtoc(1M) print the VTOC of a block device
-
-
psradm psradm(1M) set processors online or offline
psrinfo psrinfo(1M) print processor information
putdev putdev(1M) edits device table
putdgrp putdgrp(1M) edits device group table
pwck pwck(1M) password/group file checkers
pwconv pwconv(1M) installs and updates /etc/shadow with
- information from /etc/passwd
-
-
quot quot(1M) summarize file system ownership
quota quota(1M) display a user's ufs file system disk
quota and usage
quotacheck quotacheck(1M) ufs file system quota consistency
checker
quotaoff quotaon(1M) turn ufs file system quotas on and off
quotaon quotaon(1M) turn ufs file system quotas on and off
rarpd in.rarpd(1M) DARPA Reverse Address Resolution
Protocol server
rdate rdate(1M) set system date from a remote host
rdisc in.rdisc(1M) network router discovery daemon
re-preinstall re-preinstall(1M) installs the JumpStart software on a
system
reboot reboot(1M) restart the operating system
reject accept(1M) accept or reject print requests
rem_drv rem_drv(1M) remove a device driver from the system
removef removef(1M) remove a file from software database
repquota repquota(1M) summarize quotas for a ufs file system
restricted_shell rsh(1M) restricted shell command interpreter
rexd rpc.rexd(1M) RPC-based remote execution server
rexecd in.rexecd(1M) remote execution server
rlogind in.rlogind(1M) remote login server
rm_install_client install_scripts(1M) scripts used to install the Solaris
software
rmmount rmmount(1M) removable media mounter that
- automatically mounts a file system on
- a CD-ROM and floppy.
-
-
rmt rmt(1M) remote magtape protocol module
route route(1M) manually manipulate the routing tables
routed in.routed(1M) network routing daemon
rpc.bootparamd rpc.bootparamd (1M) boot parameter server
rpc.nisd rpc.nisd(1M) NIS+ service daemon
rpc.nisd_resolv rpc.nisd(1M) NIS+ service daemon
rpc.rexd rpc.rexd(1M) RPC-based remote execution server
rpc.rstatd rpc.rstatd(1M) kernel statistics server
rpc.rusersd rpc.rusersd(1M) network username server
rpc.rwalld rpc.rwalld(1M) network rwall server
rpc.sprayd rpc.sprayd(1M) spray server
-
-
rpcbind
-
rpcbind(1M)
- universal addresses to RPC program
- number mapper
-
-
rpcinfo rpcinfo(1M) report RPC information
rpld rpld(1M) x86 Network Booting RPL (Remote
- Program Load) Server
-
-
rquotad rquotad(1M) remote quota server
rsh rsh(1M) restricted shell command interpreter
rshd in.rshd(1M) remote shell server
rstatd rpc.rstatd(1M) kernel statistics server
rtc rtc(1M) provide all real-time clock and
- GMT-lag management
-
-
runacct acctsh(1M) shell procedures for accounting
runacct runacct(1M) run daily accounting
rusersd rpc.rusersd(1M) network username server
rwall rwall(1M) write to all users over a network
rwalld rpc.rwalld(1M) network rwall server
rwhod in.rwhod(1M) system status server
sa1 sar(1M) system activity report package
sa2 sar(1M) system activity report package
sac sac(1M) service access controller
sacadm sacadm(1M) service access controller
administration
sadc sar(1M) system activity report package
sar sar(1M) system activity report package
savecore savecore(1M) save a core dump of the operating
system
sendmail sendmail(1M) send mail over the internet
setmnt setmnt(1M) establish mount table
setuname setuname(1M) changes machine information
setup_install_server install_scripts(1M) scripts used to install the Solaris
software
share share(1M) make local resource available for
- mounting by remote systems
-
-
share_nfs
-
share_nfs(1M)
- make local NFS filesystems available
- for mounting by remote systems
-
-
shareall shareall(1M) share, unshare multiple resources
showmount showmount(1M) show all remote mounts
showrev showrev(1M) show machine and software revision
information
shutacct acctsh(1M) shell procedures for accounting
shutdown shutdown(1M) shut down system, change system state
snoop snoop(1M) capture and inspect network packets
spray spray (1M) spray packets
sprayd rpc.sprayd(1M) spray server
startup acctsh(1M) shell procedures for accounting
-
-
statd statd(1M) network status monitor
strace strace(1M) print STREAMS trace messages
strclean strclean(1M) STREAMS error logger cleanup program
strerr strerr(1M) STREAMS error logger daemon
sttydefs sttydefs(1M) maintain line settings and hunt
- sequences for TTY ports
-
-
su su(1M) become super-user or another user
sulogin sulogin(1M) access single-user mode
sundiag sundiag(1M) SunOS hardware diagnostic program
suninstall suninstall(1M) install the Solaris environment
swap swap(1M) swap administrative interface
swmtool swmtool(1M) install, upgrade, and remove software
packages
sxconfig sxconfig(1M) configure contiguous memory for the SX
video subsystem
sync sync(1M) update the super block
syncinit syncinit(1M) set serial line interface operating
parameters.
syncloop syncloop(1M) synchronous serial loopback test
program
syncstat syncstat(1M) report driver statistics from a
- synchronous serial link.
-
-
sys-unconfig sys-unconfig(1M) undo a system's configuration
sysdef sysdef(1M) output system definition
sysidconfig sysidconfig(1M) execute system configuration
- applications, or define set of system
- configuration applications
-
-
sysidnet sysidtool(1M) system configuration
sysidnis sysidtool(1M) system configuration
sysidroot sysidtool(1M) system configuration
sysidsys sysidtool(1M) system configuration
sysidtool sysidtool(1M) system configuration
syslogd syslogd (1M) log system messages
talkd in.talkd(1M) server for talk program
tapes tapes(1M) adds /dev entries for tape drives
- attached to the system
-
-
taskstat taskstat(1M) prints ASET tasks status
telinit init(1M) process control initialization
telnetd in.telnetd(1M) DARPA TELNET protocol server
test_eisa test_eisa(1M) dump the EISA NVRAM
tftpd in.tftpd(1M) Internet Trivial File Transfer
Protocol server
tic tic(1M) terminfo compiler
tnamed in.tnamed(1M) DARPA trivial name server
-
-
ttyadm
-
ttyadm(1M)
- format and output port
- monitor-specific information
-
-
ttyhstmgr ttyhstmgr(1M) administer hosts on a network
ttymon ttymon(1M) port monitor for terminal ports
tunefs tunefs(1M) tune up an existing file system
turnacct acctsh(1M) shell procedures for accounting
uadmin uadmin(1M) administrative control
ufsdump ufsdump(1M) incremental file system dump
ufsrestore ufsrestore(1M) incremental file system restore
umount mount (1M) mount or unmount file systems and
remote resources
umountall mountall(1M) mount, unmount multiple file systems
unlink link(1M) link and unlink files and directories
unshare unshare(1M) make local resource unavailable for
- mounting by remote systems
-
-
unshare_nfs
-
unshare_nfs(1M)
- make local NFS filesystems unavailable
- for mounting by remote systems
-
-
unshareall shareall(1M) share, unshare multiple resources
useradd useradd(1M) administer a new user login on the
system
userdel userdel(1M) delete a user's login from the system
usermod usermod (1M) modify a user's login information on
the system
utmp2wtmp acct(1M) overview of accounting and
- miscellaneous accounting commands
-
-
uucheck
-
uucheck(1M)
- check the uucp directories and
- permissions file
-
-
uucico
-
uucico(1M)
- file transport program for the uucp
- system
-
-
uucleanup uucleanup(1M) uucp spool directory clean-up
uucpd in.uucpd(1M) UUCP server
uusched uusched(1M) the scheduler for the uucp file
transport program
Uutry Uutry(1M) try to contact remote system with
debugging on
uutry Uutry(1M) try to contact remote system with
debugging on
uuxqt uuxqt(1M) execute remote command requests
vmstat vmstat(1M) report virtual memory statistics
volcopy volcopy(1M) make an image copy of file system
volcopy_ufs volcopy_ufs(1M) make an image copy of a ufs file
system
vold vold(1M) Volume Management daemon to manage
- CD-ROM and floppy devices
-
-
wall
-
wall(1M)
- write to all users
-
-
wchrtbl
-
chrtbl(1M)
- generate character classification and
- conversion tables
-
-
whodo whodo(1M) who is doing what
wtmpfix fwtmp(1M) manipulate connect accounting records
ypbind ypbind(1M) NIS binder process
ypinit ypinit(1M) set up NIS client
ypmake ypmake(1M) rebuild NIS database
yppoll yppoll (1M) return current version of a NIS map at
a NIS server host
ypset ypset(1M) point ypbind at a particular server
ypxfr ypxfr(1M) transfer NIS map from a NIS server to
host
zdump zdump(1M) time zone dumper
zic zic(1M) time zone compiler
|
|
